• CN:11-2187/TH
  • ISSN:0577-6686

机械工程学报 ›› 2026, Vol. 62 ›› Issue (17): 430-442.doi: 10.3901/JME.260706

• 制造工艺与装备 • 上一篇    

扫码分享

γ-TiAl合金缓进磨削热力耦合特性及表面完整性研究

史恺宁1,2, 李虎虎1,2, 牛湛皓3, 李佳乐1,2, 张兆顷1,2   

  1. 1. 西北工业大学航空发动机高性能制造工业和信息化部重点实验室 西安 710072;
    2. 西北工业大学航空发动机先进制造技术教育部工程研究中心 西安 710072;
    3. 中航西安飞机工业集团股份有限公司 西安 710089
  • 收稿日期:2025-09-11 修回日期:2025-12-26 发布日期:2026-11-20
  • 作者简介:史恺宁(通信作者),男,1986年出生,博士,副研究员,博士研究生导师。主要研究方向为难加工材料高效精密磨削技术、表面完整性抗疲劳制造。E-mail:shikaining@nwpu.edu.cn
  • 基金资助:
    中央高校基础研究基金(HYGJZN202319)资助项目。

Study on the Thermo-mechanical Coupling Characteristics and Surface Integrity of Creep Feed Grinding of γ-TiAl Alloys

SHI Kaining1,2, LI Huhu1,2, NIU Zhanhao3, LI Jiale1,2, ZHANG Zhaoqing1,2   

  1. 1. Key Laboratory of High Performance Manufacturing for Aero Engine (Ministry of Industry and Information Technology), Northwestern Polytechnical University, Xi'an 710072;
    2. Engineering Research Center of Advanced Manufacturing Technology for Aero Engine (Ministry of Education), Northwestern Polytechnical University, Xi'an 710072;
    3. AVIC Xi'An Aircraft Industry Group Co., Ltd., Xi'an 710089
  • Received:2025-09-11 Revised:2025-12-26 Published:2026-11-20

摘要: γ-TiAl合金因其优异的抗疲劳性及抗高温氧化性,成为航空发动机关键构件潜在应用的新型材料之一。然而,此类材料存在热加工窗口窄、应变敏感性强以及本征脆性等特性,使其在切削过程中受热力载荷作用影响易产生残余拉应力、微观裂纹、烧伤等加工损伤及缺陷。针对第三代γ-TiAl合金(TNM)缓进磨削加工表面完整性难控制的问题,通过开展有限元仿真与磨削试验分析,研究了工艺参数对磨削力热的影响规律以及热力耦合作用引起的表面状态差异,揭示了TNM合金缓进磨削表面完整性形成机制。结果表明,磨削力及磨削温度随工艺参数的增大均呈现出了显著的变化规律,相较于磨削温度,磨削力的变化对TNM合金表面完整性的影响更为显著;随着磨削热力耦合作用的增强,磨削表面形貌产生了规律性的退化,表面粗糙度增大,表面硬化现象凸显,硬化层加深;磨削表面整体呈残余压应力状态,但随着磨削温度的升高,残余压应力逐步减小,位错缠结特征增多,塑性变形层厚度增加。通过试验结果建立的磨削工艺参数-热力耦合-表面完整性一体化模型可为TNM合金缓进磨削高表面完整性的工艺参数优选提供理论依据和技术支撑。

关键词: γ-TiAl合金, 缓进磨削, 工艺参数, 热力耦合, 表面完整性

Abstract: γ-TiAl alloys are recognized as promising materials for critical components in aero-engines due to their superior fatigue resistance and high-temperature oxidation resistance. However, challenges such as narrow thermal processing windows, strain sensitivity, and intrinsic brittleness lead to machining-induced damages and defects, including residual tensile stresses, microcracks, and burns, under thermomechanical loads during cutting processes. To address the difficulty in controlling surface integrity during creep-feed grinding of third-generation γ-TiAl alloys (TNM), the influence of process parameters on grinding forces and temperatures, as well as surface state variations induced by thermomechanical coupling, are investigated through finite element simulations and grinding experiments. The formation mechanisms of surface integrity in TNM alloy creep-feed grinding are elucidated. Results demonstrate that grinding forces and temperatures exhibit distinct variation patterns with increasing process parameters, where grinding forces exert a more significant impact on surface integrity than temperatures. As thermomechanical coupling intensifies, surface morphology degrades systematically, surface roughness increases, hardening effects become pronounced, and hardened layer thickness deepens. Residual compressive stresses dominate the ground surface, but their magnitude gradually diminishes with rising grinding temperatures, accompanied by increased dislocation entanglement and thickened plastic deformation layers. An integrated model correlating grinding parameters, thermomechanical coupling, and surface integrity is established, providing theoretical and technical guidance for optimizing high-integrity creep-feed grinding processes of TNM alloys.

Key words: γ-TiAl alloy, creep feed grinding, processing parameters, thermo-mechanical coupling, surface integrity

中图分类号: