废旧机床主轴剩余寿命评估模型

doi:10.3901/JME.2021.04.219

机械工程学报 ›› 2021, Vol. 57 ›› Issue (4): 219-226.doi: 10.3901/JME.2021.04.219

扫码分享

废旧机床主轴剩余寿命评估模型

马硕, 姜兴宇, 杨国哲, 刘伟军, 乔赫廷, 王子生

沈阳工业大学机械工程学院沈阳 110027

收稿日期:2020-04-14 修回日期:2020-12-20 出版日期:2021-02-20 发布日期:2021-04-28
通讯作者: 杨国哲(通信作者),男,1973年出生,博士,讲师。主要研究方向为废旧机电产品再制造。E-mail:xiakexing1999@126.com
作者简介:马硕,男,1993年出生。主要研究方向为废旧机电产品再制造。E-mail:xy_jiang9211@sut.edu.cn
基金资助:
国家自然科学基金（51305279）和2016年绿色制造系统集成项目-机床绿色再制造关键工艺技术及应用示范资助项目。

Prediction and Evaluation Model for the Residual Life of Wasted Machine Tool Spindle

MA Shuo, JIANG Xingyu, YANG Guozhe, LIU Weijun, QIAO Heting, WANG Zisheng

Department of Mechanical Engineering, Shenyang University of Technology, Shenyang 110027

Received:2020-04-14 Revised:2020-12-20 Online:2021-02-20 Published:2021-04-28

摘要/Abstract

摘要： 如何准确评估废旧主轴的剩余寿命是其可再制造性评估的关键。基于此，针对废旧主轴的疲劳断裂失效现状，综合考虑裂纹闭合效应，加入裂纹拓展有效因子，提出一种基于非线性连续疲劳损伤模型的主轴剩余寿命评估模型。为提高主轴S-N曲线的拟合精度，疲劳试件是通过原废旧主轴的轴身经线切割加工而成，将主轴谐响应分析获得的六级最大应力，作为拉压疲劳试验的循环应力，从而获得接近实际主轴的S-N曲线。对于主轴剩余寿命评估模型参数求解问题，把试验得到的数据和参数通过非线性拟合中的最小二乘法，构建关于应力和寿命的S-N曲线，采用Python的方法来求解该模型中的参数使主轴的剩余寿命评估模型更具有准确性，来保证预测评估主轴剩余寿命结果的准确性。以某机床集团的CAK5085型数控车床的主轴为例，对其进行剩余寿命评估。通过试验的数据和模型的计算结果进行对比，验证修正后模型的准确性、可行性。

关键词: 再制造, 断裂力学, 剩余寿命评估, 裂纹闭合, 疲劳寿命曲线

Abstract: How to accurately assess the remaining life of a used spindle is the key to its remanufacturability assessment. Based on this, it focuses on the current status of fatigue fracture failure of worn spindles, comprehensively considers the crack closure effect, and adds a crack expansion effective factor, and proposes a spindle remaining life evaluation model based on a nonlinear continuous fatigue damage model. In order to improve the fitting accuracy of the S-N curve of the main shaft, the fatigue test piece is made by cutting the shaft body of the original waste main shaft by wire cutting, and the six-level maximum stress obtained by the harmonic response analysis of the main shaft is used as the cyclic stress of the tensile and compression fatigue test, thereby obtaining S-N curve close to the actual spindle. For the problem of solving the parameters of the remaining life evaluation model of the spindle, the data and parameters obtained by the experiment are constructed by the least square method in nonlinear fitting to construct the S-N curve about stress and life. The Python method is used to solve the parameters in the model so that the evaluation model of the remaining life of the spindle is more accurate to ensure the accuracy of the prediction of the remaining life of the spindle. Taking the spindle of the CAK5085 CNC lathe of a machine tool group as an example, the remaining life evaluation is carried out. The comparison between the test data and the calculation results of the model verifies the accuracy and feasibility of the revised model.

Key words: remanufacturing, fracture mechanics, residual life evaluation, crack closure, S-N Curve

中图分类号:

TH17

马硕, 姜兴宇, 杨国哲, 刘伟军, 乔赫廷, 王子生. 废旧机床主轴剩余寿命评估模型[J]. 机械工程学报, 2021, 57(4): 219-226.

MA Shuo, JIANG Xingyu, YANG Guozhe, LIU Weijun, QIAO Heting, WANG Zisheng. Prediction and Evaluation Model for the Residual Life of Wasted Machine Tool Spindle[J]. Journal of Mechanical Engineering, 2021, 57(4): 219-226.

参考文献

[1] 张啸尘,谢里阳,张瑞金,等. 预循环应力对材料断裂力学性能"锻炼"效应的影响[J]. 航空学报,2016,37(10):3074-3082. ZHANG Xiaochen,XIE liyang,ZHANG Ruijin,et al. ‘Coaxing effect’ of prior cycling stress on material fracture mechanics performance[J]. Acta Aeronautica et Astronautica Sinica,2016,37(10):3074-3082.
[2] 窦伟元,张乐乐,周挺,等. 基于仿真分析和疲劳试验的服役铸铝横梁剩余寿命评估[J]. 中国铁道科学,2019,40(4):103-111.DOU Weiyuan,ZHANG Lele,ZHOU Ting,et al. Prediction of remaining life of cast aluminum beams in service based on simulation analysis and fatigue test[J]. China Railway Science,2019,40(4):103-111.
[3] 张旭刚,张华,江志刚. 废旧零部件剩余使用寿命评估方法研究[J]. 机床与液压,2014,42(11):172-176.ZHANG Xugang,ZHANG Hua,JIANG Zhigang. Research on evaluation methods of remaining service life of waste components[J]. Machine Tool and Hydraulics,2014,42(11):172-176.
[4] MINER M A. Cumulative damage in fatigue[J]. Journal of Applied Mechanics,1945,67:159-164.
[5] MANSON S S. Interfaces between fatigue,creep,and fracture[J]. International Journal of Fracture Mechanics,1966,2:328-363.
[6] ELLYIN F,KUJAWSKI D. Plastic strain energy in fatigue failure[J]. ASME Journal of Pressure Vessel Technology,1984,106:342-347.
[7] MAKKONEN M. Predicting the total fatigue life in metals[J]. International Journal of Fatigue,2009,31(7):1163-1175.
[8] DATTOMA V,GIANCANE S,NOBILE R,et al. Fatigue life prediction under variable loading based on a new non-linear continuum damage mechanics model[J]. International Journal of Fatigue,2006,28(2):89-95.
[9] CHABOCHE J L,LESNE P M. A non-linear continuous fatigue damage model[J]. Fatigue & Fracture of Engineering Materials& Structures,1988,11(1):1-17.
[10] 华亮,田威,廖文和,等. 基于非线性连续疲劳损伤的再制造毛坯剩余寿命评估[J]. 机械工程学报,2015,51(21):132-136. HUA Liang,TIAN Wei,LIAO Wenhe,et al. Remaining life evaluation for remanufacturing blanks based on non-linear continuum fatigue damage model[J]. Journal of Mechanical Engineering,2015,51(21):132-136.
[11] GIANCANE S,NOBILE R,PANELLA F,et al. Fatigue prediction of notched components based on a new nonlinear continuum damage mechanics model[J]. Procedia Engineering,2010:1317-1325.
[12] 林杰威,张俊红,张桂昌,等. 基于连续非线性损伤的航空发动机叶片疲劳研究[J]. 机械工程学报,2010,46(18):66-70. LIN Jiewei,ZHANG Junhong,ZHANG Guichang,et al. Study on fatigue damage of aero-engine blade based on non-linear continuum damage model[J]. Journal of Mechanical Engineering,2010,46(18):66-70.
[13] 林有智,傅高升,李雷,等. 钛合金非线性疲劳损伤工程模型研究[J]. 船舶力学,2013,17(11):1300-1308. LIN Youzhi,FU Gaosheng,LI Lei,et al. Study on non-linear fatigue damage engineering model for titanium alloy[J]. Journal of Ship Mechanics,2013,17(11):1300-1308.
[14] 王光中. 材料的疲劳[M]. 北京:国防工业出版社,1999. WANG Guangzhong. Fatigue of material[M]. Beijing:National Defense Industry Press,1999.
[15] KUMAR R,SINGH K. Influence of stress ratio on fatigue crack growth in mild steel[J]. Engineering Fracture Mechanics,1995,50:377-384.
[16] FERGUSON M,GUIDE V D,KOCA E,et al. The value of quality grading in remanufacturing[J]. Production & Operations Management,2009,18(3):300-314.

废旧机床主轴剩余寿命评估模型

Prediction and Evaluation Model for the Residual Life of Wasted Machine Tool Spindle

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	高冲, 董丽虹, 王海斗, 刘彬, 吕晓仁. 整体加筋结构疲劳损伤研究进展[J]. 机械工程学报, 2024, 60(18): 116-127.
[2]	王蕾, 郭钰瑶, 曹建华, 张泽琳, 夏绪辉, 赵慧. 面向废旧机械产品广义生长的再制造服务组合与优化方法[J]. 机械工程学报, 2023, 59(7): 339-354.
[3]	王秀雨, 程江波, 葛云云, 张保森, 梁秀兵. 镁合金表面再制造AlCoTi非晶涂层组织及力学性能研究[J]. 机械工程学报, 2023, 59(7): 367-374,388.
[4]	成焕波, 郭立军, 周金虎, 王华锋, 汤明喜. 再生碳纤维回收利用及其增材制造复合材料性能评价[J]. 机械工程学报, 2023, 59(7): 375-388.
[5]	周丹, 王鹏程, 张腾飞, 宋守许. ZL101A合金TIG修复色差及组织性能间的相关性研究[J]. 机械工程学报, 2023, 59(7): 398-406.
[6]	王海斗, 张文宇, 宋巍. 再制造二十年足迹及发展趋势[J]. 机械工程学报, 2023, 59(20): 80-95.
[7]	韩啸, 孙亮亮, 刘博, 刘哲远, 吴承伟. 胶层厚度对胶接波纹板三点弯曲力学性能影响研究[J]. 机械工程学报, 2023, 59(2): 104-112.
[8]	冯晓慧, 高飞, 赵阳, 关雪飞, 何晶靖, 林京. 电弧增材再制造低碳钢疲劳性能研究[J]. 机械工程学报, 2023, 59(14): 151-158,168.
[9]	宋守许, 蔚辰, 李想, 徐瑞. 再制造工作辊热轧退化脉冲涡流在线监测方法研究[J]. 机械工程学报, 2023, 59(13): 228-237.
[10]	江志刚, 张俊辉, 朱硕, 鄢威, 张华. 面向寿命定制的废旧产品再制造设计过程模型研究[J]. 机械工程学报, 2023, 59(13): 238-245.
[11]	朱硕, 潘志强, 江志刚, 鄢威, 张华. 基于多寿命特征的废旧机电产品再升级设计研究进展[J]. 机械工程学报, 2022, 58(7): 183-192.
[12]	王金龙, 高斯博, 杨宇星, 鲍永杰, 张元良. 机械装备可再制造性评价研究综述[J]. 机械工程学报, 2022, 58(3): 221-234.
[13]	周丹, 吴亮, 徐意, 兰森. 激光凹坑拆解减损织构对过盈配合服役承载性能的影响实验研究[J]. 机械工程学报, 2022, 58(23): 208-217.
[14]	邢世雄, 江志刚, 朱硕, 张华. 尺寸精度约束下再制造产品零部件选配优化方法研究[J]. 机械工程学报, 2022, 58(19): 221-228.
[15]	宋守许, 郁炯, 蔚辰, 张志旭. 考虑多辊修磨关系的轧辊主动再制造设计方法[J]. 机械工程学报, 2022, 58(13): 203-212.