Journal of Mechanical Engineering

2016, Volume 52 Issue 7 Publication:05 April 2016
Previous Issue Next Issue
Thinking of the Development Strategy of Robots in China
GAO Feng, GUO Weizhong
机械工程学报. 2016, 52 (7): 1-5. doi: 10.3901/JME.2016.07.001
Abstract ( 1185 )    PDF(287KB) ( 1142 )
References | Related Articles | Metrics
Classification of Hand Gestures Based on Single-channel sEMG Decomposition
XIONG Anbin, DING Qichuan, ZHAO Xingang, HAN Jianda, LIU Guangjun
机械工程学报. 2016, 52 (7): 6-13. doi: 10.3901/JME.2016.07.006
Abstract ( 812 )    PDF(2451KB) ( 481 )
References | Related Articles | Metrics
Dynamic Analysis for the Cutting Electromechanical Transmission System in the Long-wall Shearer
LIU Changzhao, QIN Datong, LIAO Yinghua
机械工程学报. 2016, 52 (7): 14-22. doi: 10.3901/JME.2016.07.014
Abstract ( 794 )    PDF(2248KB) ( 396 )
References | Related Articles | Metrics
Kinematic Calibration Method of Robots Based on Quantum-behaved Particle Swarm Optimization
FANG Lijin, DANG Pengfei
机械工程学报. 2016, 52 (7): 23-30. doi: 10.3901/JME.2016.07.023
Abstract ( 933 )    PDF(417KB) ( 571 )
References | Related Articles | Metrics
Identification of the Drivers of Multi-DOF Kinematic Chains
WANG Ying, LI Ruiqin, ZHANG Yangang, WANG Limin
机械工程学报. 2016, 52 (7): 31-37. doi: 10.3901/JME.2016.07.031
Abstract ( 560 )    PDF(457KB) ( 227 )
References | Related Articles | Metrics
Covering Soil on Plastic-film Characteristics of Scraper Lifting Belt Mechanism
SUN Wei, LIU Xiaolong, SHI Linrong, ZHANG Hua, LIU Quanwei, WU Jianmin
机械工程学报. 2016, 52 (7): 38-45. doi: 10.3901/JME.2016.07.038
Abstract ( 466 )    PDF(1961KB) ( 341 )
References | Related Articles | Metrics
Mathematical Model of Planetary Gear Sets’ Vibration Signal and Characteristic Frequency Analysis
HUANG Yihong, DING Kang, HE Guolin
机械工程学报. 2016, 52 (7): 46-53. doi: 10.3901/JME.2016.07.046
Abstract ( 815 )    PDF(1000KB) ( 457 )
References | Related Articles | Metrics
Analysis of the Equivalent Surface Current Model for the Permanent Magnet Bearing by Using the Integral Definition
ZHANG Haibo, QIU Yujiang, JIANG Shuyun
机械工程学报. 2016, 52 (7): 54-59. doi: 10.3901/JME.2016.07.054
Abstract ( 584 )    PDF(821KB) ( 352 )
References | Related Articles | Metrics
Analysis of Friction Moment of Gyroscope Frame Bearing
JIANG Shaona, CHEN Xiaoyang, GU Jiaming, ZHANG Tao
机械工程学报. 2016, 52 (7): 60-68. doi: 10.3901/JME.2016.07.060
Abstract ( 702 )    PDF(976KB) ( 461 )
References | Related Articles | Metrics
Full Vector Envelope Technique Based on Complex Local Mean Decomposition and Its Application in Fault Feature Extraction for Rotor System
HUANG Chuanjin, MENG Yajun, LEI Wenping, HAN Jie
机械工程学报. 2016, 52 (7): 69-78. doi: 10.3901/JME.2016.07.069
Abstract ( 498 )    PDF(1406KB) ( 332 )
References | Related Articles | Metrics
Two-loop Implicit Integration Method Based on Backward Differential Formulation for Differential-algebraic Equations of Multibody System Dynamics
ZHANG Le, ZHANG Dingguo
机械工程学报. 2016, 52 (7): 79-87. doi: 10.3901/JME.2016.07.079
Abstract ( 550 )    PDF(1393KB) ( 309 )
References | Related Articles | Metrics
Analysis of Load Characteristics in Linear Bearing with Shaft Used in Space Environment for Rotary-linear Motion
GU Le, NIE Chongyang, ZHENG Dezhi, JIANG Shengyuan, SUN Jing, WANG Guoxin, YIN Zhongwang, YIN Can, LAI Xiaoming, WANG Dong
机械工程学报. 2016, 52 (7): 88-96. doi: 10.3901/JME.2016.07.088
Abstract ( 497 )    PDF(3495KB) ( 483 )
References | Related Articles | Metrics
A Calculation Model for Friction Torque of Ball Screws Considering the Influence of Reversers
WANG Heng, ZHANG Junjie, WANG Yongquan, CHEN Hualing
机械工程学报. 2016, 52 (7): 97-103. doi: 10.3901/JME.2016.07.097
Abstract ( 746 )    PDF(2880KB) ( 563 )
References | Related Articles | Metrics
On the Phase Transition Characteristic of Static Sealing Interface Based on Lattice Leakage Model
SHI Jiancheng, LIU Jianhua, YANG Zhimeng, GONG Hao
机械工程学报. 2016, 52 (7): 104-113. doi: 10.3901/JME.2016.07.104
Abstract ( 522 )    PDF(1511KB) ( 515 )
References | Related Articles | Metrics
Research on Fractal Contact Model for Contact Carrying Capacity of Two Cylinders’ Surfaces Considering Friction Factors
CHEN Qi, HUANG Shouwu, ZHANG Zhen, QIU Mingming
机械工程学报. 2016, 52 (7): 114-121. doi: 10.3901/JME.2016.07.114
Abstract ( 568 )    PDF(562KB) ( 514 )
References | Related Articles | Metrics
States and Prospects of Crack Arrest and Healing Technology
DENG Dewei, YU Jing, LIU Qianqian, YU Tao, ZHANG Hongchao
机械工程学报. 2016, 52 (7): 122-132. doi: 10.3901/JME.2016.07.122
Abstract ( 750 )    PDF(435KB) ( 409 )
Related Articles | Metrics
Theories and Design Methods for Proactive Remanufacturing of Modern Products
SONG Shouxu, LIU Ming, LIU Guangfu, KE Qingdi
机械工程学报. 2016, 52 (7): 133-141. doi: 10.3901/JME.2016.07.133
Abstract ( 671 )    PDF(1164KB) ( 370 )
References | Related Articles | Metrics
Material Removal Mathematics Model of Shear Thickening Polishing
LI Min, LÜ Binghai, YUAN Julong, DONG Chenchen, DAI Weitao
机械工程学报. 2016, 52 (7): 142-151. doi: 10.3901/JME.2016.07.142
Abstract ( 928 )    PDF(2631KB) ( 372 )
References | Related Articles | Metrics
A Novel Approach for Conceptual Structural Design of Complex Machine Elements
WANG Delun, SHEN Huipeng, SUN Yuan, DONG Huimin, MA Yali
机械工程学报. 2016, 52 (7): 152-163. doi: 10.3901/JME.2016.07.152
Abstract ( 783 )    PDF(1620KB) ( 1374 )
References | Related Articles | Metrics
Study on System Design Method of Firing Precision for Multiple Rocket Launcher
RUI Xiaoting, WANG Guoping, GU Junjie, ZHAO Youli, FU Changxu
机械工程学报. 2016, 52 (7): 164-177. doi: 10.3901/JME.2016.07.164
Abstract ( 524 )    PDF(3334KB) ( 379 )
References | Related Articles | Metrics
The Subdivision Algorithm of STL Model with Low Precision in Rapid Prototyping Process
ZHANG Zhengyan, CHEN Ping, YANG Li, HU Jiquan, CHEN Dingfang
机械工程学报. 2016, 52 (7): 178-186. doi: 10.3901/JME.2016.07.178
Abstract ( 500 )    PDF(1254KB) ( 355 )
References | Related Articles | Metrics
Tracing the Source of the Dynamic Error for Five-axis CNC Machine Tool Based on RTCP
JIANG Zhong, DING Jiexiong, WANG Wei, DENG Meng, DU Li, SONG Zhiyong
机械工程学报. 2016, 52 (7): 187-195. doi: 10.3901/JME.2016.07.187
Abstract ( 921 )    PDF(759KB) ( 758 )
References | Related Articles | Metrics
The Optimization of the Distribution of Source Points for the Fast Multipole Method of Fundamental Solutions Based on Genetic Algorithms
CHEN Changzheng, ZHANG Shiwei, ZHOU Bo
机械工程学报. 2016, 52 (7): 196-204. doi: 10.3901/JME.2016.07.196
Abstract ( 563 )    PDF(1623KB) ( 450 )
References | Related Articles | Metrics
Micro-contact Model of Bolted-joint Interface
LI Ling, CAI Anjiang, CAI Ligang, RUAN Xiaoguang
机械工程学报. 2016, 52 (7): 205-210. doi: 10.3901/JME.2016.07.205
Abstract ( 920 )    PDF(334KB) ( 623 )
References | Related Articles | Metrics