• CN:11-2187/TH
  • ISSN:0577-6686

›› 2000, Vol. 36 ›› Issue (6): 75-78.

• 论文 • 上一篇    下一篇

扫码分享

静压轴承自控系统动态品质的优化方法

刘伟;陈大融; 普拉卡宾卡 V A; 吴秀江   

  1. 清华大学摩擦学国家重点实验室;圣·彼得堡国立科技大学
  • 发布日期:2000-06-15

OPTIMAL METHODS OF THE DYNAMIC PROPERTIES IN A HYDROSTATIC BEARING SYSTEM

Liu Wei;Chen Darong;Prokopenlo V A;Wu Xiujiang   

  1. Qinghua University Saint-petersburg state Technical University
  • Published:2000-06-15

摘要: 提出带节流器的自适应性静压轴承系统动态品质的分析与优化方法,通过在系统内以不同方式引入类型各异的校正装置,可以改善轴承系统的动特性,提高主轴的回转精度。利用自控系统稳定性理论,对优化前后系统的过渡过程曲线和对数相频、幅频特性图像进行综合分析和对比,评定不同方法对轴承系统动特性改善的效果,并且对它们的应用范围作了说明,为改善主轴系统动态品质及其优化设计提供理论依据。

关键词: 动特性, 对数相频;幅频特性, 过渡过程, 静压轴承, 阻容链

Abstract: A new method is presented, to analyse and optimize the dynamic characteristics of self-adaptive hydrostatic bearing system with throttle. For the various correcting units are inserted. Dynamic properties of this system are effectively improved and rotary precision of the spindle is advanced. Based on the theory of stability for automatic control, the graphics of transient process and the logarithmic phase-frequency and amplitude-frequency characteristics of the system are analyzed before and after improvement. Influence on dynamics of the different methods is evaluated and their applied range is explained. The theoretical basis is provided for improving dynamic properties and optimization design of the hydrostatic bearing system.

Key words: Dynamic properties, Hydrostatic bearing, Logarithmic phase-frequency and amplitude-frequency characteristics, RC-Chain, Transient process

中图分类号: