基于相位调控的二维超声辅助砂带磨削方法及其对GH4169表面完整性研究

doi:10.3901/JME.2024.21.349

机械工程学报 ›› 2024, Vol. 60 ›› Issue (21): 349-364.doi: 10.3901/JME.2024.21.349

扫码分享

基于相位调控的二维超声辅助砂带磨削方法及其对GH4169表面完整性研究

李少川^1,2, 肖贵坚^2,3, 曹华军^2,3, 汪迎新², 赵泽勇², 卓晓琴², 黄云^2,3

1. 郑州轻工业大学机电工程学院郑州 450002;
2. 重庆大学机械与运载工程学院重庆 400044;
3. 高端装备机械传动全国重点实验室重庆 400044

收稿日期:2023-12-08 修回日期:2024-05-11 出版日期:2024-11-05 发布日期:2024-12-24
通讯作者: 肖贵坚，男，1986年出生，博士，副教授，博士研究生导师。主要研究方向为多能场协同材料去除、微纳结构激光砂带协同加工、超声辅助加工表面及其服役性能、复杂曲面加工编程及机器人控制、高服役加工参数优化与智能决策。E-mail：xiaoguijian@cqu.edu.cn
作者简介:李少川,男,1993年出生,博士,讲师。主要研究方向为超声辅助加工、抗疲劳表面加工以及砂带磨削。E-mail:lishaochuanCQU@163.com;曹华军,男,1978年出生,博士,教授,博士研究生导师。主要研究方向为绿色制造、高速干切工艺与装备。E-mail:hjcao@cqu.edu.cn;黄云,男,1962年出生,博士,教授,博士研究生导师。主要研究方向为超精密加工理论与技术;智能制造装备;抗疲劳制造技术。E-mail:hjcao@cqu.edu.cn
基金资助:
国家重点研发计划(2020YFB2010500)、山东省科技型中小企业创新能力提升工程(2022TSGC1115)和山东省自然科学基金(ZR2023QE057，ZR2022QE028，ZR2021QE116，ZR2020KE027)资助项目。

Two-dimensional Ultrasound-assisted Belt Grinding Method Based on Phase Regulation and its Effect on the Surface Integrity of GH4169

LI Shaochuan^1,2, XIAO Guijian^2,3, CAO Huajun^2,3, WANG Yingxin², ZHAO Zeyong², ZHUO Xiaoqin², HUANG Yun^2,3

1. College of Mechanical and Electrical Engineering, Zhengzhou University of Light Industry, Zhengzhou 450002;
2. College of Mechanical and Vehicle Engineering, Chongqing University, Chongqing 400044;
3. State Key Laboratory of Mechanical Transmissions, Chongqing 400044

Received:2023-12-08 Revised:2024-05-11 Online:2024-11-05 Published:2024-12-24

摘要/Abstract

摘要： 镍基高温合金加工过程易产生表面损伤，且服役性能对表面纹理和缺陷具有强相关性。同时，复杂载荷状态对构件表面提出了各向同性加工需求。融合砂带磨削柔性、低损伤特点和超声辅助加工纹理优化优势，提出了二维超声辅助砂带磨削方法。分析了不同工艺参数下磨粒运动轨迹，基于单颗粒划擦试验分析了超声方向、振幅和相位对材料去除行为的影响，并揭示了工艺参数对GH4169表面完整性及其均匀性的影响规律。结果表明：二维超声辅助砂带磨削具有较好的纹理优化效果，同时可以获得均匀塑性变形层。通过相位调控可以制备出类网状纹理，抑制了表面完整性各向异性。相位差90°时表面完整性及分布一致性较好，其中较大振幅可以提升表面残余压应力、降低表面粗糙度。纹理优化和材料去除之间存在竞争机制，较低进给速度可以获得较小表面粗糙度和较大残余压应力。

关键词: 超声辅助磨削, 平面二维超声振动, 砂带磨削, 表面完整性, 各向异性, GH4169

Abstract: Nickel-based superalloys are prone to surface damage during machining, and its service performance has strong correlation with surface texture and defects. Meanwhile, complex load puts forward isotropic processing requirements. Combining flexible and low damage of belt grinding and texture optimization of ultrasonic-assisted machining, two-dimensional ultrasonic-assisted belt grinding method is proposed. The abrasive trajectory under different parameters is analyzed, and the influence of ultrasonic direction, amplitude and phase on material removal is analyzed based on single-particle scratch test. The influence of process parameters on surface integrity and uniformity of GH4169 is also revealed. Results show that two-dimensional ultrasonic-assisted belt grinding has texture optimization effect, and can obtain uniform plastic deformation layer. Reticulum-like texture can be prepared and the anisotropy of surface integrity can be suppressed. Phase difference of 90°improves surface integrity and consistency. Large amplitude can increase residual compressive stress and reduce surface roughness. Low feed speed result in small roughness and large residual compressive stress.

Key words: ultrasonic assisted grinding, planar two-dimensional ultrasonic vibration, abrasive belt grinding, surface integrity, anisotropy, GH4169

中图分类号:

TG156

李少川, 肖贵坚, 曹华军, 汪迎新, 赵泽勇, 卓晓琴, 黄云. 基于相位调控的二维超声辅助砂带磨削方法及其对GH4169表面完整性研究[J]. 机械工程学报, 2024, 60(21): 349-364.

LI Shaochuan, XIAO Guijian, CAO Huajun, WANG Yingxin, ZHAO Zeyong, ZHUO Xiaoqin, HUANG Yun. Two-dimensional Ultrasound-assisted Belt Grinding Method Based on Phase Regulation and its Effect on the Surface Integrity of GH4169[J]. Journal of Mechanical Engineering, 2024, 60(21): 349-364.

导出引用管理器 EndNote|Reference Manager|ProCite|BibTeX|RefWorks

链接本文: http://www.cjmenet.com.cn/CN/10.3901/JME.2024.21.349

http://www.cjmenet.com.cn/CN/Y2024/V60/I21/349

参考文献

[1] BARTOLOMEIS A D，NEWMAN S T，JAWAHIR I S，et al. Future research directions in the machining of Inconel 718[J]. Journal of Materials Processing Technology，2021，297：117260.
[2] DAVID B，EVA M R，MARTA M M，et al. Advanced materials and multi-materials applied in aeronautical and automotive fields: A systematic review approach[J]. Procedia CIRP，2021，99：196-201.
[3] 郭东明. 高性能制造[J]. 机械工程学报，2022，58(21)：225-242. GUO Dongming. High performance manufacturing[J]. Journal of Mechanical Engineering，2022，58(21)：1-18.
[4] LI X，YANG S L，LU Z H，et al. Influence of ultrasonic peening cutting on surface integrity and fatigue behavior of Ti-6Al-4V specimens[J]. Journal of Materials Processing Technology，2020，275：116386.
[5] DANG J Q，AN Q L，LIAN G H，et al. Surface modification and its effect on the tensile and fatigue properties of 300M steel subjected to ultrasonic surface rolling process[J]. Surface & Coatings Technology，2021，422：127566.
[6] KUMAR S A，KUMAR A，SHARMA V，et al. Sustainable techniques in grinding: State of the art review[J]. Journal of Cleaner Production，2020，269：121876.
[7] YANG Z C，ZHU L D，ZHANG G X，et al. Review of ultrasonic vibration-assisted machining in advanced materials[J]. International Journal of Machine Tools & Manufacture，2020，156：103594.
[8] 丁文锋，曹洋，赵彪，等. 超声振动辅助磨削加工技术及装备研究的现状与展望[J]. 机械工程学报，2022，58(9)：244-269. DING Wenfeng，CAO Yang，ZHAO Biao，et al. Research status and future prospects of ultrasonic vibration-assisted grinding technology and equipment[J]. Journal of Mechanical Engineering，2022，58(9)：244-269.
[9] 王先逵，李洪斌. 超声砂带精密磨削技术[J]. 航空精密制造技术，1987(4)：19-23. WANG Xiankui，LI Hongbin. Ultrasonic abrasive belt precision grinding technology[J]. Aviation Precision Manufacturing Technology，1987(4)：19-23.
[10] 李华，任坤，殷振，等. 超声振动辅助磨料流抛光技术研究综述[J]. 机械工程学报，2021，57(9)：233-253. LI Hua，REN Kun，YIN Zhen，et al. Review of ultrasonic vibration-assisted abrasive flow polishing technology[J]. Journal of Mechanical Engineering，2021，57(9)：233-253.
[11] 殷森，鲍岩，潘延安，等. 具有多级放大功能的超声椭圆振动切削装置的设计[J]. 机械工程学报，2022，58(11)：260-268. YIN Sen，BAO Yan，PAN Yanan，et al. Development of ultrasonic elliptical vibration cutting device with multi-stage amplification function[J]. Journal of Mechanical Engineering，2022，58(11)：260-268.
[12] ZHAO B，CHANG B Q，WANG X B，et al. System design and experimental research on ultrasonic assisted elliptical vibration grinding of Nano-ZrO₂ ceramics[J]. Ceramics International，2019，45：24865–24877.
[13] CAO Y，YIN J F，DING W F，et al. Alumina abrasive wheel wear in ultrasonic vibration-assisted creep-feed grinding of Inconel 718 nickel-based superalloy[J]. Journal of Materials Processing Tech，2021，297：117241.
[14] CAO Y，ZHAO B，DING W F，et al. On the tool wear behavior during ultrasonic vibration-assisted form grinding with alumina wheels[J]. Ceramics International，2021，47：26465–26474.
[15] LI Z，YUAN S M，MA J，et al. Study on the surface formation mechanism in scratching test with different ultrasonic vibration forms[J]. Journal of Materials Processing Technology，2021，294：117108.
[16] ZHOU W H，TANG J Y，CHEN H F，et al. A comprehensive investigation of surface generation and material removal characteristics in ultrasonic vibration assisted grinding[J]. International Journal of Mechanical Sciences，2019，156：14–30.
[17] JIANG J L，SUN S F，WANG D X，et al. Surface texture formation mechanism based on the ultrasonic vibration- assisted grinding process[J]. International Journal of Machine Tools & Manufacture，2020，156：103595.
[18] 别文博，赵波，高国富，等. 切向超声振动辅助成形磨削齿轮的切削系数建模与试验研究[J]. 机械工程学报，2022，58(7)：295-308. BIE Wenbo，ZHAO Bo，GAO Guofu，et al. Analytical modeling and experimental investigation on cutting coefficient during tangential ultrasonic vibration-assisted forming grinding gear[J]. Journal of Mechanical Engineering，2022，58(7)：295-308.
[19] FU Y Z，GAO H，WANG X P，et al. Machining the integral impeller and blisk of aero-engines：A review of surface finishing and strengthening technologies[J]. Chinese Journal of Mechanical Engineering，2017，30(3)：528-543.
[20] XIAO G J，ZHANG Y D，ZHU B，et al. Wear behavior of alumina abrasive belt and its effect on surface integrity of titanium alloy during conventional and creep-feed grinding[J]. Wear，2023，514-515：204581.
[21] LI S C，XIAO G J，CHEN B Q，et al. Surface formation modeling and surface integrity research of normal ultrasonic assisted flexible abrasive belt grinding[J]. Journal of Manufacturing Processes，2022，80：232-246.
[22] LI S C，XIAO G J，ZHUO X Q，et al. Fatigue performance and failure mechanism of ultrasonic-assisted abrasive- belt-ground Inconel 718[J]. International Journal of Fatigue，2023，168：107406.
[23] ZHU L D，NI C B，YANG Z C，et al. Investigations of micro-textured surface generation mechanism and tribological properties in ultrasonic vibration-assisted milling of Ti-6Al-4V[J]. Precision Engineering，2019，57：229-243.
[24] CHEN S Q，ZHAO W X，YAN P，et al. Effect of milling surface topography and texture direction on fatigue behavior of ZK61M magnesium alloy[J]. International Journal of Fatigue，2022，156：106669.
[25] LIANG Z Q，WU Y B，WANG X B，et al. A new two-dimensional ultrasonic assisted grinding (2D-UAG) method and its fundamental performance in monocrystal silicon machining[J]. International Journal of Machine Tools & Manufacture，2010，50：728-736.
[26] GAO T，ZHANG X P，LI C H，et al. Surface morphology evaluation of multi-angle 2D ultrasonic vibration integrated with nanofluid minimum quantity lubrication grinding[J]. Journal of Manufacturing Processes，2020，51：44-61.

基于相位调控的二维超声辅助砂带磨削方法及其对GH4169表面完整性研究

Two-dimensional Ultrasound-assisted Belt Grinding Method Based on Phase Regulation and its Effect on the Surface Integrity of GH4169

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	夏子文, 单晨伟, 张猛猛, 刘文港, 崔敏超, 罗明. 超声椭圆振动铣削GH4169切削特性及亚表层力学性能研究[J]. 机械工程学报, 2026, 62(7): 439-451.
[2]	刘家旭, 汪大成, 师明杰, 陈帅峰, 张士宏, 程明. 航空叶片板式楔横轧-模锻复合成形中的组织演变研究[J]. 机械工程学报, 2026, 62(6): 87-99.
[3]	白昭若, 黄康华, 汤明军, 丰淑龙, 冯峰, 张建富, 冯平法, 张翔宇. 承力孔孔边倒角高速超声冲击强化方法及表面完整性研究[J]. 机械工程学报, 2026, 62(5): 434-442.
[4]	罗智超, 唐倩, 宋军, 张远航, 陈俊杰, 马帅, 冯琪翔. 四方对称TPMS晶格结构的设计及各向异性分析[J]. 机械工程学报, 2026, 62(1): 347-360.
[5]	吴婧, 周坤, 江桂云, 黄云. SiC_f/SiC复合材料激光诱导烧蚀辅助砂带磨削机理与工艺性能评价[J]. 机械工程学报, 2026, 62(1): 395-407.
[6]	朱平忠, 朱祥龙, 张晶, 徐念伟, 隗雨欣, 董志刚. 金刚石压头超声辅助划擦定向凝固镍基高温合金材料去除行为研究[J]. 机械工程学报, 2026, 62(1): 448-456.
[7]	李靖, 徐天昊, 罗明. 压气机叶片高性能切削加工技术研究进展[J]. 机械工程学报, 2025, 61(9): 23-45.
[8]	李伟, 黄紫藤, 李松松, 于辉, 罗许. 基于各向异性的薄带冷轧变形区接触压力模型研究[J]. 机械工程学报, 2025, 61(8): 127-137.
[9]	于天, 刘志成, 李瑶, 万晓飞, 焦宗夏, 尚耀星. 碳纤维液压缸热-力耦合模型与分析[J]. 机械工程学报, 2025, 61(8): 308-318.
[10]	陈鑫, 龚颖颖, 杨立飞. 考虑各向异性和剪切行为的GTN损伤模型及其在成形极限预测中的应用[J]. 机械工程学报, 2025, 61(6): 141-150.
[11]	党嘉强, 安庆龙, 李宇罡, 明伟伟, 王浩伟, 刘忠明, 陈明. 航空齿轮齿根磨削和超声滚压表面完整性分布规律研究[J]. 机械工程学报, 2025, 61(5): 343-353.
[12]	林艳丽, 王家明, 刘军鹏, 苏一博, 王硕, 何祝斌. 金属薄板杯形件拉深制耳定量预测理论模型[J]. 机械工程学报, 2025, 61(4): 96-106.
[13]	张坤, 白雪山, 孙进, 胡馨予, 林艳丽, 何祝斌. 各向异性屈服准则对铝合金挤压管液压成形仿真精度的影响[J]. 机械工程学报, 2025, 61(4): 167-175.
[14]	姚梦佳, 王睿乾, 刘伟. 2195铝锂合金超低温变形各向异性行为及组织演变规律[J]. 机械工程学报, 2025, 61(14): 73-80.
[15]	黄潇辉, 李聪波, 陶桂宝, 张友, 张乘辉, 曹华军. 新能源汽车齿轮高效精密加工技术与装备研究进展[J]. 机械工程学报, 2025, 61(13): 45-66.