基于RSM-RVEA的FDM增材制造工艺参数优化方法

doi:10.3901/JME.2024.19.277

机械工程学报 ›› 2024, Vol. 60 ›› Issue (19): 277-297.doi: 10.3901/JME.2024.19.277

扫码分享

基于RSM-RVEA的FDM增材制造工艺参数优化方法

赵欣¹, 黄金杰^1,2,3

1. 哈尔滨理工大学计算机科学与技术学院哈尔滨 150080;
2. 哈尔滨理工大学自动化学院哈尔滨 150080;
3. 哈尔滨理工大学黑龙江省复杂智能系统与集成重点实验室哈尔滨 150080

收稿日期:2023-10-24 修回日期:2024-03-22 出版日期:2024-10-05 发布日期:2024-11-27
作者简介:赵欣,男,1993年出生,博士研究生。主要研究方向为先进制造、机器人学和计算机图形学。E-mail:zhaoxin5002@163.com;黄金杰(通信作者),男,1967年出生,博士,教授,博士研究生导师。主要研究方向为先进制造、计算机图形学和人工智能技术。E-mail:jjhuangps@163.com
基金资助:
国家自然科学基金(61305001)和黑龙江省自然科学基金(F201222)资助项目。

Optimization Methodology for Additive Manufacturing Parameter by Fused Deposition Modeling (FDM) Based on RSM-RVEA

ZHAO Xin¹, HUANG Jinjie^1,2,3

1. School of Computer Science and Technology, Harbin University of Science and Technology, Harbin 150080;
2. School of Automation, Harbin University of Science and Technology, Harbin 150080;
3. Heilongjiang Provincial Key Laboratory of Complex Intelligent System and Integration, Harbin University of Science and Technology, Harbin 150080

Received:2023-10-24 Revised:2024-03-22 Online:2024-10-05 Published:2024-11-27

摘要/Abstract

摘要： 与传统制造生产的效率相比，当前的3D打印生产效率仍相对较低。因此，如何优化工艺参数，以提升打印件性能、缩短打印时间和减少材料成本，对于提升制造效率来说至关重要。针对这一问题，借鉴传统多目标问题优化方法并结合数值分析，给出一种面向熔融沉积制造(Fused deposition modeling，FDM)的工艺参数优化方法。具体来说，该方法通过响应面法来引导和减少数值分析次数，所得到的回归方程采用基于参考向量引导的进化算法(Reference vector guided evolutionary algorithm，RVEA)来寻找工艺参数的Pareto最优解。同时引入角度惩罚技术，使得该方法在进化初期注重收敛性，在进化末期注重多样性，有效地提高了迭代计算的平衡性。相较于其他工艺参数优化方法，本方法能够更好地提升打印效率并降低制造成本，且具有较好的可靠性。

关键词: 熔融沉积成型, 参数优化, 有限元分析, 3D打印

Abstract: Compared to the efficiency of traditional manufacturing, the production efficiency of current 3D printing is still relatively low.Therefore, it is crucial that process parameters are optimized to enhance the performance of printed parts, shorten printing time, and reduce material costs, in order to lower printing costs.Addressing this issue, an optimization method for process parameters in fused deposition modeling (FDM) is proposed, drawing from traditional multi-objective optimization approaches and incorporating numerical analysis.Specifically, the Response Surface Methodology is used by this method to guide and reduce the number of numerical analyses.The regression equation that is obtained employs the reference vector guided evolutionary algorithm (RVEA) to find the Pareto optimal solutions for process parameters.Additionally, an angle penalty technique is introduced, focusing on convergence in the early stages of evolution and on diversity in the later stages, effectively balancing the iterative calculations.Upon comparison with other process parameter optimization methods, this approach is found to better enhance printing efficiency and reduce manufacturing costs.

Key words: fused deposition molding, parameter optimization, finite element analysis, 3D printing

中图分类号:

TH112

赵欣, 黄金杰. 基于RSM-RVEA的FDM增材制造工艺参数优化方法[J]. 机械工程学报, 2024, 60(19): 277-297.

ZHAO Xin, HUANG Jinjie. Optimization Methodology for Additive Manufacturing Parameter by Fused Deposition Modeling (FDM) Based on RSM-RVEA[J]. Journal of Mechanical Engineering, 2024, 60(19): 277-297.

导出引用管理器 EndNote|Reference Manager|ProCite|BibTeX|RefWorks

链接本文: http://www.cjmenet.com.cn/CN/10.3901/JME.2024.19.277

http://www.cjmenet.com.cn/CN/Y2024/V60/I19/277

参考文献

[1] SHEORAN A J，KUMAR H. Fused Deposition modeling process parameters optimization and effect on mechanical properties and part quality：Review and reflection on present research[J]. Materials Today：Proceedings，2020，21：1659-1672.
[2] VYAVAHARE S，KUMAR S，PANGHAL D. Experimental study of surface roughness，dimensional accuracy and time of fabrication of parts produced by fused deposition modelling [J]. Rapid Prototyping Journal，2020，26(9)：1535-1554.
[3] SHIRKE A，CHOUDHARI C，RUKHANDE S. Parametric optimization of fused deposition modelling (FDM) process using PSO algorithm[C]//International Conference on Advances in Thermal Systems，Materials and Design Engineering，Mumbai，ATSMDE，2017：1-6.
[4] KUIPERS T，DOUBROVSKI E L，WU J，et al. A framework for adaptive width control of dense contour- parallel toolpaths in fused deposition modeling[J]. Computer- Aided Design，2020，128：102907.
[5] ZAMAN U K U，BOESCH E，SIADAT A，et al. Impact of fused deposition modeling (FDM) process parameters on strength of built parts using Taguchi’s design of experiments[J]. The International Journal of Advanced Manufacturing Technology，2018，101(5-8)：1215-26.
[6] CAMPOSECO-NEGRETE C. Optimization of printing parameters in fused deposition modeling for improving part quality and process sustainability[J]. The International Journal of Advanced Manufacturing Technology，2020，108(7-8)：2131-2147.
[7] KUZNETSOV V E，TAVITOV A G，URZHUMTSEV O D，et al. Hardware factors influencing strength of parts obtained by fused filament fabrication[J]. Polymers (Basel)，2019，11(11)：1870.
[8] ARBEITER F，SPOERK M，WIENER J，et al. Fracture mechanical characterization and lifetime estimation of near-homogeneous components produced by fused filament fabrication[J]. Polymer Testing，2018，66：105-113.
[9] CASAVOLA C，CAZZATO A，MORAMARCO V，et al. Orthotropic mechanical properties of fused deposition modelling parts described by classical laminate theory [J]. Materials & Design，2016，90：453-458.
[10] SALAZAR-MARTIN A G，GARCIA-GRANADA A A，REYES G，et al. Time-dependent mechanical properties in polyetherimide 3D-printed parts are dictated by isotropic performance being accurately predicted by the generalized time hardening model[J]. Polymers (Basel)，2020，12(3)：678.
[11] BOSCHETTO A，BOTTINI L. Accuracy prediction in fused deposition modeling[J]. Int J Adv Manuf Technol，2014，73(5-8)：913-928.
[12] BOSCHETTO A，BOTTINI L. Design for manufacturing of surfaces to improve accuracy in Fused Deposition Modeling[J]. Robotics and Computer-Integrated Manufacturing，2016，37：103-114.
[13] ARMILLOTTA A，CAVALLARO M. Edge quality in fused deposition modeling：I. Definition and analysis[J]. Rapid Prototyping Journal，2017，23(6)：1079-1087.
[14] ARMILLOTTA A，BIANCHI S，CAVALLARO M，et al. Edge quality in fused deposition modeling：II. experimental verification[J]. Rapid Prototyping Journal，2017，23(4)：686-695.
[15] LALEHPOUR A，BARARI A. A more accurate analytical formulation of surface roughness in layer-based additive manufacturing to enhance the product's precision[J]. Int J Adv Manuf Technol，2018，96(9-12)：3793-804.
[16] CROCCOLO D，DE AGOSTINIS M，OLMI G. Experimental characterization and analytical modelling of the mechanical behaviour of fused deposition processed parts made of ABS-M30[J]. Comput Mater Sci，2013，79：506-518.
[17] DOMINGO-ESPIN M，PUIGORIOL-FORCADA J M，GARCIA-GRANADA A A，et al. Mechanical property characterization and simulation of fused deposition modeling Polycarbonate parts[J]. Materials & Design，2015，83：670-677.
[18] SOOD A K，OHDAR R K，MAHAPATRA S S. Improving dimensional accuracy of fused deposition modelling processed part using grey Taguchi method[J]. Materials & Design，2009，30(10)：4243-4252.
[19] XIA C，PAN Z，POLDEN J，et al. Modelling and prediction of surface roughness in wire arc additive manufacturing using machine learning[J]. Journal of Intelligent Manufacturing，2021，33(5)：1467-1482.
[20] LI L，ANAND S. Hatch pattern based inherent strain prediction using neural networks for powder bed fusion additive manufacturing[J]. Journal of Manufacturing Processes，2020，56：1344-1352.
[21] GORSKI F，WICHNIAREK R，KUCZKO W，et al. Selection of Fused Deposition Modeling process parameters using finite element analysis and genetic algorithms[J]. J Mult-Valued Log Soft Comput，2019，32(3-4)：293-311.
[22] PANDA B N，SHANKHWAR K，GARG A，et al. Performance evaluation of warping characteristic of fused deposition modelling process[J]. The International Journal of Advanced Manufacturing Technology，2016，88(5-8)：1799-1811.
[23] CHENG R，JIN Y C，OLHOFER M，et al. A reference vector guided evolutionary algorithm for many-objective optimization[J]. Ieee Transactions on Evolutionary Computation，2016，20(5)：773-791.
[24] Hambali R H，Celik H K，Smith P C，et al. Effect of build orientation on FDM parts：A case study for validation of deformation behaviour by FEA[C]//Proceedings of iDECON 2010—international conference on design and concurrent engineering，Universiti Teknikal Malaysia Melaka，Melaka：iDECON 2010：224-228.
[25] VERMA P，UBAID J，SCHIFFER A，et al. Essential work of fracture assessment of acrylonitrile butadiene styrene (ABS) processed via fused filament fabrication additive manufacturing[J]. The International Journal of Advanced Manufacturing Technology，2021，113(3-4)：771-784.
[26] ZENG K，PAL D，PATIL N，et al. A new dynamic mesh method applied to the simulation of selective laser melting[C]//2013 International Solid Freeform Fabrication Symposium. Austin：University of Texas at Austin，2013.
[27] PADUA D. Encyclopedia of parallel computing[M]. Germany：Springer Science & Business Media，2011.
[28] COELLO C A C，LAMONT G B，VAN VELDHUIZEN D A. Evolutionary algorithms for solving multi-objective problems[M]. Berlin：Springer，2007.
[29] PLASTICS A C D-O，INTERNATIONAL A，TESTING A S F，et al. Standard Test Method for Tensile Properties of Plastics[M]. American：ASTM International，2014.
[30] PAUL S. Finite element analysis in fused deposition modeling research：A literature review [J]. Measurement，2021，178：10.
[31] ESUN. ABS filament for 3D Printer ABS plastic eSUN3D material. [EB/OL]. [2000-01-08]. https：// www.esun3d. com/abs-product/.
[32] ANTON S，THOMAS A，MARKUS G，et al. Finite element analysis of thermoplastic probes under tensile load using LS-DYNA compared to ANSYS WB 14 in correlation to experimental investigations[C]// Proceedings of the ANSYS Conference & 30th CADFEM Users' Meeting，Kassel：ANSYS，2012.
[33] MEDINA-SANCHEZ G，DORADO-VICENTE R，TORRES-JIMENEZ E，et al. Build time estimation for fused filament fabrication via average printing speed[J]. Materials (Basel)，2019，12(23)：3982.
[34] GEN M，CHENG R. Genetic algorithms and engineering optimization [M]. New Jersey：John Wiley & Sons，1999.
[35] DEB K，PRATAP A，AGARWAL S，et al. A fast and elitist multiobjective genetic algorithm：NSGA-II[J]. IEEE Transactions on Evolutionary Computation，2002，6(2)：182-197.
[36] ZHAO F，HUAN L，ZHANG Y，et al. A novel multi-objective optimization algorithm based on differential evolution and NSGA-II[C]//2018 IEEE 22nd International Conference on Computer Supported Cooperative Work in Design. New York：IEEE，2018：570-575.
[37] DEB K，JAIN H. An evolutionary many-objective optimization algorithm using reference-point-based nondominated sorting approach，part I：Solving problems with box constraints[J]. IEEE Transactions on Evolutionary Computation，2013，18(4)：577-601.

基于RSM-RVEA的FDM增材制造工艺参数优化方法

Optimization Methodology for Additive Manufacturing Parameter by Fused Deposition Modeling (FDM) Based on RSM-RVEA

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	张步云, 王祥, 罗明露, 王勇, 张云顺, 徐兴, TAN Chin-An. 一种充气式液电馈能悬架结构设计及其性能优化[J]. 机械工程学报, 2026, 62(7): 244-254.
[2]	刘俊杰, 张友超, 张厚超, 张兵, 许权, 朱晓阳, 兰红波. 基于电场驱动微3D打印增减材复合制造高精度铜基柔性透明电路[J]. 机械工程学报, 2026, 62(7): 427-438.
[3]	许鸿伟, 刘丽兰, 张洁, 秦威, 邢宏文, 汪玮, 刘思仁, 吕佑龙. 工业大模型驱动的航空智能制造AI孪生控制方法体系[J]. 机械工程学报, 2026, 62(5): 61-73.
[4]	刘佩儒, 魏发南, 姚立纲, 刘晓敏. 基于导电聚合物水凝胶改性的3D打印柔性电感器研究[J]. 机械工程学报, 2026, 62(5): 347-356.
[5]	刘长勇, 吴怀安, 李琛, 黄柯豪, 刘志远, 陈张伟, 张磊. 基于旋转喷头的四轴联动多材料同步3D打印技术及其工艺研究[J]. 机械工程学报, 2026, 62(5): 399-407.
[6]	李桂伟, 曹祺原, 王嘉庆, 赵一航, 吴文征. 先进材料增材制造研究与发展[J]. 机械工程学报, 2026, 62(3): 15-45.
[7]	何超凡, 吴琦林, 乔天鸿, 孙元, 高庆, 王鹏, 马梁, 尹俊, 杨华勇, 贺永. 投影式生物3D打印：原理、挑战与应用[J]. 机械工程学报, 2026, 62(3): 46-69.
[8]	邓贺元, 方永聪, 张婷, 熊卓. 高通量生物3D打印及其在类器官构建中的应用[J]. 机械工程学报, 2026, 62(3): 70-85.
[9]	刘腾飞, 杨腾锐, 田小永, 吴玲玲, 李涤尘. 面向空间极端环境的聚醚醚酮及其复合材料真空3D打印工艺机理与性能[J]. 机械工程学报, 2026, 62(3): 271-281.
[10]	王勇强, 张厚超, 黄君杰, 李红珂, 朱晓阳, 杨建军, 兰红波. 基于气/电/热协同驱动喷射微3D打印低成本制造高精度共形薄膜[J]. 机械工程学报, 2026, 62(3): 298-310.
[11]	谭励, 余煌, 杜小强, 贺磊盈, 马锃宏. 基于稳定夹持的类球形果实采摘末端执行器优化设计与试验[J]. 机械工程学报, 2026, 62(3): 353-365.
[12]	林棻, 朱晓龙, 赵又群, 刘轩江, 臧利国. 铰链分布数量对机械弹性车轮力学特性的影响[J]. 机械工程学报, 2026, 62(2): 344-353.
[13]	廖朋朋, 周帼彦, 张玉财, 张显程, 蒋文春, 涂善东. 基于钎料适配性的航空发动机回热器寿命提升方法研究[J]. 机械工程学报, 2025, 61(6): 103-111.
[14]	付玲, 易斌, 尹莉, 薛丁琪, 任会礼, 王江超. 随焊感应加热尺寸和热源数对焊接失稳变形的影响[J]. 机械工程学报, 2025, 61(6): 112-120.
[15]	刘晓军, 单忠德, 刘检华, 刘丰, 李志坤, 张敬科, 郭珍珍. 连续纤维3D打印张力自适应调控方法和装置优化研究[J]. 机械工程学报, 2025, 61(5): 250-262.