形状记忆合金驱动的可变翼梢小翼设计与验证

doi:10.3901/JME.2022.17.049

机械工程学报 ›› 2022, Vol. 58 ›› Issue (17): 49-57.doi: 10.3901/JME.2022.17.049

• 特邀专栏:先进机电装备可靠性与智能化 • 上一篇下一篇

扫码分享

形状记忆合金驱动的可变翼梢小翼设计与验证

谷小军^1,2,3, 周炳楠¹, 王文龙^2,3, 杨建楠^2,3, 朱继宏^1,2,3, 张卫红^2,3

1. 西北工业大学无人系统技术研究院西安 710012;
2. 西北工业大学航宇材料结构一体化设计与增材制造装备技术国际联合研究中心西安 710012;
3. 西北工业大学金属高性能增材制造与创新设计工信部重点实验室西安 710012

收稿日期:2021-08-30 修回日期:2022-05-18 发布日期:2022-11-07
作者简介:谷小军,男,博士,副教授。主要研究方向为智能材料与结构、飞行器结构优化设计。

Design and Assessment of Variable Winglet Driven by Shape Memory Alloy

GU Xiaojun^1,2,3, ZHOU Bingnan¹, WANG Wenlong^2,3, YANG Jiannan^2,3, ZHU Jihong^1,2,3, ZHANG Weihong^2,3

1. Unmanned System Research Institute, Northwestern Polytechnical University, Xi'an 710072;
2. State IJR Center of Aerospace Design and Additive Manufacturing, Northwestern Polytechnical University, Xi'an 710072;
3. MIIT Lab of Metal Additive Manufacturing and Innovative Design, Northwestern Polytechnical University, Xi'an 710072

Received:2021-08-30 Revised:2022-05-18 Published:2022-11-07
Contact: 国家自然科学基金(51790171, 51761145111, 51735005, 11722219)资助项目。

摘要/Abstract

摘要： 智能材料如形状记忆合金、压电材料、磁致伸缩材料等，可将驱动、承载、变形、传感集于一体，可作为驱动结构代替传统复杂作动机构，显著提高系统的紧凑性。为满足现有航空航天变体结构的实际需求，设计并验证了一种形状记忆合金(Shape memory alloy, SMA)驱动的可变翼梢小翼。基于开发的三维SMA本构模型，对SMA杆件驱动的翼梢小翼变形过程进行了数值仿真，并分析了不同SMA杆型对翼梢小翼变形能力的影响。结合增材制造技术，对设计出的变形翼梢小翼进行样机制作。进行了单次变弯、往复变弯试验验证，并与数值仿真结果进行分析对比。结果表明，试验测得变形数据和仿真结果吻合良好，设计出的变形翼梢小翼具有较好的变形能力和效果。最后分析了SMA杆冷却速度对变形能力的影响，评估了翼梢小翼变形过程中出现蒙皮屈曲的原因并提出了后续研究方案。

关键词: 变形翼梢小翼, 变体结构, 形状记忆合金, 数值仿真

Abstract: Intelligent materials such as shape memory alloy, piezoelectric material and magnetostriction material have the functions of driving, bearing, transshaping and sensing. They can take the place of traditional actuators to significantly improve the compactness of the system. In order to meet the actual needs of morphing aircrafts, a variable winglet driven by the shape memory alloy (SMA) is designed and assessed. Based on the developed three-dimensional SMA constitutive model, and simulated the deformation process of the variable winglet driven by SMA rods and analyzed the influence of different SMA rod types on the deformation ability of the winglet. Combined with additive manufacturing technology, a prototype of the designed variable winglet is manufactured. single bending and repeated bending test were carried out. The results showed that the deformation data and the simulation results are in good agreement, and the designed variable winglet has good deformation ability and effect. Finally, the influence of the cooling rate of the SMA rods on the deformation ability of winglet was analyzed, the reason for the skin buckling during the deformation was evaluated and the follow-up research plan was proposed.

Key words: variable winglet, morphing structure, shape memory alloy, numerical simulation

中图分类号:

V241

谷小军, 周炳楠, 王文龙, 杨建楠, 朱继宏, 张卫红. 形状记忆合金驱动的可变翼梢小翼设计与验证[J]. 机械工程学报, 2022, 58(17): 49-57.

GU Xiaojun, ZHOU Bingnan, WANG Wenlong, YANG Jiannan, ZHU Jihong, ZHANG Weihong. Design and Assessment of Variable Winglet Driven by Shape Memory Alloy[J]. Journal of Mechanical Engineering, 2022, 58(17): 49-57.

导出引用管理器 EndNote|Reference Manager|ProCite|BibTeX|RefWorks

链接本文: http://www.cjmenet.com.cn/CN/10.3901/JME.2022.17.049

http://www.cjmenet.com.cn/CN/Y2022/V58/I17/49

参考文献

[1] 王晓宏. 形状记忆合金驱动主动变形结构的设计与制作[D]. 哈尔滨：哈尔滨工业大学，2006. WANG Xiaohong. The design and fabrication of initiative distortion structure driven by shape memory alloys[D]. Harbin：Harbin Institute of Technology，2006.
[2] ZAKI W，MOUMNI Z. A three-dimensional model of the thermomechanical behavior of shape memory alloys[J]. Journal of the Mechanics and Physics of Solids，2007，55(11)：2455-2490.
[3] MOUMNI Z，ZAKI W，MAITOURNAM H. Cyclic behavior and energy approach to the fatigue of shape memory alloys[J]. Journal of Mechanics of Materials and Structures，2009，4(2)：395-411.
[4] GU X，ZAKI，MORIN C，et al. Time integration and assessment of a model for shape memory alloys considering multiaxial nonproportional loading cases[J]. International Journal of Solids and Structures，2015，54：82-99.
[5] GU X. Optimization of shape memory alloy structures with respect to fatigue[D]. Paris：Paris Saclay，2017.
[6] MAUGIN G A. The thermomechanics of plasticity and fracture[M]. Cambridge University Press，1992.
[7] 裘进浩，边义祥，季宏丽，等. 智能材料结构在航空领域中的应用[J]. 航空制造技术，2009(3)：26-29. QIU Jinhao，BIAN Yixiang，JI Hongli，et al. Application of smart materials and structures in aviation industry[J]. Aeronautical Manufacturing Technology，2009(3)：26-29.
[8] KUDVA J N，SANDERS B P，PINKERTON- FLORANCE J L，et al. DARPA/AFRL/NASA Smart Wing program：Final overview[C]// Smart Structures and Materials 2002： Industrial and Commercial Applications of Smart Structures Technologies. International Society for Optics and Photonics，2002，4698：37-43.
[9] MARTIN C A，KUDVA J N，AUSTIN F，et al. Smart materials and structures–smart wing phase 1 final report[J]. Wright Patterson AFB (OH)：Air Vehicles Directorate，Air Force Research Laboratory，Air Force Material Command，1998(12)：26-38.
[10] BARTLEY-CHO J D，WANG D P，MARTIN C A，et al. Development of high-rate，adaptive trailing edge control surface for the smart wing phase 2 wind tunnel model[J]. Journal of Intelligent Material Systems and Structures，2004，15(4)：279-291.

[1]	李子轩, 李泓吉, 徐志祥, 牛辉, 季策, 王涛. 碳钢/不锈钢双金属管三辊波纹斜轧复合成形机理研究[J]. 机械工程学报, 2026, 62(6): 174-184.
[2]	曾祥栩, 李昭青, 张争艳, 李宜朋, 林坤, 杨潇. 工艺参数对激光选区熔化Ni-Ti合金微观组织和宏观性能的影响[J]. 机械工程学报, 2026, 62(3): 203-217.
[3]	申昕昕, 钱明芳, 张学习, 孙良博, 耿林. 不同烧结温度对粘结剂喷射增材制造Ni-Mn-Ga合金的马氏体相变和磁性能影响研究[J]. 机械工程学报, 2025, 61(9): 157-167.
[4]	刘博, 张志强, 康嘉杰, 徐连勇, 龚攀, 罗任植, 张天刚. 双相不锈钢CMT-P电弧等离子体传热行为研究[J]. 机械工程学报, 2025, 61(10): 128-140.
[5]	曲杰, 黄美华. 锂离子电池膨胀力试验台开发及试验验证[J]. 机械工程学报, 2024, 60(22): 329-339.
[6]	余海燕, 贺宏伟, 邢萍. 考虑不同刚度退化模式的碳纤维增强复合材料失效模型开发[J]. 机械工程学报, 2024, 60(2): 197-208.
[7]	朱孙科, 闵旭, 董绍江. 基于改进相变方程的形状记忆合金弹性耦合系统特性分析[J]. 机械工程学报, 2024, 60(14): 194-205.
[8]	黄祥辉, 曹睿博, 郑睿恒, 马飞豪, 蒋益雪, 詹章瑜, 于天宇, 康楠. 选区激光熔化NiTi形状记忆合金成形与热处理[J]. 机械工程学报, 2023, 59(17): 250-257.
[9]	成奇, 郭宁, 张迪, 张帅, 陈昊, 何金龙. NiTi形状记忆合金与异种材料激光焊接研究进展[J]. 机械工程学报, 2023, 59(16): 182-191.
[10]	邓云飞, 吴华鹏, 杨笑岳, 王轩. 基于不同断裂准则的6061-T651铝合金板抗冲击性能数值仿真研究[J]. 机械工程学报, 2023, 59(14): 138-150.
[11]	李红刚, 张超, 曹俊超, 周典, 张美合. 锂离子电池碰撞安全仿真方法的研究进展与展望[J]. 机械工程学报, 2022, 58(24): 121-144.
[12]	李浩, 程嘉辉, 孙春亚, 李客, 谢贵重, 王昊琪, 黄荣杰, 郝兵, 刘俊, 王新昌. 基于CFD-DPM的大规模颗粒-流体系统数值仿真与分析[J]. 机械工程学报, 2022, 58(22): 450-461.
[13]	柯文超, 从保强, 祁泽武, 敖三三, 庞博文, 郭伟, 彭倍, 曾志. NiTi形状记忆合金电弧熔融涂覆及微连接机理[J]. 机械工程学报, 2022, 58(2): 176-184.
[14]	王悦昶, 刘莹, 李鸿举. 粗糙表面仿真方法综述[J]. 机械工程学报, 2022, 58(19): 148-165.
[15]	朱林, 邱建春, 陈敏. 基于修正Sobol灵敏度模型的拨穗授粉机疲劳寿命影响因素分析研究[J]. 机械工程学报, 2022, 58(16): 189-196.

形状记忆合金驱动的可变翼梢小翼设计与验证

Design and Assessment of Variable Winglet Driven by Shape Memory Alloy

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价