[1] 陈国定,陈晓南.机械设计基础[M].北京:机械工业出版社, 2005. CHEN Guoding, CHEN Xiaonan. The basis of mechanical designing[M]. Beijing:China Machine Press, 2005. [2] CHILDS P R N. Mechanical design[M]. Oxford:Elsevier Butterworth-Heinemann, 2004. [3] 赵升吨,李泳峄,范淑琴,等.汽车花键轴零件的生产工艺综述[J].锻压装备与制造技术, 2012(3):74-77. ZHAO Shengdun, LI Yongyi, FAN Shuqin, et al. Overview about production process of spline shaft part for automobile[J]. China Metalforming Equipment & Manufacturing Technology, 2012(3):74-77. [4] ZHANG D W, LI Y T, FU J H. Tooth curves and entire contact area in process of spline cold rolling[J]. Chinese Journal of Mechanical Engineering, 2008, 21(6):94-97. [5] ZHANG D W, ZHAO S D. New method for forming shaft having thread and spline by rolling with round dies[J]. The International Journal of Advanced Manufacturing Technology, 2014, 70:1455-1462. [6] LI Y Y, ZHAO S D, FAN S Q, et al. Study on the material characteristic and process parameters of the open-die warm extrusion process of spline shaft with 42CrMo steel[J]. Journal of Alloy and Compounds, 2013, 571:12-20. [7] ZHANG D W, LI Y T, FU J H. Mechanics analysis on precise forming process of external spline cold rolling[J]. Chinese Journal of Mechanical Engineering, 2007, 20(3):54-58. [8] 张大伟,李永堂,付建华,等.外花键冷滚压成形坯料直径计算[J].锻压装备与制造技术, 2007, 42(2):56-59. ZHANG Dawei, LI Yongtang, FU Jianhua, et al. The blank diameter calculation of cold rolling forming process[J]. China Metalforming Equipment & Manufacturing Technology, 2007, 42(2):56-59. [9] 崔敏超,赵升吨,陈超,等.渐开线花键参数化造型及滚轧坯料直径算法研究[J].锻压装备与制造技术, 2016, 50(1):107-110. CUI Minchao, ZHAO Shengdun, CHEN Chao, et al. Study on parametric modeling of involute spline and the algorithm of rolling billet diameter[J]. China Metalforming Equipment & Manufacturing Technology, 2016, 50(1):107-110. [10] 李泳峄,赵升吨,赵永强,等.系统参数对花键轴轴向推进滚轧成形工艺过程的影响分析及试验[J].机械工程学报, 2014, 50(22):50-56. LI Yongyi, ZHAO Shengdun, ZHAO Yongqiang, et al. Analysis and experiment on the effect of system parameters on the axial-infeed rolling forming process of spline shaft[J]. Journal of Mechanical Engineering, 2014, 50(22):50-56. [11] ZHANG D W, LI Y T, FU J H, et al. Rolling force and rolling moment in spline cold rolling using slip-line field method[J]. Chinese Journal of Mechanical Engineering, 2009, 22(5):688-695. [12] WANG Z K, ZHANG Q. Numerical simulation of involutes spline shaft in cold rolling forming[J]. Journal of Central South University of Technology, 2008, (S2):278-283. |