斜杆拉簧负刚度机制的恒值准零刚度超低频隔振设计

doi:10.3901/JME.2024.17.223

摘要/Abstract

摘要： 准零刚度隔振器相比线性隔振器，具有宽频、低传递率的优良隔振性能，是一种应用前景较好的被动式隔振器。但单个静态平衡点的准零刚度隔振器在变承载质量隔振、大幅激励隔振方面存在问题，因此基于斜杆拉簧恒值负刚度机制构造了恒值准零刚度隔振器，推导出了恒值准零刚度、非恒值准零刚度、零刚度的参数条件，分析了参数影响下的准零刚度特性和规律。设计并制造了实验模型，根据恒值准零刚度参数条件装配实验模型，通过万能试验机获得了实验模型的力位移曲线，与理论预测值一致性较好，验证了静态分析理论。随后采用Polytec激光测振仪和振动台对恒值准零刚度实验模型开展了动态实验，获得的实验传递率与理论预测值一致性较好，具有起始隔振频率接近1 Hz的较宽频带和较低传递率幅值。

关键词: 隔振, 准零刚度, 恒值准零刚度, 阻尼, 实验

Abstract: Compared with linear vibration isolator, quasi-zero stiffness vibration isolator has excellent vibration isolation performance with wide frequency and low transmissibility, and it is a kind of passive vibration isolator with better application prospect. However, the quasi-zero stiffness isolator with a single static equilibrium point has problems in the variable bearing mass isolation and large excitation isolation. For solving the problems, a constant-value quasi-zero stiffness isolator is constructed by using the constant-value negative stiffness mechanism of oblique bars and tension springs. The parameter conditions of constant-value quasi-zero stiffness, non-constant-value quasi-zero stiffness and zero stiffness are derived, as well as the characteristics of quasi-zero stiffness and the law under the influence of the parameters are analyzed. The experimental model is then designed, manufactured and assembled according to the constant-value quasi-zero stiffness parameter conditions. The universal testing machine is used to obtain the force-displacement curves which corresponded well with theoretical predictions, providing verification for the static analysis theory. Subsequently, the Polytec laser vibrometer and the shaking table are used to collect dynamic experiments results on the experimental model with constant-value quasi-zero stiffness. The experimental transmissibility is consistent with theoretical predictions well. The isolator has the wide bandwidth with the starting isolation frequency of close to 1 Hz and low transmissibility amplitude.

Key words: vibration isolation, quasi-zero stiffness, constant QZS, damping, experiment

中图分类号:

O328

赵峰, 秦浦, 杜文辽, 王才东, 曹树谦. 斜杆拉簧负刚度机制的恒值准零刚度超低频隔振设计[J]. 机械工程学报, 2024, 60(17): 223-234.

ZHAO Feng, QIN Pu, DU Wenliao, WANG Caidong, CAO Shuqian. Constant Quasi-zero Stiffness Ultra-low Frequency Vibration Isolator Design Based on Negative Stiffness Mechanism Composed of Oblique Bars and Tension Spring[J]. Journal of Mechanical Engineering, 2024, 60(17): 223-234.

参考文献

[1] CUI Zhining, YU Xiaoguang, RAN Ziqing, et al. Vibration reduction characteristics and vibration control of aviation hydraulic pipeline by hard coating[J]. Coatings, 2022, 12(6):775.
[2] YAN Ge, ZOU Hongxiang, WANG Sen, et al. Large stroke quasi-zero stiffness vibration isolator using three-link mechanism[J]. Journal of Sound and Vibration, 2020, 478:115344.
[3] MEI Huaping, TIAN Haoyue, HUANG Shuan. Recent study on the passive and active vibration isolators[J]. Applied Mechanics and Materials, 2014, 494-495:491-496.
[4] CARRELLA A, BRENNAN M J, WATERS T P. Optimization of a quasi-zero-stiffness isolator[J]. Journal of Mechanical Science and Technology, 2007, 21(6):946-949.
[5] 宋丹龙, 师朴, 杜春华, 等. 电梯垂直低频隔振器设计与分析[J]. 振动与冲击, 2022, 41(19):296-302. SONG Danlong, SHI Pu, DU Chunhua, et al. Design and analysis of elevator vertical low frequency vibration isolators[J]. Journal of Vibration and Shock, 2022, 41(19):296-302.
[6] BALAJI P S, SELVAKUMAR K K. Applications of nonlinearity in passive vibration control:A review[J]. Journal of Vibration Engineering & Technologies, 2021, 9(2):183-213.
[7] 宋春芳, 徐龙龙, 刘彦琦. 含水平非线性弹簧的准零刚度隔振系统的力传递率研究[J]. 应用力学学报, 2019, 36(2):356-363. SONG Chunfang, XU Longlong, LIU Yanqi. The force transmissibility of a quasi-zero stiffness isolation system with horizontal nonlinear springs[J]. Chinese Journal of Applied Mechanics, 2019, 36(2):356-363.
[8] 刘兴天, 黄修长, 张志谊, 等. 激励幅值及载荷对准零刚度隔振器特性的影响[J]. 机械工程学报, 2013, 49(6):89-94. LIU Xingtian, HUANG Xiuchang, ZHANG Zhiyi, et al. Influence of excitation amplitude and load on the characteristics of quasi-zero stiffness isolator[J]. Journal of Mechanical Engineering, 2013, 49(6):89-94.
[9] YE K, JI J C. An origami inspired quasi-zero stiffness vibration isolator using a novel truss-spring based stack miura-ori structure[J]. Mechanical Systems and Signal Processing, 2022, 165:108383.
[10] LIU Yanqi, JI Wen, GU Huangsen, et al. Force transmissibility of a 6-DOF passive quasi-zero stiffness vibration isolation platform[J]. Journal of Mechanical Science and Technology, 2021, 35(6):2313-2324.
[11] GATTI G, SHAW A D, GONçALVES P J P, et al. On the detailed design of a quasi-zero stiffness device to assist in the realisation of a translational lanchester damper[J]. Mechanical Systems and Signal Processing, 2022, 164:108258.
[12] XIONG Yuanhao, LI Fengming, WANG Yu. A nonlinear quasi-zero-stiffness vibration isolation system with additional X-shaped structure:theory and experiment[J]. Mechanical Systems and Signal Processing, 2022, 177:109208.
[13] ZHANG Xiaohan, CAO Qingjie, QIU Hanqing, et al. Dynamic analysis of a loading-adapting quasi-zero-stiffness isolation system based on the rolling lobe air-springs[J]. Journal of Vibration Engineering & Technologies, 2022, 10(8):3207-3225.
[14] 谷理想, 孙维光, 葛洪峰, 等. 高速动车组车下设备准零刚度吊挂研究[J]. 机械设计与制造工程, 2022, 51(12):24-27. GU Lixiang, SUN Weiguang, GE Hongfeng, et al. Study on quasi-zero stiffness suspension of high-speed EMU[J]. Machine Design and Manufacturing Engineering, 2022, 51(12):24-27.
[15] 肖庆雨, 周加喜, 徐道临, 等. 一种六自由度准零刚度隔振平台[J]. 振动与冲击, 2019, 38(1):258-264. XIAO Qingyu, ZHOU Jiaxi, XU Daolin, et al. A 6-DOF quasi-zero stiffness vibration isolation platform[J]. Journal of Vibration and Shock, 2019, 38(1):258-264.
[16] 杜永刚, 王雪松, 王禺林. 一种全金属六自由度隔振平台的研究[J]. 机械工程学报, 2023, 59(1):188-198. DU Yonggang, WANG Xuesong, WANG Yulin. Research on an all-metal vibration isolation platform with six DOFs[J]. Journal of Mechanical Engineering, 2023, 59(1):188-198.
[17] 周加喜, 王心龙, 徐道临, 等. 含凸轮-滚轮机构的准零刚度系统隔振特性实验研究[J]. 振动工程学报, 2015, 28(3):449-455. ZHOU Jiaxi, WANG Xinlong, XU Daolin, et al. Experimental study on vibration isolation characteristics of the quasi-zero stiffness isolator with cam-roller mechanism[J]. Journal of Vibration Engineering, 2015, 28(3):449-455.
[18] 刘海平, 申大山, 赵鹏鹏. 非线性三参数隔振器动力学特性研究[J]. 振动工程学报, 2021, 34(3):490-498. LIU Haiping, SHEN Dashan, ZHAO Pengpeng. Dynamic performance of a three-parameter isolator with nonlinear characteristic[J]. Journal of Vibration Engineering, 2021, 34(3):490-498.
[19] 王凯, 周加喜, 蔡昌琦, 等. 低频弹性波超材料的若干进展[J]. 力学学报, 2022, 54(10):2678-2694. WANG Kai, ZHOU Jiaxi, CAI Changqi, et al. Review of low-frequency elastic wave metamaterials[J]. Chinese Journal of Theoretical and Applied Mechanics, 2022, 54(10):2678-2694.
[20] 刘玉成, 何强, 罗永利, 等. 变压器准零刚度隔振平台非共振响应[J]. 应用力学学报, 2020, 37(6):2463-2469. LIU Yucheng, HE Qiang, LUO Yongli, et al. Nonresonant response of quasi-zero stiffness platform for power transformer[J]. Chinese Journal of Applied Mechanics, 2020, 37(6):2463-2469.
[21] ZHENG Yisheng, ZHANG Xinong, LUO Yajun, et al. Harnessing the compressed-spring mechanism for a six-degrees-of-freedom quasi-zero-stiffness vibration isolation platform[J]. Journal of Vibration and Control, 2021, 27(15-16):1793-1805.
[22] ZHOU Zhenhua, DAI Zhihui, LIU Zhiqiang, et al. An adjustable low frequency vibration isolation with high-static-stiffness low-dynamic-stiffness property using a novel negative stiffness element[J]. Applied Acoustics, 2022, 188:108571.
[23] YANG J, NING D, SUN S S, et al. A semi-active suspension using a magnetorheological damper with nonlinear negative-stiffness component[J]. Mechanical Systems and Signal Processing, 2021, 147:107071.
[24] WANG Qiang, ZHOU Jiaxi, XU Daolin, et al. Design and experimental investigation of ultra-low frequency vibration isolation during neonatal transport[J]. Mechanical Systems and Signal Processing, 2020, 139:106633.
[25] MA Zhaozhao, ZHOU Ruiping, YANG Qingchao, et al. A semi-active electromagnetic quasi-zero-stiffness vibration isolator[J]. International Journal of Mechanical Sciences, 2023, 252:108357.
[26] LI Zhengchao, JING Xingjian, YU Jinyong. Fault detection based on a bio-inspired vibration sensor system[J]. IEEE Access, 2018, 6:10867-10877.
[27] GATTI G. Optimizing elastic potential energy via geometric nonlinear stiffness[J]. Communications in Nonlinear Science and Numerical Simulation, 2021, 103:106035.
[28] FRATERNALI F, SINGH N, AMENDOLA A, et al. A biomimetic sliding-stretching approach to seismic isolation[J]. Nonlinear Dynamics, 2021, 106(4):3147-3159.
[29] LI Ming, CHENG Wei, XIE Ruili. Design and experiments of a quasi-zero-stiffness isolator with a noncircular cam-based negative-stiffness mechanism[J]. Journal of Vibration and Control, 2020, 26(21-22):1935-1947.
[30] WANG Kai, ZHOU Jiaxi, CHANG Yaopeng, et al. A nonlinear ultra-low-frequency vibration isolator with dual quasi-zero-stiffness mechanism[J]. Nonlinear Dynamics, 2020, 101(2):755-773.
[31] ZENG Rong, WEN Guilin, ZHOU Jiaxi, et al. Experimental investigation of a non-smooth quasi-zero-stiffness isolator[J]. Acta Mechanica Sinica, 2023, 39(6):522415.
[32] 赵权, 李韶华, 冯桂珍. 一种准零刚度车载隔振系统的设计与试验研究[J]. 振动与冲击, 2021, 40(6):55-63. ZHAO Quan, LI Shaohua, FENG Guizhen. Design and test of a quasi-zero-stiffness vehicle vibration isolation system[J]. Journal of Vibration and Shock, 2021, 40(6):55-63.
[33] FULTON F, SOROKIN V S. Analysis of the effects of nonlinear damping on a multiple-degree-of-freedom quasi-zero-stiffness vibration isolator[J]. Mechanics Research Communications, 2023, 130:104121.
[34] HU Xiaoying, ZHOU Chunyan. The effect of various damping on the isolation performance of quasi-zero-stiffness system[J]. Mechanical Systems and Signal Processing, 2022, 171:108944.
[35] 周兴华, 杨啸, 孙晓, 等. 一种悬臂梁组合几何非线性结构准零刚度隔振器研究[J]. 振动与冲击, 2023, 42(11):232-239. ZHOU Xinghua, YANG Xiao, SUN Xiao, et al. Research on a quasi-zero stiffness vibration isolator equipped with cantilever beam and geometrically nonlinear structure[J]. Journal of Vibration and Shock, 2023, 42(11):232-239.
[36] 徐兴, 陈雷, 江昕炜, 等. 基于H_∞状态反馈的商用车准零刚度空气悬架系统半主动控制[J]. 机械工程学报, 2023, 59(12):306-317. XU Xing, CHEN Lei, JIANG Xinwei, et al. Semi-active control of quasi-zero stiffness air suspension system for commercial vehicles based on H_∞ state feedback[J]. Journal of Mechanical Engineering, 2023, 59(12):306-317.
[37] DENG Tianchang, WEN Guilin, DING Hu, et al. A bio-inspired isolator based on characteristics of quasi-zero stiffness and bird multi-layer neck[J]. Mechanical Systems and Signal Processing, 2020, 145:106967.
[38] XU Lixin, DAI Kaili, HAO Hongyu, et al. Effective frequency range and jump behavior of horizontal quasi-zero stiffness isolator[J]. Applied Sciences-Bsael, 2023, 13(3):1795.
[39] 孙秀婷, 钱佳伟, 齐志凤, 等. 非线性隔振及时滞消振方法研究进展[J]. 力学进展, 2023, 53(2):308-356. SUN Xiuting, QIAN Jiawei, QI Zhifeng, et al. Review on research progress of nonlinear vibration isolation and time-delayed suppression method[J]. Advances in Mechanics, 2023, 53(2):308-356.
[40] YAN Ge, WU Zhiyuan, WEI Xinsheng, et al. Nonlinear compensation method for quasi-zero stiffness vibration isolation[J]. Journal of Sound and Vibration, 2022, 523:116743.
[41] 张英会, 刘辉航, 王德成. 弹簧手册[M]. 北京:机械工业出版社, 2017. ZHANG Yinghui, LIU Huihang, WANG Decheng. Spring manual[M]. Beijing:China Machine Press, 2017.
[42] ZHAO Feng, CAO Shuqian, LUO Quantian, et al. Practical design of the QZS isolator with one pair of oblique bars by considering pre-compression and low-dynamic stiffness[J]. Nonlinear Dynamics, 2022, 108(4):3313-3330.
[43] CARRELLA A, BRENNAN M J, WATERS T P, et al. Force and displacement transmissibility of a nonlinear isolator with high-static-low-dynamic-stiffness[J]. International Journal of Mechanical Sciences, 2012, 55(1):22-29.
[44] ZHAO Feng, JI Jinchen, LUO Quantian, et al. An improved quasi-zero stiffness isolator with two pairs of oblique springs to increase isolation frequency band[J]. Nonlinear Dynamics, 2021, 104(1):349-365.
[45] 郝云堂, 金烨, 季辉. 虚拟样机技术及其在ADAMS中的实践[J]. 机械设计与制造, 2003(3):16-18. HAO Yuntang, JIN Ye, JI Hui, Virtual prototype technology and its practice on ADAMS[J]. Machinery Design & Manufacture, 2003(3):16-18