Journal of Mechanical Engineering

2016, Volume 52 Issue 6 Publication:15 March 2016
Previous Issue Next Issue
Ultrasonic Phased Array Post-processing Imaging Techniques：A Review
ZHOU Zhenggan, LI Yang, ZHOU Wenbin
机械工程学报. 2016, 52 (6): 1-11. doi: 10.3901/JME.2016.06.001
Abstract ( 955 )    PDF(617KB) ( 1132 )
References | Related Articles | Metrics
Review of Modeling Method and Optimum Design of EMAT Transmitters Based on Lorentz Principle
SUN Feiran, SUN Zhenguo, ZHANG Wenzeng, CHEN Qiang
机械工程学报. 2016, 52 (6): 12-21. doi: 10.3901/JME.2016.06.012
Abstract ( 861 )    PDF(565KB) ( 275 )
References | Related Articles | Metrics
Research on Nonlinear Ultrasonic Properties of Tension Stress in Metal Materials
YAN Hongjuan, XU Chunguang, XIAO Dingguo, CAI Haichao
机械工程学报. 2016, 52 (6): 22-29. doi: 10.3901/JME.2016.06.022
Abstract ( 656 )    PDF(5436KB) ( 293 )
References | Related Articles | Metrics
Lamb Wave Tomography Technique for Crack Damage Detection
WANG Qiang, XU Jing, WANG Mengxin, SONG Chunxiao
机械工程学报. 2016, 52 (6): 30-36. doi: 10.3901/JME.2016.06.030
Abstract ( 874 )    PDF(447KB) ( 341 )
References | Related Articles | Metrics
Progress on Effect of Processes and Microelements on Liquation Cracking of Weld Heat-affected Zone of Nickel-based Alloy
LI Zhuoxin, WANG Heng, LI Yang, KIM Hee Jin, TILLMANN Wolfgang
机械工程学报. 2016, 52 (6): 37-45. doi: 10.3901/JME.2016.06.037
Abstract ( 712 )    PDF(364KB) ( 334 )
References | Related Articles | Metrics
Deformation Behavior of TRIP590 Advanced High Strength Steel under Biaxial Loading
WANG Haibo, WAN Min, LI Qiang, WU Xiangdong, ZHAI Jing
机械工程学报. 2016, 52 (6): 46-58. doi: 10.3901/JME.2016.06.046
Abstract ( 683 )    PDF(3097KB) ( 253 )
References | Related Articles | Metrics
Influence of Arcs Interaction on TIG-MIG Hybrid Welding Process
CHEN Ji, ZONG Ran, WU Chuansong, CHEN Maoai
机械工程学报. 2016, 52 (6): 59-64. doi: 10.3901/JME.2016.06.059
Abstract ( 669 )    PDF(1958KB) ( 310 )
References | Related Articles | Metrics
Precise Method for Testing Cooling Curve and Eutectic Expansion Curve of Ductile Cast Iron in Front of Furnace
XU Zhenyu, LI Dayong, MA Xuliang, SHI Dequan, WANG Yanfeng
机械工程学报. 2016, 52 (6): 65-71. doi: 10.3901/JME.2016.06.065
Abstract ( 484 )    PDF(2342KB) ( 306 )
References | Related Articles | Metrics
Simulation of the Rolling Wear of Work Roll Surface Asperities during Strip Cold Rolling by Discrete Element Method
ZHANG Qingdong, ZHANG Yong, LI Rui, ZHANG Boyang
机械工程学报. 2016, 52 (6): 72-78. doi: 10.3901/JME.2016.06.072
Abstract ( 482 )    PDF(4339KB) ( 302 )
References | Related Articles | Metrics
Investigation on the Mild to Severe Wear Transition for AZ System Magnesium Alloys
AN Dongqi, XIAO Hongwei, LI Dongcheng, WEN Zi
机械工程学报. 2016, 52 (6): 79-85. doi: 10.3901/JME.2016.06.079
Abstract ( 618 )    PDF(3844KB) ( 310 )
References | Related Articles | Metrics
Bond Reliability under High Temperature and Humid Environment for Copper Bonding Wire
CAO Jun, FAN Junling, SHANG Xianguang, LIU Zhiqiang
机械工程学报. 2016, 52 (6): 86-91. doi: 10.3901/JME.2016.06.086
Abstract ( 637 )    PDF(1367KB) ( 225 )
References | Related Articles | Metrics
Study on the Performance of YunXi Environment Friendly Molding Sand
ZHU Shigen, TAO Liyang, LUO Yilan, DING Hao
机械工程学报. 2016, 52 (6): 92-98. doi: 10.3901/JME.2016.06.092
Abstract ( 523 )    PDF(4086KB) ( 342 )
References | Related Articles | Metrics
Coordinated Control Strategy of EPS and ESP Based on Vehicle Driving Safe Boundary
WANG Qidong, WANG Jinbo, CHEN Wuwei, HUANG He
机械工程学报. 2016, 52 (6): 99-107. doi: 10.3901/JME.2016.06.099
Abstract ( 652 )    PDF(830KB) ( 478 )
References | Related Articles | Metrics
Study on the Unsteady Aerodynamic Loads of High-speed Trains Exposed to Two-dimensional Stochastic Winds
YU Mengge, LIU Dawei, ZHANG Jiye, CHEN Huanming
机械工程学报. 2016, 52 (6): 108-115. doi: 10.3901/JME.2016.06.108
Abstract ( 553 )    PDF(922KB) ( 194 )
References | Related Articles | Metrics
Research on the Control of Steering of the Separated Overloaded Vehicles under Complex Mine Environment
GUO Rui, NING Chao, ZHAO Jingyi, ZHANG Zhenmiao, BU Dan
机械工程学报. 2016, 52 (6): 116-123. doi: 10.3901/JME.2016.06.116
Abstract ( 552 )    PDF(5816KB) ( 357 )
References | Related Articles | Metrics
Unsteady Aerodynamic Characteristics and Safety of High-speed Trains under Crosswinds
ZHANG Liang, ZHANG Jiye, LI Tian, ZHANG Yadong, YIN Zhonghui
机械工程学报. 2016, 52 (6): 124-135. doi: 10.3901/JME.2016.06.124
Abstract ( 622 )    PDF(1946KB) ( 329 )
References | Related Articles | Metrics
Downhill Assist Control Method for Hybrid Electric Vehicle
HAN Yunwu, LUO Yugong, LI Keqiang, CHEN Long
机械工程学报. 2016, 52 (6): 136-144. doi: 10.3901/JME.2016.06.136
Abstract ( 622 )    PDF(653KB) ( 221 )
References | Related Articles | Metrics
Analysis of Lightweight Composite Body Structure for Electrical Vehicle Using the Multiscale Approach
ZHU Guohua, CHENG Aiguo, WANG Zhen, LEI Fagui
机械工程学报. 2016, 52 (6): 145-152. doi: 10.3901/JME.2016.06.145
Abstract ( 713 )    PDF(2832KB) ( 367 )
References | Related Articles | Metrics
Research on Dynamic Characteristics of the Tandem Suspension Leaf Spring
DUAN Liang, YANG Shukai, SONG Chuanxue, FAN Shiqi, LU Bingwu
机械工程学报. 2016, 52 (6): 153-158. doi: 10.3901/JME.2016.06.153
Abstract ( 734 )    PDF(531KB) ( 316 )
References | Related Articles | Metrics
Temperature Soft-sensing of Cement Clinker in Grate Cooler
WANG Meiqi, LIU Bin, WEN Yan, LIU Haoran
机械工程学报. 2016, 52 (6): 159-165. doi: 10.3901/JME.2016.06.159
Abstract ( 646 )    PDF(2974KB) ( 180 )
References | Related Articles | Metrics
Research on 3D Temperature Field in Biological Tissue Based on Adaptive Simulated Annealing Algorithm
SHI Guilian, LI Kaiyang, YE Fuli
机械工程学报. 2016, 52 (6): 166-173. doi: 10.3901/JME.2016.06.166
Abstract ( 462 )    PDF(3184KB) ( 314 )
References | Related Articles | Metrics
A Numerical Simulation Method of Transient Thermal Contact Conductance
LI Leitao, ZHENG Xiaoya
机械工程学报. 2016, 52 (6): 174-180. doi: 10.3901/JME.2016.06.174
Abstract ( 634 )    PDF(1042KB) ( 586 )
References | Related Articles | Metrics
Research on Aerodynamic Characteristic of Φ Type Wind Turbine Affected by Interference Air
ZHAO Zhenzhou, CHEN Jingru, WANG Tongguang, LI Tao, ZHENG Yuan
机械工程学报. 2016, 52 (6): 181-187. doi: 10.3901/JME.2016.06.181
Abstract ( 551 )    PDF(459KB) ( 256 )
References | Related Articles | Metrics
Research on the Characteristics of Asymmetric Pump Directed Controlled Arm Cylinder of Excavator
JING Jian, QUAN Long, HUANG Jiahai, ZHAO Bin
机械工程学报. 2016, 52 (6): 188-196. doi: 10.3901/JME.2016.06.188
Abstract ( 846 )    PDF(1024KB) ( 391 )
References | Related Articles | Metrics
Multi-state System Reliability Modeling and Optimization with Considering Dynamic Load Distribution Mechanism
LIU Yu, LI Xiangyu, ZHANG Xiaohu
机械工程学报. 2016, 52 (6): 197-205. doi: 10.3901/JME.2016.06.197
Abstract ( 695 )    PDF(570KB) ( 315 )
References | Related Articles | Metrics
Fatigue Probability Evaluation Method Based on the Principle of Sample-polymerization
BAI Xin, XIE Liyang, QIAN Wenxue
机械工程学报. 2016, 52 (6): 206-210. doi: 10.3901/JME.2016.06.206
Abstract ( 592 )    PDF(573KB) ( 408 )
References | Related Articles | Metrics