• CN：11-2187/TH
  • ISSN：0577-6686
机械工程学报

›› 2001, Vol. 37 ›› Issue (3): 1-4，10.

• 论文 •    下一篇

脆性材料超精密磨削时影响表面质量因素的研究

陈明君;董申;李旦;张飞虎   

  1. 哈尔滨工业大学精密工程研究所
  • 发布日期:2001-03-15

STUDY ON THE INFLUENCE FACTORS OF THE SURFACES QUALITY IN ULTRA-PRECISION GRINDING MACHINING OF BRITTLE MATERIALS

Chen Mingjun;Dong Shen;Li Dan;Zhang Feihu   

  1. Harbin Institute of Technology
  • Published:2001-03-15

摘要： 首先从理论上分析了脆性材料在超精密磨削过程中影响表面质量的各种主要因素。然后针对影响脆性材料已加工表面质量的各种主要因素作了大量的试验研究。研究结果表明，对于脆性材料，砂轮的平均磨粒尺寸对已加工表面质量的影响很大。试验证明：当采用超精密磨床并在vs＝1200m/min、f＝0～200μm/r、ap＝0.1～10μm的磨削条件下进行磨削时，只有当金刚石砂轮的平均磨粒尺寸小于20μm，才能在塑性磨削模式下加工出高质量的超光滑表面。

关键词: 超精密磨削加工, 脆性材料, 金刚石砂轮, 塑性域磨削加工

Abstract: The influence factors of ultra-precision grinding of brittle materials are investigated theoretically. And the various experiments on the influence of surface quality are preformed. The experimental investigation on the grinding of brittle materials is carried out. It is shown that the surface roughness is mainly related to the average grain size. In the case of vs＝1200m/min, f＝0～200μm/r, ap＝0.1～10μm, only when the average grain size of the diamond wheel is less than 20μm, the smooth high quality surface can be obtained under grinding in the ductile mode.

Key words: Brittle materials, Diamond wheels, Grinding in the ductile mode, Ultra-precision grinding machining

中图分类号: 

版权所有 © 2019 《机械工程学报》编辑部 | 京icp备05055788号-40