排液乳突与条纹相结合表面强化蒸汽冷凝传热

doi:10.3901/JME.2023.24.156

机械工程学报 ›› 2023, Vol. 59 ›› Issue (24): 156-163.doi: 10.3901/JME.2023.24.156

• 可再生能源与工程热物理 • 上一篇下一篇

扫码分享

排液乳突与条纹相结合表面强化蒸汽冷凝传热

尤天伢¹, 纪献兵^1,2, 郭浩¹, 甘园园¹, 苗政^1,2

1. 华北电力大学低品位能源多相流与传热北京市重点实验室北京 102206;
2. 华北电力大学电站能量传递转化与系统教育部重点实验室北京 102206

收稿日期:2023-05-08 修回日期:2023-11-05 出版日期:2023-12-20 发布日期:2024-03-05
通讯作者: 纪献兵(通信作者),男,1971年出生,博士,教授。主要研究方向为低品位能源利用及强化传热。E-mail:jxb@ncepu.edu.cn
作者简介:尤天伢,男,1996年出生。主要研究方向为传热传质多相流。E-mail:939531261@qq.com
基金资助:
国家自然科学基金(52176154，51776064)和中兴通讯有限公司产学研合作论坛资助项目

Enhancement of Steam Condensation Heat Transfer on the Mastoid-stripe Bilayer Surface

YOU Tianya¹, JI Xianbing^1,2, GUO Hao¹, GAN Yuanyuan¹, MIAO Zheng^1,2

1. Beijing Key Laboratory of Multiphase Flow and Heat Transfer for Low Grade Energy Utilization, North China Electric Power University, Beijing 102206;
2. Key Laboratory of Power Station Energy Transfer Conversion and System, Ministry of Education, North China Electric Power University, Beijing 102206

Received:2023-05-08 Revised:2023-11-05 Online:2023-12-20 Published:2024-03-05

摘要/Abstract

摘要： 为了强化蒸汽冷凝传热，基于协同排液思想，设计并制备一种乳突+条纹双层结构表面：一层为超亲水乳突表面，另一层为亲水-超疏水条纹表面。在纯蒸汽环境中进行了冷凝传热试验，结果表明，条纹表面对冷凝传热过程具有一定的强化能力，当过冷度为7.0 K时，条纹表面的冷凝传热系数为光滑铜表面的1.39倍。而增加排液乳突可获得更好的冷凝传热性能，相同工况下，冷凝传热系数可提高到光滑铜表面的2.14倍。利用高速摄影仪对不同表面上冷凝液滴的形成和运动过程进行了可视化研究，并进行了受力分析，研究发现，条纹表面和乳突表面均对液滴具有一定的驱动作用，在乳突+条纹表面的综合驱动作用下，超疏水区的冷凝液滴迅速脱离，极大地降低了冷凝热阻，强化了冷凝传热。

关键词: 协同排液, 表面张力, 冷凝传热, 双层表面, 润湿性

Abstract: To strengthen the heat transfer of pure steam condensation, based on the idea of cooperative drainage, a bilayer surface of mastoid + stripe is designed and prepared：one layer was a superhydrophilic mastoid surface, and the other is a hydrophilic-superhydrophobic stripe surface. Condensation heat transfer experiments are conducted in a pure steam environment. The results show that the striped surface strengthen the condensation heat transfer performance. As the subcooling degree is 7.0 K, the condensation heat transfer coefficient is 1.39 times that of a smooth copper surface. However, the mastoid + stripe bilayer surface has a better heat transfer performance, the condensation heat transfer coefficient can be increased to 2.14 times that of smooth copper surface under the same working conditions. To acquire the mechanism of enhancing condensation heat transfer performance, a series of visualization experiments and force analysis are carried out. It is found that the condensation droplets in the superhydrophobic area could be quickly separated by the driving force from the mastoid + streak surface. Therefore, the condensation heat resistance is greatly reduced and the corresponding condensation heat transfer is greatly enhanced.

Key words: synergistic drainage, interfacial tension, condensation heat transfer, bilayer surface, wettability

中图分类号:

TK124

尤天伢, 纪献兵, 郭浩, 甘园园, 苗政. 排液乳突与条纹相结合表面强化蒸汽冷凝传热[J]. 机械工程学报, 2023, 59(24): 156-163.

YOU Tianya, JI Xianbing, GUO Hao, GAN Yuanyuan, MIAO Zheng. Enhancement of Steam Condensation Heat Transfer on the Mastoid-stripe Bilayer Surface[J]. Journal of Mechanical Engineering, 2023, 59(24): 156-163.

参考文献

[1] 王永贵,张国俊,崔晓俊. RRU关键技术及创新[J]. 中兴通讯技术,2018,24(3):48-53. WANG Yonggui,ZHANG Guojun,CUI Xiaojun. Key technologies and innovations of RRU[J]. ZTE Technology Journal,2018,24(3):48-53.
[2] 顾秦铭,张朝阳,周晖,等. 激光-电化学沉积制备超疏水铜表面及其Cassie状态稳定性研究[J]. 机械工程学报,2020,56(1):223-232. GU Qinming,ZHANG Zhaoyang,ZHOU hui,et al. An investigation into preparation and Cassie state stability analysis of superhydrophobic copper surface produced by laser ablation and electrodeposition[J]. Journal of Mechanical Engineering,2020,56(1):223-232.
[3] 周冬冬,纪献兵,代超,等. 超亲水-疏水组合竖直表面强化蒸汽冷凝传热[J]. 机械工程学报,2018,54(10):182-187. ZHOU Dongdong,JI Xianbing,DAI Chao,et al. Steam condensation heat transfer enhancement on superhydrophilic-hydrophobic hybrid vertical surface[J]. Journal of Mechanical Engineering,2018,54(10):182-187.
[4] 顾秦铭,张朝阳,周晖,等. 激光-电化学沉积制备超疏水铜表面及其Cassie状态稳定性研究[J]. 机械工程学报,2020,56(1):223-232. GU Qinming,ZHANG Chaoyang,ZHOU Hui,et al. An investigation into preparation and cassie state stability analysis of superhydrophobic copper surface produced by laser ablation and electrodeposition[J]. Journal of Mechanical Engineering,2020,56(1):223-232.
[5] 王四芳,兰忠,王爱丽,等. 超疏水表面蒸汽及含不凝气蒸汽滴状冷凝传热实验分析[J]. 化工学报,2010,61(3):607-611. WANG Sifang,LAN Zhong,WANG Aili,et al. Dropwise condensation of steam and steam-air mixture on super-hydrophobic surfaces[J],Journal of Chemical Industry and Engineering(China),2010,61(3):607-611.
[6] MILJKOVIC N,ENRIGHT R,NAM Y,et al. Jumping-droplet-enhanced condensation on scalable superhydrophobic nanostructured surfaces[J]. Nano Letters,2013,13(1):179-187.
[7] JI D Y,LEE J W,KIM D,et al. Effective reduction of non-condensable gas effects on condensation heat transfer:Surface modification and steam jet injection[J]. Applied Thermal Engineering,2020,174:115264.
[8] 马学虎,刘旭,罗莎,等. 疏水-超疏水组合表面倾斜管外混合蒸气冷凝过程[J]. 工程热物理学报,2018,39(4):860-865. MA Xuehu,LIU Xu,LOU Sa,et al. Experimental investigation of mix-vapor condensation with hydrophobic-superhydrophobic hybrid surface on inclined tubes[J]. Journal of Engineering Thermophysics,2018,39(4):860-865.
[9] DERBY M M,CHATTERJEE A,PELES Y,et al. Flow condensation heat transfer enhancement in a mini-channel with hydrophobic and hydrophilic patterns[J]. International Journal of Heat & Mass Transfer,2014,68(1):151-160.
[10] PENG Benli,LAN Zhong,XU Wei,et al. Experimental investigation of dropwise condensation of steam on superhydrophobic-hydrophobic hybrid surface[J]. Journal of Engineering Thermophysics,2014,35(10):2036-2040.
[11] 崔晨乙,袁甲,齐宝金,等. 非均匀润湿表面强化冷凝换热研究[J]. 化学工程,2020,48(1):40-46. CUI Chenyi,YUAN Jia,QI Baojin,et al. Study on enhanced condensation heat transfer with non-uniform wetting surface[J]. Chemical Engineering(China),2020,48(1):40-46.
[12] 汪希奎,张友法,余新泉. 仿生非均匀润湿性表面研究进展及应用现状[J]. 表面技术,2020,49(12):93-115. WANG Xikui,ZHANG Youfa,YU Xinquan. Research progress and application status of biomimetic hybrid wetting surfaces[J]. Surface Technology,2020,49(12):93-115.
[13] MAA J R. Drop size distribution and heat flux of dropwise condensation[J]. Chemical Engineering Journal,1978,16(3):171-176.
[14] 袁金斗,王彦博,胡涵,等. 微小通道内不同润湿性表面流动冷凝传热[J]. 化工学报,2018,69(10):4156-4166,4496. YUAN Jindou,WANG Yanbo,HU Han,et al. Flow condensation heat transfer on surfaces with different wettability in mini-channel[J]. Journal of Chemical Industry and Engineering(China),2018,69(10):4156-4166,4496.
[15] BAHADUR V,GARIMELLA S V. An energy-based model for electrowetting-induced droplet actuation[J]. Journal of Micromechanics and Microengineering,2006,16(8):1494-1503.
[16] BRINKMANN M,LIPOWSKY R. Wetting morphologies on substrates with striped surface domains[J]. Journal of Applied Physics,2002,92(8):4296-4306.
[17] 李光昱. 微重力条件下多孔介质中的液体输运特性研究[D]. 长沙:国防科学技术大学,2016. LI Guangyu. Research on transport properties of liquid in porous media under microgravity[D]. Changsha:National University of Defense Technology,2016.
[18] HU H W,TANG G H,NIU D. Experimental investigation of condensation heat transfer on hybrid wettability finned tube with large amount of noncondensable gas[J]. International Journal of Heat and Mass Transfer,2015,85:513-523.
[19] EISFELD B,SCHNITZLEIN K. The influence of confining walls on the pressure drop in packed beds[J]. Chemical Engineering Science,2001,56(14):4321.

排液乳突与条纹相结合表面强化蒸汽冷凝传热

Enhancement of Steam Condensation Heat Transfer on the Mastoid-stripe Bilayer Surface

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	王彬开, 常博, 张衡. 基于毛细力的芯片微操作方法研究[J]. 机械工程学报, 2023, 59(6): 285-294,308.
[2]	毛雅梅, 黑鸿君, 高洁, 郑可, 于盛旺, 王垚. 钎焊金刚石研究进展及其工具的应用[J]. 机械工程学报, 2022, 58(4): 80-93.
[3]	王志远, 邢志国, 王海斗, 单徳彬. 液滴在固体织构化表面上的润湿行为研究现状[J]. 机械工程学报, 2022, 58(1): 124-144.
[4]	郭浩, 纪献兵, 徐进良. 颗粒形貌及表面润湿性对毛细芯及环路热管性能的影响[J]. 机械工程学报, 2020, 56(14): 173-179.
[5]	焦云龙, 叶家鑫, 刘小君, 刘焜. 表面润湿性对橡胶滑动接触界面摩擦特性的影响[J]. 机械工程学报, 2019, 55(1): 106-111.
[6]	吕涛, 黄水泉, 胡晓冬, 冯伯华, 许雪峰. 静电微量润滑气雾特性及其切削加工性能研究[J]. 机械工程学报, 2019, 55(1): 129-138.
[7]	周冬冬, 纪献兵, 代超, 徐进良. 超亲水-疏水组合竖直表面强化蒸汽冷凝传热[J]. 机械工程学报, 2018, 54(10): 182-187.
[8]	李小磊, 张磊, 马晓雯, 张会臣. 基于微肋板伸缩疏水/超疏水表面设计及其润湿性调控^*[J]. 机械工程学报, 2017, 53(5): 167-174.
[9]	陈平, 李俊玲, 邵天敏, 项欣, 刘光磊. 考虑表面张力影响的表面织构最优参数分析^*[J]. 机械工程学报, 2016, 52(19): 123-131.
[10]	李英民, 王天舒, 刘伟华, 任玉艳. 改性水溶性高分子粘结剂的制备及性能的研究^*[J]. 机械工程学报, 2016, 52(14): 67-72.
[11]	龚艳丽;邓朝晖;伍俏平万林林. 新型金刚石纤维的制备及其切削性能[J]. , 2014, 50(9): 185-192.
[12]	庞桂兵;李殿明;齐学智;徐文骥;温春盛;赵秀君;杨林. 电化学蚀除法调控1Cr18Ni9Ti表面润湿性的研究[J]. , 2012, 48(21): 105-109.
[13]	李大勇;石德全;张宇彤;王利华. 液态合金表面张力快速检测新方法及在铸造工程中的应用[J]. , 2008, 44(10): 250-254.
[14]	杨春利;牛尾诚夫;田中学. TIG焊熔池表面张力的测定及表面活性剂的影响[J]. , 2000, 36(10): 59-63.
[15]	任露泉;邱小明;徐德生;李建桥. Cu基钎料在白口铸铁表面的润湿性及界面反应[J]. , 1998, 34(3): 96-100.