[1] XING Y,HAN P,WANG S,et al. A review of concentrator silicon solar cells[J]. Renewable & Sustainable Energy Reviews,2015,51:1697-1708.
[2] ZHAO L,MAYNADIER A,NELIAS D. Stiffness and fracture analysis of photovoltaic grade silicon plates[J]. International Journal of Solids & Structures,2016,s 97-98:355-369.
[3] 常伟杰,陈远龙,张建华,等. 电火花加工单脉冲放电通道直径扩展规律研究[J]. 机械工程学报,2016,52(9):208-212. CHANG Weijie,CHEN Yuanlong,ZHANG Janhua,et al Single pulse discharge channel expansion laws of EDM[J]. Journal of Mechanical Engineering,2016,52(9):208-212.
[4] HO K H,NEWMAN S T,RAHIMIFARD S,et al. State of the art in wire electrical discharge machining (WEDM)[J]. International Journal of Machine Tools & Manufacture,2004,44(12-13):1247-1259.
[5] JARIN S,SALEH T,RANA M,et al. An experimental investigation on the effect of nanopowder for micro-wire electro discharge machining of gold coated silicon[J]. Procedia Engineering,2017,184:171-177.
[6] TAKINO H,ICHINOHE T,TANIMOTO K,et al. Contouring of polished single-crystal silicon plates by wire electrical discharge machining[J]. Precision Engineering,2007,31(4):358-363.
[7] TAKINO H,ICHINOHE T,TANIMOTO K,et al. Cutting of polished single-crystal silicon by wire electrical discharge machining[J]. Precision Engineering,2004,28(3):314-319.
[8] 高连,刘志东,邱明波,等. 电火花线切割单晶硅变质层与裂纹分析[J]. 中国机械工程,2011(9):1090-1095. GAO Lian,LIU Zhidong,QIU Mingbo,et al. Analysis on deterioration layer and cracks of monocrystalline silicon cut by WEDM[J]. China Mechanical Engineering,2011(9):1090-1095.
[9] SNOEYS R,DAUW D,KRUTH J P. Improved adaptive control system for EDM processes[J]. CIRP Annals-Manufacturing Technology,1980,29(1):97-101.
[10] SNOEYS R,DAUW D,JENNES M. Survey of EDM adaptive control and detection systems[J]. CIRP Annals-Manufacturing Technology,1982,31(2):483-489.
[11] SNOEYS R,DAUW D,KRUTH J P. Survey of adaptive control in electro discharge machining[J]. Journal of Manufacturing Systems,1983,2(2):147-164.
[12] RAJURKAR K P,WANG W M,LINDSAY R P. A new model reference adaptive control of EDM[J]. CIRP Annals-Manufacturing Technology,1989,38(1):183-186.
[13] HAN F,WACHI S,KUNIEDA M. Improvement of machining characteristics of micro-EDM using transistor type isopulse generator and servo feed control[J]. Precision Engineering,2004,28(4):378-385.
[14] RAJURKAR K P,WANG W M,LINDSAY R P. real-time stochastic model and control of EDM[J]. CIRP Annals-Manufacturing Technology,1990,39(1):187-190.
[15] RAJURKAR K,WANG W. Improvement of EDM performance with advanced monitoring and control systems[J]. Journal of Manufacturing Science and Engineering,1997,119(4B):770-775.
[16] GARBAJS V,PEKLENIK J. Statistical model for an adaptive control of EDM-process[J]. CIRP Annals-Manufacturing Technology,1985,34(1):499-502.
[17] WECK M,DEHMER J. Analysis and adaptive control of EDM sinking process using the ignition delay time and fall time as parameter[J]. CIRP Annals-Manufacturing Technology,1992,41(1):243-246.
[18] 韦国强,刘志东,邱明波,等. 半导体材料放电切割弯丝过冲控制研究[J]. 电加工与模具,2012(2):9-12. WEI Guo,LIU Zhidong,QIU Mingbo,et al. Research on control of the bent wire electrode in the WEDM of semiconductor[J]. Electromachining & Mould,2012(2):9-12.
[19] LIU Zhidong,CHEN Haoran,PAN Huijun,et al. Automatic control of WEDM servo for silicon processing using current pulse probability detection[J]. The International Journal of Advanced Manufacturing Technology,2014,76(1-4):367-374.
[20] 庞中华,崔红. 系统辨识与自适应控制MATLAB仿真[M]. 北京:北京航空航天大学出版社,2013. PANG Zhonghua,CUI Hong. System identification and adaptive control MATLAB simulation[M]. Beijing:Beijing University of Aeronautics and Astronautics Press,2013. |