[1] 冯艾寒,李渤渤,沈军. Ti2AlNb基合金的研究进展[J]. 材料与冶金学报, 2011, 10(1):30-38. FENG Aihan, LI Bobo, SHEN Jun. Recent advances on Ti2AlNb-based alloys[J]. Journal of Materials and Metallurgy, 2011, 10(1):30-38. [2] 方爽,熊华平,程耀永,等. Ti2AlNb粉末与Ti/Al纳米叠层箔带混合烧结高温微叠层材料的微观结构[J]. 机械工程学报, 2017, 53(6):73-79. FANG Shuang, XIONG Huaping, CHENG Yaoyong, et al. Preparation and microstructure characterization of high temperature micro-laminated materials of Ti2AlNb alloy powder and Ti/Al nano-mutilayer foil by hot-pressed sintering[J]. Journal of Mechanical Engineering, 2017, 53(6):73-79. [3] 张建伟,李世琼,梁晓波. Ti3Al和Ti2AlNb基合金的研究与应用[J]. 中国有色金属学报, 2010, 20(1):336-341. ZHANG Jianwei, LI Shiqiong, LIANG Xiaobo. Research and application of Ti3Al and Ti2AlNb-based alloys[J]. The Chinese Journal of Nonferrous Metals, 2010, 20(1):336-341. [4] 沈强,张联盟,袁润章.梯度功能材料的研究现状与展望[J]. 中国陶瓷, 1996, 32(2):37-40, 12. SHEN Qiang, ZHANG Lianmeng, YUAN Runzhang. The current research status and prospect of functionally gradient materials[J]. Chinese Ceramics, 1996, 32(2):37-40, 12. [5] LEWIS G K, SCHLIENGER E. Practical considerations and capabilities for laser assisted direct metal deposition[J]. Materials and Design, 2000, 21(4):417-423. [6] WENG F, CHEN C Z, YU H J. Research status of laser cladding on titanium and its alloys:A review[J]. Materials and Design, 2014, 58:412-425. [7] WANG F D, MEI J, WU X H. Compositionally graded Ti6Al4V/TiC made by direct laser fabrication using powder and wire[J]. Materials and Design, 2007, 28:2040-2046. [8] VAMSI K B, BALLA V K. Fabrication of compositionally and structurally graded Ti-TiO2 structures using laser engineered net shaping(LENS)[J]. Acta Biomaterialia, 2009, 5:1831-1837. [9] 程晶,张永忠,高士友,等. Al/SiC复合材料激光快速成形的研究[J].稀有金属, 2002(3):179-182. CHENG Jing, ZHANG Yongzhong, GAO Shiyou, et al. Al/SiC composite made by laser direct deposition[J]. Chinese Journal of Rare Metals, 2002(3):179-182. [10] 马世榜,夏振伟,徐杨,等. 激光熔覆原位自生TiC颗粒增强镍基复合涂层的组织与耐磨性[J]. 材料工程, 2017, 45(6):24-30. MA Shibang, XIA Zhengwei, XU Yang, et al. Microstructure and abrasion resistance of in-situ TiC particles reinforced Ni-based composite coatings by laser cladding[J]. Journal of Materials Engineering, 2017, 45(6):24-30. [11] BARSOUM M W, EL-RAGHY T. Synthesis and characterization of a remarkable ceramic:Ti3SiC2[J]. Journal of the American Ceramic Society, 1996, 79:1953-1956. [12] LI S N, XIONG H P, LI N, et al. Mechanical properties and formation mechanism of Ti/SiC system gradient materials fabricated by in-situ reaction laser cladding[J]. Ceramics International, 2017, 43:961-967. [13] 闫文青,桂赤斌,戴乐. TIG熔敷Ti-Si-C系统在Ti-5Al-2.5Sn表面形成陶瓷涂层的化学反应分析[J]. 焊接学报, 2014, 35(10):77-80. YAN Wenqing, GUI Chibin, DAI Le. Chemical reaction of ceramic coatings of Ti-Si-C system onTi-5Al-2.5Sn substrate prepared by tungsten inert-gas arc cladding[J]. Transactions of China Welding Institution, 2014, 35(10):77-80. [14] SHUSTER J C. Design criteria and limitations for SiC-metal and Si3N4-metal joints derived from phase diagram studies of the systems Si-C-metal and Si-N-metal. Structural Ceramics Joining Ⅱ(C)//Ceramic Transactions, Westerville, Ohio:American Ceramics Society, 1993, 43-57. [15] 闫文青,张建强,刘升. 氩弧熔敷Ti-Si-C系陶瓷涂层中物相的热力学预测[J]. 焊接学报, 2017, 38(5):108-111. YAN Wenqing, ZHANG Jianqiang, LIU Sheng. Thermodynamic prediction for phases of ceramic coatings in Ti-Si-C system by argon arc depositing[J]. Transactions of China Welding Institution, 2014, 35(10):77-80. [16] DU Y, SHUSTER J C. Experimental investigation and thermodynamic calculation of the titanium-silicon-carbon system[J]. Journal of the American Ceramic Society, 2000, 83(1):197-203. [17] 叶大伦,胡建华.实用无机物热力学数据手册[M]. 2版.北京:机械工业出版社, 2009. YE Dalun, HU Jianhua. A handbook for practical inorganic thermodynamics data[M]. 2nd ed. Beijing:China Machine Press, 2009. [18] MIN K S, ARDELL A J, ECK S J, et al. A small-specimen investigation of the fracture toughness of Ti5Si3[J]. Journal of Materials Science, 1995, 30:5479-5483. [19] ROSENKRANZ R, FROMMEYER G, SMARSLY W. Microstructures and properties of high melting point intermetallic Ti5Si3 and TiSi2 compounds[J]. Materials Science and Engineering:A, 1992, 152:288-294. [20] KRZANOWSKI J E, KOUTZAKI S H. Mechanical properties of sputter-deposited titanium-silicon-carbon films[J]. Journal of the American Ceramic Society, 2001, 84(3):672-674. [21] OHRING M. The materials science of thin films[M]. Boston, MA:Academic Press, 1992. |