Journal of Mechanical Engineering

2016, Volume 52 Issue 8 Publication:15 April 2016
Previous Issue Next Issue
Modal Analysis of Stator for Motor System with Large Distributed Magnetic Bearings
ZHANG Xianbiao, WANG Dong, SU Zhenzhong
机械工程学报. 2016, 52 (8): 1-7. doi: 10.3901/JME.2016.08.001
Abstract ( 723 )    PDF(2360KB) ( 333 )
References | Related Articles | Metrics
Research on 3D Air-gap Magnetic Field of Field Modulated Asynchronous Magnetic Couplings
YANG Chaojun, KONG Lingying, ZHANG Tao, LÜ Lei, LUO Yongxin, CHEN Zhipeng
机械工程学报. 2016, 52 (8): 8-15. doi: 10.3901/JME.2016.08.008
Abstract ( 695 )    PDF(10366KB) ( 291 )
References | Related Articles | Metrics
Model Measurement and Identification of Flexible Rotor Suspended by Electromagnetic Bearing
SUN Zhe, ZHAO Jingjing, SHI Zhengang
机械工程学报. 2016, 52 (8): 16-22. doi: 10.3901/JME.2016.08.016
Abstract ( 547 )    PDF(434KB) ( 218 )
References | Related Articles | Metrics
Research on Characteristics of Permanent Magnet Eddy-current Coupling Drive
HE Fujun, ZHONG Yuhai, ZHANG Ruijie, SONG Xuemei
机械工程学报. 2016, 52 (8): 23-28. doi: 10.3901/JME.2016.08.023
Abstract ( 602 )    PDF(3003KB) ( 231 )
References | Related Articles | Metrics
Dynamic Parametric Modeling and Identification of Magnetorheological Fluid Engine Mounts
CHEN Shiwei, DU Pengfei, LI Rui, WANG Xiaorong
机械工程学报. 2016, 52 (8): 29-35. doi: 10.3901/JME.2016.08.029
Abstract ( 831 )    PDF(747KB) ( 237 )
References | Related Articles | Metrics
Vibration Control by AMBs for Composite Material Energy Storage Flywheel with Flexible Structure
BAI Jingang, ZHAO Lei, ZHANG Kai, DAI Xingjian
机械工程学报. 2016, 52 (8): 36-42. doi: 10.3901/JME.2016.08.036
Abstract ( 626 )    PDF(1371KB) ( 211 )
References | Related Articles | Metrics
Nonlinear Ultrasonic Resonance Technique and Application in Scale Detection
JIAO Jingpin, WU Chao, MENG Xiangji, WU Bin, HE Cunfu
机械工程学报. 2016, 52 (8): 43-50. doi: 10.3901/JME.2016.08.043
Abstract ( 713 )    PDF(985KB) ( 420 )
References | Related Articles | Metrics
Ultrasonic Inspection for Creep in P91 Steel Weldments Based on Non-creep Feature Space Projection
YUAN Keyi, HAN Zandong, CHEN Yifang, ZHONG Yuexian
机械工程学报. 2016, 52 (8): 51-57. doi: 10.3901/JME.2016.08.051
Abstract ( 555 )    PDF(903KB) ( 219 )
References | Related Articles | Metrics
Fault-tolerant Measurement Mechanism and Calibration Experimental Study of Pre-stressed Parallel Six-axis Force Sensor
YAO Jiantao, CUI Pengxiao, ZHU Jialong, XU Yundou, ZHAO Yongsheng
机械工程学报. 2016, 52 (8): 58-66. doi: 10.3901/JME.2016.08.058
Abstract ( 562 )    PDF(1906KB) ( 183 )
References | Related Articles | Metrics
Review of Performance Gradient Distribution Hot Forming Technology
PENG Yan, LIU Caiyi, HAO Luhan, XING Pengda
机械工程学报. 2016, 52 (8): 67-75. doi: 10.3901/JME.2016.08.067
Abstract ( 547 )    PDF(1549KB) ( 279 )
References | Related Articles | Metrics
Progress on the Standard Test Technology of Quasistatic Fracture Toughness for Metallic Materials
BAO Chen, CAI Lixun, SHI Kaikai, DAN Chen, YAO Yao
机械工程学报. 2016, 52 (8): 76-89. doi: 10.3901/JME.2016.08.076
Abstract ( 714 )    PDF(938KB) ( 234 )
References | Related Articles | Metrics
Research on Rotatory Deformation Uniformity and Compaction Effect of Super-heavy Hollow Steel Ingot
LIU Min, MA Qingxian, LIU Gongmei
机械工程学报. 2016, 52 (8): 90-96. doi: 10.3901/JME.2016.08.090
Abstract ( 528 )    PDF(10833KB) ( 187 )
References | Related Articles | Metrics
Procedure Analysis of Friction Hydro Pillar Processing
QU Rui, YANG Lijun, TIAN Lifeng, XU Wei, CUI Lei, YIN Yayun
机械工程学报. 2016, 52 (8): 97-103. doi: 10.3901/JME.2016.08.097
Abstract ( 518 )    PDF(6431KB) ( 219 )
References | Related Articles | Metrics
High Temperature Corrosion Behaviors of HR3C Steel Pre-coated Na₂SO₄-25%NaCl Salt Film
LI Ping, QIN Peng, ZHAO Jie, LI Tingju, PANG Shengjiao
机械工程学报. 2016, 52 (8): 104-111. doi: 10.3901/JME.2016.08.104
Abstract ( 543 )    PDF(1354KB) ( 188 )
References | Related Articles | Metrics
Micro-texture and Mechanical Properties of 25Mn Large-scale Ring Based on Casting-rolling Forming Technology
QIN Fangcheng, LI Yongtang
机械工程学报. 2016, 52 (8): 112-118. doi: 10.3901/JME.2016.08.112
Abstract ( 457 )    PDF(6088KB) ( 184 )
References | Related Articles | Metrics
Influence of Propane Pressure on Microstructure and Properties of Supersonic Particles Deposition Aluminum Bronze Coatings
ZHU Sheng, ZHOU Chaoji, WANG Xiaoming, ZHANG Yao, HAN Bingyuan
机械工程学报. 2016, 52 (8): 119-124. doi: 10.3901/JME.2016.08.119
Abstract ( 498 )    PDF(930KB) ( 187 )
References | Related Articles | Metrics
Research on Strain Hardening Behavior of Light-weight Fe-24Mn-7Al-1C Cast Wear Resistant Steel for Lining Plates
PENG Shiguang, SONG Renbo, TAN Zhidong, WANG Zhonghong, GUO Ke, GAO Jingjun
机械工程学报. 2016, 52 (8): 125-132. doi: 10.3901/JME.2016.08.125
Abstract ( 456 )    PDF(13477KB) ( 366 )
References | Related Articles | Metrics
Research on Non-smooth Surfaces for Control of the Automobile Trailing Vortex Structure
YANG Yi, HUANG Jianfeng, FAN Guanghui, CAI Shengkang, LIU Zheng
机械工程学报. 2016, 52 (8): 133-140. doi: 10.3901/JME.2016.08.133
Abstract ( 612 )    PDF(5784KB) ( 242 )
References | Related Articles | Metrics
Simulation and Experiment on Temperature Field of Lithium-ion Power Battery for Vehicle Based on Characteristic of Dynamic Heat Source
LIU Feifei, LAN Fengchong, CHEN Jiqing
机械工程学报. 2016, 52 (8): 141-151. doi: 10.3901/JME.2016.08.141
Abstract ( 822 )    PDF(3803KB) ( 449 )
References | Related Articles | Metrics
Investigation into Aerodynamic Noise Characteristics of Train Head Car Bogie Based on Simplified Models
LI Hui, XIAO Xinbiao, JIN Xuesong
机械工程学报. 2016, 52 (8): 152-161. doi: 10.3901/JME.2016.08.152
Abstract ( 451 )    PDF(2611KB) ( 615 )
References | Related Articles | Metrics
Management Strategy of Hybrid Electrical Vehicle Based on Driving Style Recognition
QIN Datong, ZHAN Sen, ZENG Yuping, SU Ling
机械工程学报. 2016, 52 (8): 162-169. doi: 10.3901/JME.2016.08.162
Abstract ( 1131 )    PDF(1128KB) ( 486 )
References | Related Articles | Metrics
Lighting Glare Evaluation Method for the Driving Interface Design of High-speed Train
ZHAN Zixiang, GUO Beiyuan, FANG Weining
机械工程学报. 2016, 52 (8): 170-178. doi: 10.3901/JME.2016.08.170
Abstract ( 624 )    PDF(1933KB) ( 333 )
References | Related Articles | Metrics
Constant Speed Control Method of Variable Speed Input Fixed Displacement Pump-constant Speed Output Variable Motor System
KONG Xiangdong, SONG Yu, AI Chao
机械工程学报. 2016, 52 (8): 179-190. doi: 10.3901/JME.2016.08.179
Abstract ( 586 )    PDF(1832KB) ( 254 )
References | Related Articles | Metrics
Online Measurement of Gas and Liquid Flow Rate in Wet Gas Base on Single V-cone Throttle
HE Denghui, ZHANG Feng, CAO Honggui, YANG Yuanyuan, BAI Bofeng
机械工程学报. 2016, 52 (8): 191-197. doi: 10.3901/JME.2016.08.191
Abstract ( 554 )    PDF(622KB) ( 289 )
References | Related Articles | Metrics
Study of Aerodynamic Performance of an Air Compressor Model Stage Used for Different Real Gases
LIU Yan, TAO Lihua, WANG Jian, WANG Hailun, SUN Yuying
机械工程学报. 2016, 52 (8): 198-206. doi: 10.3901/JME.2016.08.198
Abstract ( 569 )    PDF(1085KB) ( 410 )
References | Related Articles | Metrics
Closed-loop Control Strategy of Segmented Cooling in Hot Rolling of Aluminum Alloys
GAO Shanfeng, XI Anmin, YANG Xian
机械工程学报. 2016, 52 (8): 207-210. doi: 10.3901/JME.2016.08.207
Abstract ( 538 )    PDF(827KB) ( 219 )
References | Related Articles | Metrics