Journal of Mechanical Engineering

2016, Volume 52 Issue 9 Publication:05 May 2016
Previous Issue Next Issue
Design and Analysis of a Wire-Dirven Parallel Mechanism for Large Vertical Storage Tank
WANG Weifang¹, TANG Xiaoqiang^{1, 2}, SHAO Zhufeng^{1, 2}
机械工程学报. 2016, 52 (9): 1-8. doi: 10.3901/JME.2016.09.001
Abstract ( 815 )    PDF(2034KB) ( 428 )
References | Related Articles | Metrics
Design and Motion Mechanism of a Screw Drive In-pipe Robot with Adaptability to In-pipe Environment
LI Te^{1, 2}, MA Shugen^{1, 3}, LI Bin¹, WANG Minghui¹, WANG Yuechao¹
机械工程学报. 2016, 52 (9): 9-17. doi: 10.3901/JME.2016.09.009
Abstract ( 732 )    PDF(4324KB) ( 388 )
References | Related Articles | Metrics
Dynamic Analysis of A New Forging Manipulator’s Main Motion Mechanism Based on the Principle of Virtual Work
DING Huafeng^{1, 2, 3}, ZU Qi¹, FENG Zemin^{2, 3}
机械工程学报. 2016, 52 (9): 18-27. doi: 10.3901/JME.2016.09.018
Abstract ( 742 )    PDF(645KB) ( 323 )
References | Related Articles | Metrics
Testing Research on Dynamic Load Sharing Performance of Encased Differential Planetary Gearbox
TAN Yuanqiang^{1, 2}, HU Congfang^{1, 2}, ZHANG Yuechun³, WANG Wen³, XIONG Shun³, ZUO Huang³
机械工程学报. 2016, 52 (9): 28-35. doi: 10.3901/JME.2016.09.028
Abstract ( 670 )    PDF(1273KB) ( 434 )
References | Related Articles | Metrics
Simplified Jacobian Analysis for Parallel Robots with Regular Limbs
BU Wanghui, ZHENG Yuxin, ZHANG Pan, HUA Binbin
机械工程学报. 2016, 52 (9): 36-41. doi: 10.3901/JME.2016.09.036
Abstract ( 1133 )    PDF(322KB) ( 268 )
References | Related Articles | Metrics
Engagement Normal Force and Elastic Backlash of Precision Ball Transmission
AN Zijun, YANG Ronggang, YI Yali
机械工程学报. 2016, 52 (9): 42-48. doi: 10.3901/JME.2016.09.042
Abstract ( 622 )    PDF(418KB) ( 250 )
References | Related Articles | Metrics
Research on Dynamic Coupling Characteristic of Rootless Underactuated Redundant Robots
LI Na¹, ZHAO Tieshi², JIANG Haiyong¹, WANG Jiazhong¹
机械工程学报. 2016, 52 (9): 49-55. doi: 10.3901/JME.2016.09.049
Abstract ( 745 )    PDF(1288KB) ( 338 )
References | Related Articles | Metrics
Neural Network Based Multi-objective Active Vibration Optimization Method for Shell Structure
ZHANG Xingwu^{1, 2}, LIU Jinxin^{1, 2}, CHEN Xuefeng^{1, 2}, CAO Hongrui^{1, 2}
机械工程学报. 2016, 52 (9): 56-64. doi: 10.3901/JME.2016.09.056
Abstract ( 915 )    PDF(3307KB) ( 428 )
References | Related Articles | Metrics
Induction Motor Fault Diagnosis Based on Deep Neural Network of Sparse Auto-encoder
SUN Wenjun, SHAO Siyu, YAN Ruqiang
机械工程学报. 2016, 52 (9): 65-71. doi: 10.3901/JME.2016.09.065
Abstract ( 1171 )    PDF(958KB) ( 1046 )
References | Related Articles | Metrics
Precise Manufacturing of Functional Parameters of Advancing Wind-tunnel Flutter Model
YAN Zibin¹, YANG Rui¹, SUN Shiyong¹, QIAN Wei², GUO Dongming¹
机械工程学报. 2016, 52 (9): 72-78. doi: 10.3901/JME.2016.09.072
Abstract ( 571 )    PDF(708KB) ( 360 )
Related Articles | Metrics
Considering the Requirements of Static Strength for the Rotating Straight Blade Similar Experimental Model Design Method
LUO Zhong¹, GUO Jian², ZHU Yunpeng³, HAN Qingkai⁴, WANG Deyou⁵
机械工程学报. 2016, 52 (9): 79-85. doi: 10.3901/JME.2016.09.079
Abstract ( 460 )    PDF(481KB) ( 221 )
References | Related Articles | Metrics
Inverse Substructuring Methods for Identifying Coupling Dynamic Stiffness of Mechanical Assembly
LÜ Guangqing¹, YI Chuijie², FANG Ke¹
机械工程学报. 2016, 52 (9): 86-95. doi: 10.3901/JME.2016.09.086
Abstract ( 568 )    PDF(1828KB) ( 334 )
References | Related Articles | Metrics
Bounce Performance Study on Novel Multi-mode Elastic Actuator
HAN Yali^{1, 2}, HAO Dabin², YU Jianming², QI Bing², SONG Aiguo¹, ZHU Songqing²
机械工程学报. 2016, 52 (9): 96-104. doi: 10.3901/JME.2016.09.096
Abstract ( 532 )    PDF(3720KB) ( 261 )
References | Related Articles | Metrics
Influence of Dynamic Load on the Mechanical and Electrical Performance of Structurally Integrated Antenna
ZHOU Jinzhu^{1, 2}, SONG Liwei¹, DU Leigang¹, GUO Donglai¹
机械工程学报. 2016, 52 (9): 105-115. doi: 10.3901/JME.2016.09.105
Abstract ( 513 )    PDF(2809KB) ( 426 )
References | Related Articles | Metrics
Static and Dynamic Characteristics of Aerostatic Bearing Based on Numerical Simulation
CUI Hailong, YUE Xiaobin, ZHANG Lianxin, XIA Huan, LEI Dajiang
机械工程学报. 2016, 52 (9): 116-121. doi: 10.3901/JME.2016.09.116
Abstract ( 1103 )    PDF(1732KB) ( 518 )
References | Related Articles | Metrics
Self-adaptive Algorithm of the Equivalent Resistance on the Boundary Line in One-step Inverse Analysis
CUI Jing, BAO Yidong
机械工程学报. 2016, 52 (9): 122-128. doi: 10.3901/JME.2016.09.122
Abstract ( 615 )    PDF(689KB) ( 221 )
References | Related Articles | Metrics
Research on Measures to Technical Realization of Multi Biological Effects
LIU Wei^{1, 2}, CAO Guozhong^{1, 2}, TAN Runhua^{1, 2}, YU Fei^{1, 2}
机械工程学报. 2016, 52 (9): 129-141. doi: 10.3901/JME.2016.09.129
Abstract ( 546 )    PDF(1492KB) ( 257 )
References | Related Articles | Metrics
A Hybrid Algorithm with a New Neighborhood Structure for the Job Shop Scheduling Problem
ZHAO Shikui
机械工程学报. 2016, 52 (9): 141-151. doi: 10.3901/JME.2016.09.141
Abstract ( 731 )    PDF(633KB) ( 462 )
References | Related Articles | Metrics
Energy Equivalent Static Load Method Based on Critical Time Point and Structure Dynamic Response Optimization
ZHANG Yangang, MAO Huping, SU Tiexiong, GUO Zhiming, LI Kun
机械工程学报. 2016, 52 (9): 151-157. doi: 10.3901/JME.2016.09.151
Abstract ( 646 )    PDF(1366KB) ( 272 )
References | Related Articles | Metrics
Design of the Optical Fiber Embedded Structure in PCB-Level Circuit Based on the Fracture Mechanism
CHENG Lei¹, ZHOU Dejian², WU Zhaohua²
机械工程学报. 2016, 52 (9): 158-165. doi: 10.3901/JME.2016.09.158
Abstract ( 648 )    PDF(824KB) ( 334 )
References | Related Articles | Metrics
Research Summary on Precision Grinding Technology Oriented to Achieve High Process Efficiency for Large and Middle-scale Optic
JIN Tan, LI Ping, XIAO Hang, WU Yao
机械工程学报. 2016, 52 (9): 165-375. doi: 10.3901/JME.2016.09.165
Abstract ( 623 )    PDF(1624KB) ( 516 )
References | Related Articles | Metrics
The Model of Spatial Forming with Multi-cutting-edge for Cylindrical Gear Hobbing and Its Application
CHEN Yongpeng¹, CAO Huajun¹, LI Xianguang², CHEN Peng²
机械工程学报. 2016, 52 (9): 176-183. doi: 10.3901/JME.2016.09.176
Abstract ( 687 )    PDF(2128KB) ( 276 )
References | Related Articles | Metrics
Cutting Force Modeling in End Milling of Curved Geometries Based on Oblique Cutting Process
LUO Zhiwen, ZHAO Wenxiang, JIAO Li, GAO Shoufeng, LIU Zhibing, YAN Pei, WANG Xibin
机械工程学报. 2016, 52 (9): 184-192. doi: 10.3901/JME.2016.09.184
Abstract ( 566 )    PDF(7119KB) ( 342 )
References | Related Articles | Metrics
Modeling and Experimental Investigations on Point Grinding Force for Novel Point Grinding Wheel
YIN Guoqiang, GONG Yadong, WEN Xuelong, ZHANG Yikuo, CHENG Jun
机械工程学报. 2016, 52 (9): 193-200. doi: 10.3901/JME.2016.09.193
Abstract ( 624 )    PDF(1876KB) ( 352 )
References | Related Articles | Metrics
Development of Arc-edge Tool Lapping Machine for Grating Ruling Based on Leverage Load Mode
Jirigalantu, LI Xiaotian, LIU Kai, ZHANG Shanwen, Bayanheshig, QI Xiangdong, TANG Yuguo
机械工程学报. 2016, 52 (9): 201-207. doi: 10.3901/JME.2016.09.201
Abstract ( 512 )    PDF(1657KB) ( 360 )
References | Related Articles | Metrics
Single Pulse Discharge Channel Expansion Laws of EDM
CHANG Weijie¹, CHEN Yuanlong¹, ZHANG Jianhua², XU Bin³, FANG Ming¹
机械工程学报. 2016, 52 (9): 208-212. doi: 10.3901/JME.2016.09.208
Abstract ( 556 )    PDF(1006KB) ( 256 )
References | Related Articles | Metrics