• CN:11-2187/TH
  • ISSN:0577-6686

›› 1988, Vol. 24 ›› Issue (4): 34-40.

• 论文 • 上一篇    下一篇

扫码分享

高强度低碳马氏体型钢的组织结构与疲劳性能的关系

高惠临;谈育熙;王笑天   

  1. 西安石油学院;西安交通大学
  • 发布日期:1988-09-01

STRUCTURE-FATIGUE PROPERTY RELATIO NSHIP IN HIGH STRENGTH LOW-CARBON MARTENSITIC STEEL

Gao Huilin;Tan Yuxu;Wang Xiaotian   

  1. Xi’an petroleum Institute Xi’an jiaotong University
  • Published:1988-09-01

摘要: 本文对高强度低碳马氏体型钢的组织结构和疲劳性能间的关系进行了系统的研究。试验表明,在低温回火状态下,典型钢种25Si2Mn2CrNiMoV具有优良的疲劳强度和疲劳裂纹扩展抗力。试验钢中板条马氏中的位错亚结构,弥散分布的e碳化物以及良好的微观塑性延长了疲劳裂纹的萌生期。马氏体板条束,马氏体板条晶间的位向差以及马氏板条间的残余奥氏体薄膜则是控制疲劳裂纹扩展速率的组织结构因素。文中对在回火马氏体脆性区造成疲劳性能恶化的原因也进行了分析讨论。

关键词: 马氏体, 疲劳性能, 显微组织(金相学)

Abstract: Investigation has been made on the relationship between microstructure and fatigue property in high strength low-carbon martensitic steel. The results of experiment show that experimental steel has an excellent fatigue strength and a good resistance to fatigue crack propagation when tempered at low temperature. The dominant microstructural feature that contributes to fatigue strength is dislocated martensite matrix and carbides in martensite, whereas for the rate of fatigue crack propagation, the contribution is the orientation difference between adjacent martensite packets, martensite lathes and retained austensite in the form of thin interlath film. The factors affecting deterioration of fatigue behavior in ,tempered martensite embritelement range have also been discussed.

Key words: 马氏体, 疲劳性能, 显微组织(金相学)