机械装备可再制造性评价研究综述

doi:10.3901/JME.2022.03.221

摘要/Abstract

摘要： 可再制造性评价是机械装备再制造工程的重要组成部分，关系到再制造产品的服役安全性与可靠性。由于机械装备再制造的特殊性，使得可再制造性评价面临众多挑战。介绍了可再制造性评价特点，详细阐述了目前可再制造性评价研究的现状，归纳讨论了可再制造性评价方法、可再制造性评价基础科学问题等研究热点。分析目前可再制造性评价研究存在的问题与难点，指出机械装备可再制造性评价的发展趋势，为今后丰富可再制造性评价研究提供可以借鉴的研究方向。

关键词: 再制造, 可再制造性评价, 可再制造性, 机械装备

Abstract: Remanufacturability evaluation is an important part of remanufacturing engineering of mechanical equipment, which is related to whether remanufacturing objects can be remanufactured and the service safety of remanufactured products. Many challenges exist in the remanufacturability evaluation due to the particularity of mechanical equipment remanufacturing. Due to the particularity of remanufacturing of mechanical equipment, remanufacturability evaluation faces many challenges. The characteristics of remanufacturability evaluation are introduced, and the status of remanufacturability evaluation study is described in detail. The remanufacturability evaluation methods and basic scientific issues of remanufacturability evaluation are summarized and discussed. This study also analyzes the existing problems and difficulties of remanufacturability evaluation, points out the development trend, and provides reference research direction for enriching remanufacturability evaluation research in the future.

Key words: remanufacturing, remanufacturability evaluation, remanufacturability, mechanical equipment

中图分类号:

TH122

王金龙, 高斯博, 杨宇星, 鲍永杰, 张元良. 机械装备可再制造性评价研究综述[J]. 机械工程学报, 2022, 58(3): 221-234.

WANG Jinlong, GAO Sibo, YANG Yuxing, BAO Yongjie, ZHANG Yuanliang. Review of the Remanufacturability Evaluation of Mechanical Equipment[J]. Journal of Mechanical Engineering, 2022, 58(3): 221-234.

参考文献

[1] 曹华军,李洪丞,曾丹,等. 绿色制造研究现状及未来发展策略[J]. 中国机械工程,2020,31(2):135-144. CAO Huajun,LI Hongcheng,ZENG Dan,et al. The state-of-art and future development strategies of green manufacturing[J]. China Mechanical Engineering,2020,31(2):135-144.
[2] 张明. 离心压缩机叶轮材料FV520B超高周疲劳行为与机理研究[D]. 济南:山东大学,2015. ZHANG Ming. Research on fatigue behavior and mechanism of FV520B in very high cycle regime[D]. Jinan:Shandong University,2015.
[3] 刘赟,徐滨士,史佩京,等. 废旧产品再制造性评估指标[J]. 中国表面工程,2011,24(5):94-99. LIU Yun,XU Binshi,SHI Peijing,et al. Assessment indexes of used products remanufacturability[J]. China surface engineering,2011,24(5):94-99.
[4] 龚青山. 面向再制造的机械装备多目标优化设计研究[D]. 武汉:武汉科技大学,2019. GONG Qingshan. Research on Multi-objective optimization design method of mechanical equipment design for remanufacturing[D]. Wuhan:Wuhan University of Science and Technology,2019.
[5] 徐滨士. 装备绿色再制造工程及其发展前景[J]. 装备指挥技术学院学报,2003(1):1-4. XU Binshi. Remanufacture engineering for equipment and its development[J]. Journal of the Academy of Equipment Command& Technology,2003(1):1-4.
[6] 全国绿色制造技术标准化技术委员会. GB/T 32811-2016,机械产品再制造性评价技术规范[S]. 北京:标准出版社,2016. National Green Manufacturing Technology Standardization Technical Committee. GB/T 32811-2016, Technical specification for remanufacturability evaluation of mechanical products[S]. Beijing:Standards Press,2016.
[7] 张宗翔,肖素梅,石宇强,等. 基于产品特性的可再制造性评价研究[J]. 机械制造与自动化,2010,39(1):74-76. ZHANG Zongxiang,XIAO Sumei,SHI Yuqiang,et al. Assessment of remanufactureability based on property of product[J]. Machine Building & Automation,2010,39(1):74-76.
[8] LUND R. Remanufacturing[J]. Technology Review,1984,87(2):18-23.
[9] 刘晓叙,张海秀. 产品可再制造性判断准则研究[J]. 四川理工学院学报,2007(6):76-78. LIU Xiaoxu,ZHANG Haixiu. Study on the criteria for judging the remanufacture of products[J]. Journal of Sichuan University of Science & Engineering,2007(6):76-78.
[10] 杜彦斌,廖兰. 基于失效特征的机械零部件可再制造度评价方法[J]. 计算机集成制造系统,2015,21(1):135-142. DU Yanbin,LIAO Lan. Remanufacturability evaluation method for mechanical parts based on failure features[J]. Computer Integrated Manufacturing Systems,2015,21(1):135-142.
[11] 向红. 废旧机电产品可再制造性评价研究及应用[D]. 武汉:武汉科技大学,2016. XIANG Hong. Research on remanufacturability evaluation for used electromechanical products and its application[D]. Wuhan:Wuhan University of Science and Technology,2016.
[12] 张旭刚. 废旧机床再制造性评估与再制造工艺方案决策方法研究[D]. 武汉:武汉科技大学,2014. ZHANG Xugang. Study on remanufacturability evaluation and remanufacturing process decision methods of machine tool[D]. Wuhan:Wuhan University of Science and Technology,2014.
[13] 蒋小利. 基于多寿命特征的废旧机电产品可再制造性评价方法研究[D]. 武汉:武汉科技大学,2014. JIANG Xiaoli. Research on remanufacturability evaluation method for used electromechanical products based on multiple life characteristics[D]. Wuhan:Wuhan University of Science and Technology,2014.
[14] 游雄雄. 矿冶典型零部件退化状态识别与剩余寿命预测及可再制造性评估[D]. 赣州:江西理工大学,2015. YOU Xiongxiong. Remanufacturing assessment of the key technology based on waste parts degradation status and remaining life prediction[D]. Ganzhou:Jiangxi University of Science and Technology,2015.
[15] 贾玄彬. TBM刀盘裂纹萌生寿命及再制造性评价研究[D]. 天津:天津大学,2018. JIA Xuanbin. Research on crack initiation life and remanufacture evaluation of TBM cutter-head[D]. Tianjin:Tianjin University,2018.
[16] 刘建琴,贾玄彬,郭伟,等. 基于裂纹萌生的TBM刀盘地质匹配及失效研究[J]. 天津大学学报,2017,50(11):1148-1153. LIU Jianqin,JIA Xuanbin,GUO Wei,et al. Research on TBM cutter-head geological matching and failure based on crack initiation[J]. Journal of Tianjin University,2017,50(11):1148-1153.
[17] 侴露. 产品剩余寿命预测方法与可再制造性评估研究[D]. 沈阳:东北大学,2008. CHOU Lu. The residual life prediction method and can be reassessment study of manufacturing[D]. Shenyang:Northeastern University,2008.
[18] 张国庆. 零件剩余疲劳寿命预测方法与产品可再制造性评估研究[D]. 上海:上海交通大学,2007. ZHANG Guoqing. Study on residual fatigue life prediction methods of remanufacturing parts and assessment of remanufacturability[D]. Shanghai:Shanghai Jiao Tong University,2007.
[19] 刘行. 面向再制造的报废汽车发动机曲轴剩余疲劳寿命预测及再设计[D]. 呼和浩特:内蒙古工业大学,2018. LIU Hang. Residual fatigue life prediction and redesign of scrap automobile enginee crankshaft for remanufacturing[D]. Hohhot:Inner Mongolia University of Technology,2018.
[20] 张国庆,荆学东,浦耿强,等. 汽车发动机可再制造性评价[J]. 中国机械工程,2005(8):739-742. ZHANG Guoqing,JING Xuedong,PU Gengqiang,et al. Assessment on remanufacturability of the automobile engines[J]. China Mechanical Engineering,2005(8):739-742.
[21] 张国庆,荆学东,浦耿强,等. 产品可再制造性评价方法与模型[J]. 上海交通大学学报,2005(9):1431-1436. ZHANG Guoqing,JING Xuedong,PU Gengqiang,et al. The assessment method and model of remanufacturability[J]. Journal of Shanghai Jiaotong University,2005(9):1431-1436.
[22] 王玉琳,胡锦强,柯庆镝,等. 基于轴心轨迹特征的发动机曲轴再制造性分析方法[J]. 中国机械工程,2017,28(13):1601-1607. WANG Yulin,HU Jinqiang,KE Qingdi,et al. Remanufacturability analysis method for engine crankshafts based on shaft center trajectory[J]. China Mechanical Engineering,2017,28(13):1601-1607.
[23] 陈海峰. 退役机床齿轮零件剩余疲劳寿命预测研究及其可再制造性评估[D]. 重庆:重庆大学,2014. CHEN Haifeng. Study on gears' remaining fatigue life prediction and remanufacturability of used machine tool[D]. Chongqing:Chongqing University,2014.
[24] 崔翔,张秀芬,刘佳. 基于失效的退役曲轴再制造性层次评价[J]. 机械设计与研究,2020,36(4):138-141. CUI Xiang,ZHANG Xiufen,LIU Jia. Hierarchy evaluation process of remanufacturability of retired crankshaft based on failure[J]. Machine Design and Research,2020,36(4):138-141.
[25] 朱胜,徐滨士,姚巨坤. 再制造设计基础及方法[J]. 中国表面工程,2003,16(3):27-31. ZHU Sheng,XU Binshi,YAO Jukun. Study on the foundation and method of remanufacturing design[J]. China Surface Engineering,2003,16(3):27-31.
[26] 姚巨坤,朱胜,崔培枝. 面向再制造全过程的再制造设计[J]. 机械工程师,2004(1):27-29. YAO Jukun,ZHU Sheng,CUI Peizhi. Remanufacturing Design Facing to Total Remanufacturing Process[J]. Mechanical Engineer,2004(1):27-29.
[27] 朱胜,姚巨坤. 装备再制造设计及其内容体系[J]. 中国表面工程,2011,24(4):1-6. ZHU Sheng,YAO Jukun. Equipment remanufacturing design and its content system[J]. China Surface Engineering,2011,24(4):1-6.
[28] ONG S K,FANG H C,NEE A. A design feature-based approach for product remanufacturability assessment and analysis[J]. Procedia CIRP,2016,53:15-20.
[29] FANG H C,ONG S K,NEE A Y C. An integrated approach for product remanufacturing assessment and planning[J]. Procedia CIRP,2016,40:262-267.
[30] FANG H C,ONG S K,NEE A. Product remanufacturability assessment and implementation based on design features[J]. Procedia CIRP,2015,26:571-576.
[31] 刘韶光. 基于物元模型的汽车曲轴可再制造性评价研究[J]. 公路与汽运,2010(1):1-4. LIU Shaoguang. Research on the remanufacturability evaluation of automobile crankshaft based on matter-element model[J]. Highway and Transportation, 2010(1):1-4.
[32] 刘韶光. 汽车曲轴再制造评价技术研究[D]. 武汉:武汉理工大学,2010. LIU Shaoguang. Research on the evaluation technique of vehicle crankshaft remanufacturing[D]. Wuhan:Wuhan University of Technology,2010.
[33] 赵旭,张闻雷,陈东,等. 基于设计矩阵和熵的可再制造性量化评价方法[J]. 机械设计,2015,32(8):46-50. ZHAO Xu,ZHANG Wenlei,CHEN Dong,et al. Quantitative assessment method of remanufacturability based on design structure matrices and entropy[J]. Journal of Machine Design,2015,32(8):46-50.
[34] 姚巨坤,朱胜,崔培枝,等. 再制造性工程[M]. 北京:机械工业出版社,2020. YAO Jukun,ZHU Sheng,CUI Peizhi,et al. Remanufacturability engineering[M]. Beijing:China Machine Press,2020.
[35] 薛怀坤,由世俊,张欢,等. 冷水机组可再制造性综合评价研究[J]. 暖通空调,2014,44(8):12-17. XUE Huaikun,YOU Shijun,ZHANG Huan,et al. Study on comprehensive evaluation of chiller remanufacturing[J]. Heating Ventilating & Air Conditioning,2014,44(8):12-17.
[36] 杨琪,张小燕. 废旧机床再制造评价模型构建[J]. 价值工程,2017,36(32):99-100. YANG Qi,ZHANG Xiaoyan. Construction of evaluation model for remanufacturing of waste machine tools[J]. Value Engineering,2017,36(32):99-100.
[37] 李丽,金嘉琦,姜兴宇,等. 废旧零部件可再制造质量评价与分类研究[J]. 组合机床与自动化加工技术,2017(9):45-49. LI Li,JIN Jiaqi,JIANG Xingyu,et al. Research on quality evaluation and classification for used parts remanufacturing[J]. Modular Machine Tool & Automatic Manufacturing Technique,2017(9):45-49.
[38] 郭节琴,刘渤海,丰奇倩,等. 机电产品再制造性评价研究概况[C]//第十四届(2019)中国管理学年会,2019:6. GUO Jieqin, LIU Bohai, FENG Qiqian, et al. Overview of research on remanufacturability evaluation of mechanical and electrical products[C]//The Fourteenth (2019) China Management Conference, 2019:6.
[39] 刘明生. 汽车曲轴可再制造性评价方法[J]. 装备制造技术,2016(7):114-118. LIU Mingsheng. Evaluation Method of Remanufacturing Automotive Crankshaft[J]. Equipment Manufacturing Technology,2016(7):114-118.
[40] ZHANG Xugang,TANG Yuanjie,ZHANG Hua,et al. Remanufacturability evaluation of end-of-life products considering technology,economy and environment:A review[J]. Science of The Total Environment,2020,764(5):142922.
[41] 钟骏杰,范世东,姚玉南,等. 再制造性综合评估研究[J]. 中国机械工程,2003,24:47-50,5. ZHONG Junjie,FAN Shidong,YAO Yunan,et al. Research on synthetical assessment for remanufacturability[J]. China Mechanical Engineering,2003,24:47-50,5.
[42] ZHANG Xugang,AO Xiuyi,JIANG Zhigang,et al. A remanufacturing cost prediction model of used parts considering failure characteristics[J]. Robotics and Computer Integrated Manufacturing,2019,59:291-296.
[43] 陈胜利,张朝嘉. 考虑环境性能和再制造能力的闭环供应链讨价还价协调策略[J]. 计算机集成制造系统,2019,25(5):1283-1295. CHEN Shengli,ZHANG Chaojia. Bargaining coordination strategy of closed-loop supply chain with consideration of environmental performance and remanufacturability[J]. Computer Integrated Manufacturing Systems,2019,25(5):1283-1295.
[44] LIU Qingtao,SHANG Ziyu,DING Kai,et al. Multi-process routes based remanufacturability assessment and associated application on production decision[J]. Journal of Cleaner Production,2019:240.
[45] 毛果平,朱有为,吴超. 废旧机电产品再制造性评估模型研究[J]. 现代制造工程,2009(6):114-118. MAO Guoping,ZHU Youwei,WU Chao. A remanufacturability assessing model for waste electromechanical products[J]. Modern Manufacturing Engineering,2009(6):114-118.
[46] 韩夏冰. 工程机械产品可再制造性与金属腐蚀程度评价研究[D]. 天津:天津大学,2012. HAN Xiabing. The assessment research of remanufacturability and the evaluation of metal corrosion degree[D]. Tianjin:Tianjin University,2012.
[47] 申立艳. 机电产品的可再制造性评价研究[D]. 济南:山东大学,2008. SHEN Liyan. Research of evaluating the remanufacturingability of electromechanical products[D]. Jinan:Shandong University,2008.
[48] 龚青山. 面向再制造的机械装备多目标优化设计研究[D]. 武汉:武汉科技大学,2019. GONG Qingshan. Research on multi-objective optimization design method of mechanical equipment design for remanufacturing[D]. Wuhan:Wuhan University of Science and Technology,2019.
[49] 时君丽. 基于LCSA的机械装备多维度可再制造性分析方法研究[D]. 大连:大连理工大学,2017. SHI Junli. Analysis method research on multi-dimensional remanufacturability of mechanical equipment based on LCSA theory[D]. Dalian:Dalian University of Technology,2017.
[50] SHI Junli,LI Tao,LIU Zhichao. A three-dimensional method for evaluating the remanufacturability of used engines[J]. Int. J. of Sustainable Manufacturing,2015,3(4).
[51] 任仲贺,武美萍,龚玉玲,等. 机械零部件可再制造性评价模型研究与应用[J]. 机械科学与技术,2019,38(2):244-252. REN Zhonghe. WU Meiping,GONG Yuling,et al. Research and application of remanufacturability evaluation method for mechanical parts[J]. Mechanical Science and Technology for Aerospace Engineering,2019,38(2):244-252.
[52] 刘丽,王辉,高蕾娜. 废旧机床绿色再制造性评价模型研究[J]. 成都大学学报,2017,36(3):296-298. LIU Li,WANG Hui,GAO Leina. Evaluation Model Research on Green Remanufacturability of Used Machine Tools[J]. Journal of Chengdu University,2017,36(3):296-298.
[53] 付忠琦,杜朔,赵家宝,等. 废旧机床再制造性评估与再制造工艺方案设计[J]. 科技与企业,2016(7):252. FU Zhongqi, DU Shuo, ZHAO Jiabao, et al. Remanufacturability evaluation and remanufacturing process design of scrap machine tools[J]. Science and Technology and Enterprise,2016(7):252
[54] 李丽. 废旧机床再制造设计质量控制方法研究[D]. 沈阳:沈阳工业大学,2018. LI Li. Research on remanufacturing design quality control method for the used machine tools[D]. Shenyang:Shenyang University of Technology,2018.
[55] 李丽,金嘉琦,姜兴宇,等. 废旧零部件可再制造质量评价与分类研究[J]. 组合机床与自动化加工技术,2017(9):45-49. LI Li,JIN Jiaqi,JIANG Xingyu,et al. Research on quality evaluation and classification for used parts remanufacturing[J]. Modular Machine Tool & Automatic Manufacturing Technique,2017(9):45-49.
[56] 蒋小利,江志刚,张华,等. 基于实例推理的废旧零部件可再制造性评价模型及应用[J]. 现代制造工程,2013(12):6-9. JIANG Xiaoli,JIANG Zhigang,ZHANG Hua,et al. A case-based reasoning model for evaluating remanufacturability of used parts and its application[J]. Modern Manufacturing Engineering,2013(12):6-9.
[57] 卢超,潘尚峰,孙江宏. 重型机床基础件再制造评价指标体系的建立及指标值求解方法[J]. 制造技术与机床,2018(1):60-63. LU Chao,PAN Shangfeng,SUN Jianghong. Establishment of evaluation index system and index value solving method for remanufacturing of heavy machine tool base parts[J]. Manufacturing Technology & Machine Tool,2018(1):60-63.
[58] 杜彦斌. 退役机床再制造评价与再设计方法研究[D]. 重庆:重庆大学,2012. DU Yanbin. Study on evaluation and redesign methods of machine tool remanufacturing[D]. Chongqing:Chongqing University,2012.
[59] DU Yanbin,CAO Huajun,LIU Fei,et al. An integrated method for evaluating the remanufacturability of used machine tool[J]. Journal of Cleaner Production,2011,20(1):82-91.
[60] 秦训鹏,郭巍,胡志力,等. 退役汽车梯度资源化及其零部件可再制造性评价[J]. 表面工程与再制造,2015,15(3):34-37. QIN Xunpeng, GUO Wei, HU Zhili, et al. Gradient resource utilization of retired automobiles and evaluation of remanufacturability of parts[J]. Surface Engineering and Remanufacturing,2015,15(3):34-37.
[61] 侯林,高波,刘海春. 农机产品再制造性评价系统研究[J]. 农机化研究,2012,34(7):36-38,42. HOU Lin,GAO Bo,LIU Haichun. Agricultural machinery remanufacturing evaluation system research[J]. Journal of Agricultural Mechanization Research,2012,34(7):36-38,42.
[62] 武园园. 农机产品再制造性评价研究[D]. 保定:河北农业大学,2010. WU Yuanyuan. Evaluation of the agriculture machinery remanufacturability[D]. Baoding:Hebei Agricultural University,2010.
[63] 罗井知. 基于信息追溯的退役工程机械再制造过程绿色性评价研究[D]. 长沙:湖南大学,2014. LUO Jinzhi. Study on green performance assessment of retired construction machinery remanufacturing process based on information tracing[D]. Changsha:Hunan University,2014.
[64] 曾寿金,刘志峰,江吉彬. 基于模糊AHP的机电产品绿色再制造综合评价方法及应用[J]. 现代制造工程,2012(7):1-6. ZENG Shoujin,LIU Zhifeng,JIANG Jibin. Green remanufacturing comprehensive assessment method and its application of electromechanical products based on fuzzy AHP[J]. Modern Manufacturing Engineering,2012(7):1-6.
[65] THOMAS A. OMWANDO W A. OTIENO S F,et al. A Bi-level fuzzy analytical decision support tool for assessing product remanufacturability[J]. Journal of Cleaner Production,2018,174.
[66] 向琴. 基于ECC的工程机械再制造方案决策研究[D].武汉:武汉科技大学,2017. XIANG Qin. Study on manufacturability in optimal recovery period for in service of construction machinery based on ECC[D].Wuhan:Wuhan University of Science and Technology,2017.
[67] 张秀芬,高云飞. 退役机械零部件多维递阶再制造性评价方法[J]. 浙江大学学报,2020,54(5):954-962. ZAHNG Xiufen,GAO Yunfei. Multi-dimensional hierarchical remanufacturability evaluation method for end-of-life mechanical parts[J]. Journal of Zhejiang University,2020,54(5):954-962.
[68] 高云飞. 退役机械零部件再制造可行性判断与反馈机制研究[D]. 呼和浩特:内蒙古工业大学,2020. GAO Yunfei. Research on the feasibility judgment and feedback mechanism of remanufacturing retired mechanical parts[D]. Hohhot:Inner Mongolia University of Technology,2020.
[69] 王晶晶. 机电产品再制造性评价研究[D]. 郑州:郑州大学,2009. WANG Jingjing. Research on remanufacturability evaluation of electromechanical products[D]. Zhengzhou:Zhengzhou university,2009.
[70] 伍俊舟,王玫,袁敏. 基于模糊可拓层次分析法的机电产品再制造性评价方法及应用[J]. 组合机床与自动化加工技术,2016(9):153-156. WU Junzhou,WANG Mei,YUAN Min. Evaluation method and application of mechanical and electrical products' remanufacture-ability based on fuzzy-EAHP[J]. Modular Machine Tool & Automatic Manufacturing Technique,2016(9):153-156.
[71] 王迎超,尚岳全,孙红月,等. 基于熵权-理想点法的岩爆烈度预测模型及其应用[J]. 煤炭学报,2010(2):218-221. WANG Yingchao,SHANG Yuequan,SUN Hongyue,et al. Research and application of rockburst intensity prediction model based on entropy coefficient and ideal point method[J]. Journal of China Coal Society,2010(2):218-221.
[72] 杨琪. 废旧机床再制造性评估研究[D]. 西安:西安工程大学,2018. YANG Qi. Research on remanufacturing evaluation of used machine tool[D]. Xi'an:Xi'an Polytechnic University,2018.
[73] 王金龙. 叶片材料FV520B-1超高周疲劳寿命预测及基于疲劳损伤的可再制造性判断研究[D]. 大连:大连理工大学,2019. WANG Jinlong. Study of very-high cycle fatigue life prediction and remanufacturability judgment based on fatigue defect for impeller material FV520B-I[D]. Dalian:Dalian University of Technology,2019.
[74] WANG Jinlong,ZHANG Yuanliang,LIU Shujie,et al. Competitive giga-fatigue life analysis owing to FV520B-I[J]. International Journal of Fatigue,2016,87:203-209.
[75] WANG Jinlong,YAN Yangyang,YU Jing,et al. Fatigue evaluation of FV520B-I shrouded impeller blade with fatigue crack based on FEA and fracture mechanics[J]. Engineering Failure Analysis,2020,115:104663.
[76] 王金龙,张元良,赵清晨,等. 再制造毛坯疲劳损伤临界阈值及可再制造性判断研究[J]. 机械工程学报,2017,53(5):41-49. WANG Jinlong,ZHANG Yuanliang,ZHAO Qingchen,et al. Study of fatigue defect critical threshold of remanufacturing cores and judgment of re-manufacturability based on fatigue defect[J]. Journal of Mechanical Engineering,2017,53(5):41-49.
[77] ZHANG Yuanliang,WANG Jinlong,SUN Qingchao,et al. Fatigue life prediction of FV520B with internal inclusions[J]. Materials & Design,2015,69:241-246.
[78] LIU Shujie,LIU Chi,HU Yawei,et al,Fatigue life assessment of centrifugal compressor impeller based on FEA[J]. Engineering Failure Analysis,2016,60:383-390.
[79] LIU Chi,LIU Shujie,GAO Sibo,et al. Fatigue life assessment of the centrifugal compressor impeller with cracks based on the properties of FV520B[J]. Engineering Failure Analysis,2016,66:177-186.
[80] 王常浩,刘淑杰,王轶凡,等. 再制造航空发动机涡轮盘LCF寿命预测研究[J]. 大连理工大学学报,2019,59(4):366-371. WANG Changhao,LIU Shujie,WANG Yifan,et al. Research on low cycle fatigue life prediction of remanufactured turbine disk on aeroengine[J]. Journal of Dalian University of Technology,2019,59(4):366-371.
[81] ZHANG Ming,WANG Weiqiang,WANG Pengfei,et al. The fatigue behavior and mechanism of FV520B-I with large surface roughness in a very high cycle regime[J]. Engineering Failure Analysis,2016,66.
[82] 张明. 离心压缩机叶轮材料FV520B超高周疲劳行为与机理研究[D]. 济南:山东大学,2015. ZHANG Ming. Research on fatigue behavior and mechanism of FV520B in very high cycle regime[D]. Jinan:Shandong University,2015.
[83] 王鹏飞. KMN钢的高周/超高周疲劳机理与剩余寿命估算方法研究[D]. 济南:山东大学,2018. WANG Pengfei. Research on high/very high cycle fatigue mechanism and residual life estimation method of KMN steel[D]. Jinan:Shandong University,2018.
[84] WANG Pengfei,WANG Weiqiang,ZHANG Ming,et al. Fatigue behavior and mechanism of KMN in a very high cycle regime[J]. Materials Testing,2018,60(1):55-60.
[85] WANG Pengfei,WANG Weiqiang,LI Jianfeng. Research on Fatigue damage of compressor blade steel KMN-I using nonlinear ultrasonic testing[J]. Shock and Vibration,2017,1:1-11.
[86] WANG Pengfei,WANG Weiqiang,LI Aiju,et al. Effects of microstructure and inclusions on very high cycle fatigue properties of compressor blade steels[J]. Strength,Fracture and Complexity,2017,10(1):1-9.
[87] 刘子武. FV520b钢熔覆再制造层冲蚀磨损规律及机理研究[D]. 济南:山东大学,2017. LIU Ziwu. Research on erosion wear law and mechanism of cladding repaired FV520B Steel[D]. Jinan:Shandong University,2017.
[88] LIU Ziwu.,LI Jianfeng,JIA Xiujie,et al. Establishment and analysis of erosion depth model for impeller material FV520B[J]. International Journal of Precision Engineering and Manufacturing-Green Technology,2016,3(1):27-34.
[89] 柴保明,白岩龙,刘建琴,等. 再制造全断面隧道掘进机刀盘多元损伤探究[J]. 河北工程大学学报,2017,34(2):109-112. CHAI Baoming,BAI Yanlong,LIU Jianqin,et al. Research on multiple damage of remanufacturing TBM cutterhead[J]. Journal of Hebei University of Engineering,2017,34(2):109-112.
[90] HAN Z Y,LIU G Н,FU H Н. A review of residual life prediction for remanufacturing of machine tool[J]. Applied Mechanics & Materials,2014,552:133-138.
[91] 伍建军,游雄雄,吴事浪,等. 典型矿冶废旧零部件剩余寿命预测模型与可再制造性评估决策方法[J]. 机械科学与技术,2014,12(33):1859-1864. WU Jianjun,YOU Xiongxiong,WU Shilang,et al. Remanufacturing assessment of typical mining waste parts based on remaining life prediction model[J]. Mechanical Science and Technology for Aerospace Engineering,2014,12(33):1859-1864.
[92] 伍建军,游雄雄,吴事浪,等. 两参数威布尔分布的废旧矿冶零部件再制造剩余寿命预测新方法[J]. 机械科学与技术,2016,35(4):589-593. WU Jianjun,YOU Xiongxiong,WU Shilang,et al. Residual life prediction of remanufacturing for mining waste parts based on two-parameter weibull distribution[J]. Mechanical Science and Technology for Aerospace Engineering,2016,35(4):589-593.
[93] 伍建军,游雄雄,吴事浪,等. 非等间距灰色法预测废旧零件剩余寿命研究[J]. 机械设计与制造,2015(6):126-128. WU Jianjun,YOU Xiongxiong,WU Shilang,et al. The non-equidistance gray method to predict the residual life of waste parts research[J]. Machinery Design & Manufacture,2015(6):126-128.
[94] 伍建军,游雄雄,吴事浪,等. 改进灰色法的废旧设备剩余寿命预测研究[J]. 现代制造工程,2016(3):134-137. WU Jianjun,YOU Xiongxiong,WU Shilang,et al. The improved gray method to predict the residual life of waste equipment research[J]. Modern Manufacturing Engineering,2016(3):134-137.
[95] 宋守许,汪志全,蔚辰. 基于在线监测的曲轴主动再制造时机识别[J]. 现代制造工程,2020(8):7-12,19. SONG Shouxu,WANG Zhiquan,YU Chen. Timing recognition of crankshaft predecisional remanufacturing based on online monitoring[J]. Modern Manufacturing Engineering,2020(8):7-12,19.