一种基于变形运动矢量分析法的转子耦合故障机理建模

doi:10.3901/JME.2021.15.091

摘要/Abstract

摘要： 为完善和丰富目前旋转机械耦合故障所普遍采用的数值解法，提出一种松动—碰摩转子耦合故障的建模方法：变形运动矢量分析法。首先，“变形运动”以故障定义变形，然后利用傅里叶级数建立起故障变形和周期信号的关系；其次，“矢量分析”利用动、静两套坐标系建立起故障变形运动和周期性激励力的关系，并在动坐标系中分析故障运动；第三，利用谐波平衡求出解析解。变形运动分析法是一种全新的解析解法，该解法能够对旋转机械耦合故障的发展走向做出理论并整体的把握，在求解过程中能够从机理上解析耦合故障如何一层一层的被展开和发展，以及故障的结构性存在。假如对解析解做更深入的推理分析，可以对数值解法作为现象提出的混沌、分岔等故障特征得到机理层面的解释，而在故障诊断实践中一直难以解释的分数倍频、和差频率等成分，其实质也只是解析解中的一部分。最后，采用工程实践的方法验证了建模方法的有效和解析解结论的正确。

关键词: 故障变形节点假设, 松动—碰摩耦合故障, 动、静坐标系, 变形运动矢量分析法

Abstract: In view of the special limitation of the numerical method commonly used in the coupling fault of rotating machinery, in order to explain the fault mechanism more deeply and widely, a modeling method of a rotor coupling fault mechanism modeling based on the deformation-motion vector analysis method is proposed. Firstly, "deformation movement" defines deformation by fault, and establishes the relationship between fault deformation and periodic signal by Fourier series; secondly, "vector analysis" analyzes fault movement in dynamic coordinate system, and establishes the relationship between fault deformation motion and periodic excitation force by using dynamic and static coordinate systems; thirdly, analytic solution is obtained by harmonic balance. The deformation motion vector analysis method is a new method of solving the analytic solution, which can make a theoretical and overall grasp of the development trend of the coupling fault of rotating machinery, it can explain mechanically how the coupling fault unfolded layer by layer and the fault structure. If the analytic solution is further rational analysis, the fault characteristics of chaos and bifurcation proposed by numerical solution as a phenomenon can be explained at the mechanism level. The fractional frequency multiplication and sum difference frequency which are difficult to explain in fault diagnosis practice are also part of the solution. Finally, the effectiveness of the modeling method and the correctness of the analytic solution are verified by engineering practice.

Key words: failure deformation node assumption, loose-rubbing coupling fault, dynamic and static coordinate systems, deformation motion vector analysis method

中图分类号:

TG156

胡军, 杨德斌. 一种基于变形运动矢量分析法的转子耦合故障机理建模[J]. 机械工程学报, 2021, 57(15): 91-104.

HU Jun, YANG Debin. A Rotor Coupling Fault Mechanism Modeling Based on the Deformation Motion Vector Analysis Method[J]. Journal of Mechanical Engineering, 2021, 57(15): 91-104.

导出引用管理器 EndNote|Reference Manager|ProCite|BibTeX|RefWorks

链接本文: http://www.cjmenet.com.cn/CN/10.3901/JME.2021.15.091

http://www.cjmenet.com.cn/CN/Y2021/V57/I15/91

参考文献

[1] 孙卫祥, 陈进, 伍星, 等. 基于信息融合的支撑座早期松动故障诊断[J]. 上海交通大学学报, 2006, 40(2):239-242. SUN Weixiang, CHEN Jin, WU Xing, et al. Early loosening fault diagnosis of clamping support based on information fusion[J]. Journal of Shanghai Jiaotong University, 2006, 40(2):239-242.
[2] 马辉, 赵群超, 宋雪萍, 等. 基于重分配小波尺度图的转子系统支座松动故障的研究[J]. 中国机械工程, 2007, 18(8):962-966. MA Hui, ZHAO Qunchao, SONG Xueping, et al. Study on pedestal looseness faults of a rotor system based on reassigned wavelet scalograms[J]. China Mechanical Engineering, 2007, 18(8):962-966.
[3] 董广明, 陈进, 雷宣扬, 等. 导弹支撑座连接螺栓松动故障诊断的实验研究[J]. 振动、测试与诊断, 2005, 25(3):174-178. DONG Guangming, CHEN Jin, LEI Xuanyang, et al. Study on diagnosing attachment bolt looseness in missile clamping support[J]. Journal of Vibration, Measurement & Diagnosis, 2005, 25(3):174-178.
[4] CHU F, TANG Y. Stability and non-linear responses of a rotor-bearing system with pedestal looseness[J]. Journal of Sound and Vibration, 2001, 241(5):879-893.
[5] 刘元峰, 赵玫, 朱厚军. 转子有碰摩和支承松动故障时的混沌特性研究[J]. 振动与冲击, 2002, 21(4):36-38. LIU Yuanfeng, ZHAO Mei, ZHU Houjun. Chaotic behavior of a rotor under rub and looseness[J]. Journal of Vibration and Shock, 2002, 21(4):36-38.
[6] 刘挺, 冯霏, 赵增晖, 等. 松动条件下刚度慢变转子的研究[J]. 中国工程机械学报, 2011, 9(2):229-232. LIU Ting, FENG Fei, ZHAO Zenghui, et al. Rotors with slowly-variable stiffness under looseness condition[J]. Chinese Journal of Construction Machinery, 2011, 9(2):229-232.
[7] 曹青松, 向琴, 熊国良. 机械松动现象与故障特性研究综述[J]. 噪声与振动控制, 2015, 35(2):1-6. CAO Qingong, XIANG Qin, XIONG Guoliang. Review of mechanical looseness phenomena and failure characteristics study[J]. Noise and Vibration Control, 2015, 35(2):1-6.
[8] VILLA C, SINOU J J, THOUVEREZ F. Stability and vibration analysis of a complex flexible rotor bearing system[J]. Communications in Nonlinear Science and Numerical Simulation, 2008, 13(4):804-821.
[9] 刘献栋, 何田, 李其汉. 支承松动的转子系统动力学模型及其故障诊断方法[J]. 航空动力学报, 2005, 20(1):54-59. LIU Xiandong, HE Tian, LI Qihan. Dynamic model of rotor system with support loosening and its diagnosis method[J]. Journal of Aerospace Power, 2005, 20(1):54-59.
[10] 陈果.滚动轴承支承下的不平衡转子系统非线性动力响应分析[J].中国机械工程, 2007, 20(4):362-367. CHEN Guo. Nonlinear dynamic response analysis of unbalanced rotor system under the rolling bearing support[J].China Mechanical Engineering, 2007, 20(4):362-367.
[11] 沈长青, 汤盛浩, 江星星, 等. 独立自适应学习率优化深度信念网络在轴承故障诊断中的应用研究[J]. 机械工程学报, 2019, 55(7):81-88.SHEN Changqing, TANG Shenghao, JIANG Xingxing, et al.Bearings fault diagnosis based on improved deep belief network by self-individual adaptive learning rate[J]. Journal of Mechanical Engineering, 2019, 55(7):81-88.
[12] 王奉涛, 刘晓飞, 敦泊森, 等. 基于萤火虫优化的核自动编码器在中介轴承故障诊断中的应用[J]. 机械工程学报, 2019, 55(7):58-64.WANG Fengtao, LIU Xiaofei, DUN Bosen, et al.Application of kernel auto-encoder based on firefly optimization in intershaft bearing fault diagnosis[J]. Journal of Mechanical Engineering, 2019, 55(7):58-64.
[13] 张靖, 闻邦椿. 两端支座松动转子系统的频率特性分析[J]. 中国机械工程, 2008, 19(1):68-71. ZHANG Jing, WEN Bangchun. A study of frequency characteristics of rotor system with pedestal looseness at two supports[J]. China Mechanical Engineering, 2008, 19(1):68-71.
[14] 马辉, 孙伟, 任朝晖, 等. 多盘悬臂转子系统支座松动故障研究[J]. 航空动力学报, 2009, 24(7):1512-1517. MA Hui, SUN Wei, REN Zhaohui, et al. Research on pedestal looseness fault of multi-discover-hung rotor system[J]. Journal of Aerospace Power, 2009, 24(7):1512-1517.
[15] 罗跃纲, 闻邦椿. 双跨松动转子-轴承系统周期运动稳定性[J]. 振动与冲击, 2007, 26(8):9-12. LUO Yuegang, WEN Bangchun. Stability of two-span rotor-bearing system with pedestal looseness fault[J]. Journal of Vibration and Shock, 2007, 26(8):9-12.
[16] 罗跃纲, 张松鹤, 闻邦椿. 双跨松动-碰摩转子-轴承系统周期运动稳定性[J]. 机械强度, 2010, 32(6):894-898. LUO Yuegang, ZHANG Songhe, WEN Bangchun. Stability of two-span rotor-bearing system with coupling faults of pedestal looseness and rub-impact[J]. Journal of Mechanical Strength, 2010, 32(6):894-898.
[17] 卢艳军, 任朝晖, 陈宏, 等. 双盘悬臂转子轴承系统松动碰摩耦合故障分析[J]. 振动、测试与诊断, 2007, 27(2):102-107. LU Yanjun, REN Zhaohui, CHEN Hong, et al. Analysis of rubbing fault in a dual-disc over-hung rotor-bearing system[J]. Journal of Vibration, Measurement & Diagnosis, 2007, 27(2):102-107.
[18] 刘杨, 太兴宇, 马辉, 等. 双盘三支撑转子轴承系统松动-碰摩耦合故障分析[J]. 航空动力学报, 2013, 28(5):977-982. LIU Yang, TAI Xingyu, MA Hui, et al. Looseness-rubbing Coupling fault of dual-disk three-support rotor-bearing system.[J]. Journal of Aerospace Power, 2013, 28(5):977-982.
[19] 李振平, 闻邦椿, 张金换, 等. 松动-裂纹耦合故障转子系统的非线性动力学行为研究[J]. 中国机械工程, 2003, 14(22):1891-1895. LI Zhenping, WEN Bangchun, ZHANG Jinhuan, et al. Nonlinear dynamics of a rotor-bearing system with coupling faults of pedestal looseness and crack[J]. China Mechanical Engineering, 2003, 14(22):1891-1895.
[20] 刘长利, 郑建荣, 周炜, 等. 松动裂纹转子轴承系统周期运动分岔及稳定性分析[J]. 振动与冲击, 2007, 26(11):13-15. LIU Changli, ZHENG Jianrong, ZHOU Wei, et al. On the stability of periodic motion of a rotor-bearing system with a crack[J]. Journal of Vibration and Shock, 2007, 26(11):13-15.
[21] 陈果. 具有不平衡-碰摩耦合故障的转子-滚动轴承系统非线性动力学研究[J]. 振动与冲击, 2008, 4(27):43-48. CHEN Guo. Nonlinear dynamic study on a rotor-ball bearing system with unbalance-rubbing coupling fault[J]. Journal of Vibration and Shock, 2008, 44(27):43-48.
[22] MA H, ZHAO X, TENG Y, et al. Analysis of dynamic characteristics for a rotor system with pedestal looseness[J]. Shock and Vibration, 2011, 18(1-2):13-27.
[23] XIONG G L, XIANG Q, CAO Q S. Bearing looseness fault characteristics analysis of rotor system based on incremental harmonic balance method[C]//Applied Mechanics and Materials. Trans. Tech. Publications, 2013, 397:517-523.
[24] 李志农, 李云龙, 刁海洋. 基于非线性输出频率响应函数的转子不对中-碰摩耦合故障诊断方法研究[J].机械工程学报, 2019, 55(19):84-91.LI Zhinong, LI Yunlong, DIAO Haiyang. Research on diagnosis method of rotor misalignment-bumping coupling fault based on nonlinear output frequency response function[J]. Journal of Mechanical Engineering, 2019, 55(19):84-91.
[25] 路振勇, 侯磊, 侯升亮, 等. 含裂纹故障的航空发动机转子系统动力学特性分析[J]. 振动与冲击, 2018, 37(3):40-46.LU Zhenyong, HOU Lei, HOU Shengliang, et al.Dynamic characteristics of an aeroengine rotor system with crack faults[J]. Journal of Vibration and Shock, 2018, 37(3):40-46.
[26] 徐梅鹏, 侯磊, 李洪亮, 等. 外转子支点不同心的双转子系统振动特性[J]. 振动与冲击, 2019, 38(4):1-6.XU Meipeng, HOU Lei, LI Hongliang, et al. Dynamic characteristics of a dual-rotor system with outer-rotor misalignment[J]. Journal of Vibration and Shock, 2019, 38(4):1-6.
[27] 阳刚, 周标, 臧朝平. 含接触界面的叶盘结构强迫振动响应快速预测方法[J]. 航空动力学报, 2019, 34(9):1953-1961.YANG Gang, ZHOU Biao, ZANG Chaoping. Fast response prediction method for bladed disks with contact interfaces[J]. Journal of Aerospace Power, 2019, 34(9):1953-1961.
[28] 姚红良, 韩清凯, 李凌轩, 等. 基于谐波分量的转子系统碰摩故障定量诊断方法[J]. 机械工程学报, 2012, 48(5):43-48.YAO Hongliang, HAN Qingkai, LI Lingxuan, et al.Method for detecting rubbing fault in rotor system based on harmonic components[J]. Journal of Mechanical Engineering, 2012, 48(5):43-48.
[29] 姚红良, 李鹤, 李小彭, 等. 旋转机械局部故障力的模型诊断及瞬时故障力识别[J]. 机械工程学报, 2007, 43(1):120-124.YAO Hongliang, LI He, LI Xiaopeng, et al. Diagnosis of local fault and identification of transient fault force in rotating machinery[J]. Journal of Mechanical Engineering, 2007, 43(1):120-124.
[30] 马辉, 太兴宇, 李焕军, 等.旋转叶片-机匣碰摩模型及试验研究综述[J].航空动力学报, 2013, 28(9):2055-2069.MA Hui, TAI Xingyu, LI Huanjun, et al. Literature survey of rub-impact model and experiment of rotating blade andcasing[J]. Journal of Aerospace Power, 2013, 28(9):2055-2069.
[31] 陈松霆, 吴志强.反向旋转双转子碰摩振动分析[J].振动与冲击, 2012, 31(23):142-147.CHEN Songting, WU Zhiqiang. Rubbing vibration analysis for a counter-rotating dual-rotor system[J]. Journal of Vibration and Shock, 2012, 31(23):142-147.
[32] 戴兴建, 董金平, 张小章.不平衡量对转子碰摩振动的影响[J]. 机械工程学报, 2001, 37(6):90-93.DAI Xingjian, DONG Jinping, ZHANG Xiaozhang. Effects of unbalance on the rotor/stop rubbing[J]. Journal of Mechanical Engineering, 2001, 37(6):90-93.
[33] 文才山, 陈滨, 王玉玲. 考虑摩擦作用的多柔体系统点-面碰撞模型[J].中国机械工程, 2000, 1l(6):616-620.WEN Caishan, CHEN Bin, WANG Yuling.The point-surface impact model considering the friction effect in flexible multi-body systemt[J].China Mechanical Engineering, 2000, 11(6):616-620.
[34] 侯磊, 陈予恕. 非线性共振及其计算和应用[J]. 机械工程学报, 2019, 55(13):1-12.HOU Lei, CHEN Yushu. Nonlinear resonance and its calculations and applications[J]. Journal of Mechanical Engineering, 2019, 55(13):1-12.