[1] 周森,郭永彩,高潮. 基于激光扫描的大尺寸圆锥体几何测量系统[J]. 中国激光,2014,41(5):217-226. ZHOU Sen,GUO Yongcai,GAO Chao. Development of a laser-based geometric measurement system for large-scale conical[J]. Chinese Journal of Lasers,2014,41(5):217-226.
[2] 彭祎帆,陶毅阳,于超. 基于红外结构光的三维显示用交互装置[J]. 光学学报,2013,33(4):116-122. PENG Yifan,TAO Yiyang,YU Chao. Three-dimenaional display interaction device based on infrared structured light[J]. Acta Optica Sinica,2013,33(4):116-122.
[3] 徐科,周鹏,杨朝霖. 基于光度立体学的金属板带表面微小缺陷在线检测方法[J].机械工程学报,2013,49(4):25-29. XU Ke,ZHOU Peng,YANG Chaolin. On-line detection technique of tiny surface defects for metal plates and strips based on photometric stereo[J]. Journal of Mechanical Engineering,2013,49(4):25-29.
[4] QI Lizhe,GAN Zhongxue,YUN Chao,et al. A novel method for aero engine blade removed-material measurement based on the robotic 3D scanning system[C]//2010 International Conference on Computer,Mechatronics,Control and Electronic Engineering, 2010:72-75.
[5] 齐立哲,汤青,贠超,等. 机器人三维激光扫描视觉系统标定误差[J]. 机械工程学报,2011,47(13):9-15. QI Lizhe,TANG Qing,YUN Chao,et al. Calibration error of robotic vision system of 3D laser scanner[J]. Journal of Mechanical Engineering,2011,47(13):9-15.
[6] 齐立哲,甘中学,贠超,等. 机器人砂带磨削系统作业精度分析与误差补偿[J]. 机器人,2010,32(6):787-791. QI Lizhe,GAN Zhongxue,YUN Chao,et al. Working accuracy analysis and error compensation for robotic belt grinding system[J]. Robot,2010,32(6):787-791.
[7] AXELROD B,HUANG W H. Improving hand-eye calibration for robotic grasping and manipulation[C]//2012 IEEE Conference on Technologies for Practical Robot Applications,2012:121-126.
[8] SHAH M. Solving the robot-world/hand-eye calibration problem using the kronecker product[J]. Journal of Mechanisms & Robotics,2013,5(3):031007.
[9] WAGNER M,HEB P,REITELSHÖFER S. Self-calibration method for a robotic based 3D scanning system[C]//IEEE International Conference on Emerging Technologies and Factory Automation,2015:1-6.
[10] 任永杰,尹仕斌,邾继贵. 机器人激光扫描系统现场标定技术[J]. 光电子·光,2014,25(12):2336-2342. REN Yongjie,YIN Shibin,ZHU Jigui. Calibration technology for robotic laser scanning system[J].Journal of Optoelectronics·Laser,2014,25(12):2336-2342.
[11] YIN Shibin,REN Yongjie,GUO Yin. Development and calibration of an integrated 3D scanning system for high-accuracy large-scale metrology[J]. Measurement:Journal of the International Measurement Confederation,2014,54:65-76.
[12] 许海霞,王耀南,万琴. 一种机器人手眼关系自标定方法[J]. 机器人,2008,30(4):373-378. XU Haixia,WANG Yaonan,WAN Qin. A self-calibration approach to hand-eye relation of robot[J]. Robot,2008,30(4):373-378.
[13] 洪磊,嵇保健,王玉国. 改进的单特征点机器人手眼自标定方法[J]. 北京邮电大学报,2016,39(1):96-101. HONG Lei,JI Baojian,WANG Yuguo. Improved self-calibration method to hand-eye relation of robot based on a single feature point[J]. Journal of Beijing University of Posts and Telecommunications,2016,39(1):96-101.
[14] 胡小平,左富勇,谢珂. 微装配机器人手眼标定方法研究[J]. 仪器仪表学报,2012,33(7):1521-1526. HU Xiaoping,ZUO Fuyong,XIE Ke. Research on hand-eye calibration method for micro-assembly robot[J]. Chinese Journal of Scientific Instrument,2012,33(7):1521-1526.
[15] ARUN K S,HUANG T S,BLOSTEIN S D. Least-squares fitting of two 3-D point sets[J]. Pattern Analysis and Machine Intelligence,IEEE Transactions on,1987,9(5):698-700. |