超声波冲击与TIG熔修复合强化改善高强钢焊接接头的疲劳性能

摘要/Abstract

摘要： 研究表明超声波冲击方法与TIG熔修方法在提高焊接接头疲劳性能机理方面存在着很强的互补性。提出一种对接头焊趾先进行一遍TIG熔修处理，然后再实施超声波冲击的复合处理新方法用来改善焊接接头的疲劳性能。对比疲劳试验结果显示：①在一定的应力范围内，超声波冲击处理试件与原始焊态试件相比，疲劳强度提高95%左右，疲劳寿命延长3.6~62倍。②TIG熔修试件与原始焊态试件相比，疲劳强度的改善程度高达34%左右；在较高应力范围内，疲劳寿命没有提高；在低应力范围内，延长疲劳寿命约为0.4~1.3倍。③超声波冲击+TIG熔修复合强化试件与原始焊态试件相比，疲劳强度提高120%左右，疲劳寿命延长28~125倍。④TIG熔修+超声波冲击复合处理能够在TIG熔修和超声波冲击处理的基础上，进一步改善焊接接头的疲劳性能；与单纯的超声波冲击相比，在高应力区域内，TIG熔修+超声波冲击复合处理一定程度上克服了单纯的超声波冲击对所处理的焊接接头疲劳性能改善程度大幅度降低的缺点。

关键词: TIG熔修, 超声波冲击, 超声波冲击+TIG熔修复合处理, 疲劳性能

Abstract: Studies show that considering the mechanism of improving the fatigue performance, ultrasonic peening and TIG dressing are complementary. A new compound treating method of improving fatigue performance of high-strength welded joint is that firstly treated the welded toe by TIG-dressing and then performed ultrasonic peening. Test results indicated that：(1) In the given range of stress level, contrasted with the specimens in as welded condition the fatigue strength of the specimens treated by ultrasonic peening is increased by about 95% and the fatigue life is prolonged by 3.6～62 times. The fatigue strength of the specimens treated by TIG-dressing is increased by about 34% and the fatigue life is prolonged by 0.4～1.3 times. And while the fatigue strength of the speci-mens treated by compound treating by TIG-dressing adding ultrasonic peening is increased by about 120% and the fatigue life is prolonged by 28～125 times. (2) The fatigue strength can be even improved by compound treating ultrasonic peen-ing adding TIG dressing on the basis of ultrasonic peening or TIG dressing. In the range of high stress, contrasted with simple ultrasonic peening treating TIG dressing adding ultra-sonic peening compound treating has definitive predominance because compound treating overcome the decreasing of fa-tigue performance improvement of welded joint treated by simple ultrasonic peening.

Key words: adding TIG dressing, Compound treating by ultrasonic peening, Fatigue performance, TIG dressing, Ultrasonic peening

中图分类号:

TP12

王东坡;霍立兴;张玉凤;荆洪阳;杨新岐. 超声波冲击与TIG熔修复合强化改善高强钢焊接接头的疲劳性能[J]. , 2003, 39(5): 55-59.

Wang Dongpo;Huo Lixing;Zhang Yufeng;Jing Hongyang;Yang Xinqi. IMPROVING FATIGUE BEHAVIOR OF THE HIGH-STRENGTH WELDED JOINTS COMPOUND TREATED BY TIG DRESSING AND ULTRASONIC PEENING[J]. , 2003, 39(5): 55-59.

[1]	吴吉展, 魏沛堂, 吴少杰, 刘怀举, 朱才朝. 航空齿轮钢滚动接触疲劳性能预测与表面完整性优化[J]. 机械工程学报, 2024, 60(8): 81-93.
[2]	赵德望, 姜超, 赵延广, 杨文平, 樊俊铃. 铝锂合金疲劳性能及预测研究-基于试验和“浅层”+“深度”混合神经网络方法[J]. 机械工程学报, 2024, 60(16): 190-199.
[3]	张吉银, 姚倡锋, 谭靓, 崔敏超, 周征, 孙蕴齐, 李国喜, 樊怡. 喷丸强化残余应力对疲劳性能和变形控制影响研究进展[J]. 机械工程学报, 2023, 59(6): 46-60.
[4]	冯晓慧, 高飞, 赵阳, 关雪飞, 何晶靖, 林京. 电弧增材再制造低碳钢疲劳性能研究[J]. 机械工程学报, 2023, 59(14): 151-158,168.
[5]	高杰维, 余明华, 朱顺鹏, 廖鼎, 李亚波, 韩靖. 高速列车S38C车轴外物致损模拟与疲劳性能研究[J]. 机械工程学报, 2022, 58(24): 178-187.
[6]	李冬晓, 杨纯, 黄鑫, 邢广强, 杨新岐. 静轴肩FSW铝合金6061-T4板的T形接头组织特征及动静载特性研究[J]. 机械工程学报, 2021, 57(20): 108-116.
[7]	魏文杰, 何晓聪, 张先炼, 卢嘉伟. DP780/AA6061薄板自冲铆接头微动损伤特性[J]. 机械工程学报, 2020, 56(6): 169-175.
[8]	樊俊铃. 基于能量耗散的Q235钢高周疲劳性能评估[J]. 机械工程学报, 2018, 54(6): 1-9.
[9]	张越, 何晓聪, 李智, 张义和. 铝合金压印接头微动疲劳机理研究[J]. 机械工程学报, 2018, 54(19): 190-196.
[10]	赵德望, 任大鑫, 赵坤民, 郭杏林, 杨文平. 工艺参数对镁钛异质金属超声波点焊接头拉伸性能及疲劳性能的影响[J]. 机械工程学报, 2017, 53(24): 118-125.
[11]	肖志瑜;叶旋;陆宇衡;胡磊;张文. 喷丸表面强化处理Fe-2Cu-2Ni-1Mo-1C材料的弯曲疲劳性能及断口分析[J]. , 2013, 49(20): 152-157.
[12]	叶雄林　朱有利　马丽丽　李占明. 超声冲击处理改善22SiMn2TiB钢焊接接头的疲劳性能[J]. , 2009, 45(8): 283-286.
[13]	王文先;马丽莉;慕伟;李晋永;王东坡;霍立兴;邓彩艳. AZ31B镁合金TIG焊焊接接头的疲劳性能[J]. , 2007, 43(10): 161-165.
[14]	王东坡;曹军辉;霍立兴;张玉凤. 承载超声冲击方法改善高应力比加载条件管接头疲劳性能[J]. , 2006, 42(5): 144-148.
[15]	王东坡;霍立兴;张玉凤;葛智海. 焊接残余应力对超声波冲击处理焊接接头疲劳性能的影响[J]. , 2004, 40(5): 150-154.

超声波冲击与TIG熔修复合强化改善高强钢焊接接头的疲劳性能

IMPROVING FATIGUE BEHAVIOR OF THE HIGH-STRENGTH WELDED JOINTS COMPOUND TREATED BY TIG DRESSING AND ULTRASONIC PEENING

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价