铁道车辆转向架振动疲劳载荷定义方法探讨

doi:10.3901/JME.2024.22.311

机械工程学报 ›› 2024, Vol. 60 ›› Issue (22): 311-328.doi: 10.3901/JME.2024.22.311

扫码分享

铁道车辆转向架振动疲劳载荷定义方法探讨

张振先^1,2, 吴兴文³, 吴圣川¹, 刘开成¹, 刘阳¹, 池茂儒¹, 温泽峰¹, 梁树林¹, 金学松¹

1. 西南交通大学轨道交通运载系统国家重点实验室成都 610031;
2. 中车青岛四方机车车辆股份有限公司青岛 266111;
3. 西南交通大学机械工程学院成都 610031

收稿日期:2024-01-05 修回日期:2024-07-11 出版日期:2024-11-20 发布日期:2025-01-02
作者简介:张振先,男,1982年出生,正高级工程师。主要研究方向为振动疲劳,车辆系统动力学。E-mail:zhangzhenxian@cqsf.com;吴兴文(通信作者),男,1988年出生,博士,副教授,硕士研究生导师。主要研究方向为振动疲劳,车辆系统动力学。E-mail:xingwen_wu@163.com
基金资助:
四川省自然科学基金(2024NSFSC0187)、中国科协青年人才托举工程(2019Q NRC001)和中国国家铁路集团有限公司科技研究开发计划(N2022J009)资助项目。

Investigation on Load Definition of Vibration Fatigue of Railway Vehicle Bogie

ZHANG Zhenxian^1,2, WU Xingwen³, WU Shengchuan¹, LIU Kaicheng¹, LIU Yang¹, CHI Maoru¹, WEN Zefeng¹, LIANG Shulin¹, JIN Xuesong¹

1. State Key Laboratory of Traction Power, Southwest Jiaotong University, Chengdu 610031;
2. CRRC Qingdao Sifang Co., Ltd., Qingdao 266111;
3. School of Mechanical Engineering, Southwest Jiaotong University, Chengdu 610031

Received:2024-01-05 Revised:2024-07-11 Online:2024-11-20 Published:2025-01-02
About author:10.3901/JME.2024.22.311

摘要/Abstract

摘要： 载荷是铁道车辆转向架抗疲劳设计的基本输入，梳理现有标准载荷定义方法和阐明标准载荷与实际服役载荷的差异，对铁道车辆转向架抗疲劳设计具有重要意义。基于此，梳理铁道车辆转向架部件振动疲劳失效的普遍特点、主要诱因及解决方案；从动力学角度阐释转向架构架主体载荷的定义方法，提出实测载荷谱向标准三阶段载荷系数的转化方法，探讨浮沉和侧滚载荷系数的安全裕量；针对转向架附属部件振动谱，探明标准轴箱振动谱与实测振动谱的差异性。结果表明：转向架失效的部件主要以附属部件为主，轮轨高频振动导致的结构共振是转向架部件振动疲劳失效的主要诱因。标准定义的车辆浮沉系数相比实际服役条件具有较高的安全裕量，侧滚载荷系数受车辆稳定性影响较大；现有标准转向架轴箱振动谱低估了高频范围的振动能量，提出了考虑轮轨多特征频带的轴箱振动平直谱定义方法。针对转向架振动疲劳载荷定义的相关讨论，为铁道车辆转向架振动疲劳正向设计提供理论参考。

关键词: 铁道车辆, 转向架, 振动疲劳, 疲劳载荷系数, 轴箱振动谱

Abstract: The load is the fundamental input for the fatigue-resistant design of railway vehicle bogies. Understanding the definition method of standard loads and elaborating the differences between standard loads and service loads is of great significant importance for the fatigue-resistant design of railway vehicle bogies. The main characteristics and causal factors of vibration fatigue of bogie system, as well as the countermeasures, are primarily reviewed. The load definition methods of standard loads are explained from the vehicle system dynamics point of view, and a method is developed to convert the random loading spectrum to three-levels loading spectrum, which further facilitate to study the applicability and safety margin of bounce and roll factors for China high-speed railway. Regarding to the vibration spectrum of bogie components, the difference between the standard and measured vibration spectrum is discussed. The results show that the most failure cases occurred at the sub-components of railway bogie, the structural resonance caused by high frequency wheel-rail vibration serves as the main cause of vibration fatigue failure of bogie components. Compared with the actual service conditions, the bounce coefficient of vehicle given in standard has a higher safety margin, and the rolling coefficient is significantly affected by the vehicle stability. The vibration spectrum of axle box defined in the standard underestimates the vibration level in the high frequency range. Therefore, according to the characteristics of wheel-rail coupling vibration, the characteristic frequency band of axle box is defined, and a flat vibration spectrum of axle box considering multi-characteristic frequency band of wheel/rail is proposed. The discussions of loading definition for bogie system given could serve as an important reference for the vibration fatigue design of railway vehicles.

Key words: rail vehicle, bogie system, vibration fatigue, loading coefficient of fatigue, vibration spectrum of axle box

中图分类号:

TG156

张振先, 吴兴文, 吴圣川, 刘开成, 刘阳, 池茂儒, 温泽峰, 梁树林, 金学松. 铁道车辆转向架振动疲劳载荷定义方法探讨[J]. 机械工程学报, 2024, 60(22): 311-328.

ZHANG Zhenxian, WU Xingwen, WU Shengchuan, LIU Kaicheng, LIU Yang, CHI Maoru, WEN Zefeng, LIANG Shulin, JIN Xuesong. Investigation on Load Definition of Vibration Fatigue of Railway Vehicle Bogie[J]. Journal of Mechanical Engineering, 2024, 60(22): 311-328.

参考文献

[1] 吴圣川，任鑫焱，康国政，等. 铁路车辆部件抗疲劳评估的进展与挑战[J]. 交通运输工程学报，2021，21(1)：81-114. WU Shengchun，REN Xinyan，KANG Guozheng，et al. Process and challenge on fatigue resistance assessment of railway vehicle components[J]. Journal of Traffic and Transportation Engineering，2021，21(1)：81-114.
[2] 卢耀辉，曾京，邬平波，等. 铁路车辆关键部件静强度及疲劳寿命的有限元分析方法[J]. 重庆工学院学报(自然科学版)，2007，21(10)：23-27. LU Yaohui，ZENG Jing，WU Pingbo，et al. Finite element analysis method for static intensity and fatigue life of railway vehicle key parts[J]. Journal of Chongqing Institute of Technology(Natural Science Edition)，2007，21(10)：23-27.
[3] 储高峰，陈璨，李国顺. 解析铁道行业标准《机车车辆强度设计及试验鉴定规范转向架第1部分：转向架构架》[J]. 铁道技术监督，2021，49(2)：1-6. CHU Gaofeng，CHEN Can，LI Guoshun. Analysis of railway standards《Strength design and test accreditation specification for rolling stock—Bogie—Part I：Bogie frame》[J]. Railway Quality Control，2021，49(2)：1-6.
[4] 张卫华. 高速列车耦合大系统动力学理论与实践[M]. 北京：科学出版社，2020. ZHANG Weihua. Coupling system dynamics of High- speed train—Theory and application[M]. Beijing：Science Press，2020.
[5] 任尊松，曹杰，李玉怡，等. 高速动车组构架载荷特征研究[J]. 工程力学，2021，38(2)：242-256. REN Zunsong，CAO Jie，LI Yuyi，et al. The load characteristics of the bogie frame of high-speed EMUs[J]. Engineering Mechanics，2021，38(2)：242-256.
[6] 杨广雪，李广全，周君锋，等. 高速动车组牵引拉杆载荷特性研究[J]. 机械工程学报，2020，56(8)：200-206. YANG Guangxue，LI Guangquan，ZHOU Junfeng，et al. Study on traction rod load characteristics of high-speed train[J]. Journal of Mechanical Engineering，2020，56(8)：200-206.
[7] 邹骅，吴奇峰，孙守光. 基于损伤一致性的动车组转向架载荷实验谱研究[J]. 力学学报，2021，53(1)：115-125. ZOU Hua，WU Qifeng，SUN Shouguang. Research on load test spectrum of EMU car bogies based on damage consistency[J]. Chinese Journal of Theoretical and Applied Mechanics，2021，53(1)：115-125.
[8] 王文静，王燕，孙守光，等. 高速列车转向架载荷谱长期跟踪试验研究[J]. 西南交通大学学报，2015，50(1)：84-89. WANG Wenjing，WANG Yan，SUN Shouguang，et al. Long-term load spectrum test of high-speed train bogie[J]. Journal of Southwest Jiaotong University，2015，50(1)：84-89.
[9] CAI Wubin，CHI Maoru，WU Xingwen，et al. Experimental and numerical analysis of the polygonal wear of high-speed trains[J]. Wear，2019，440，203079.
[10] CAI Wubin，CHI Maoru，WU Xingwen，et al. A long-term tracking test of high-speed train with wheel polygonal wear[J]. Vehicle System Dynamics，2021，59(11)：1735-1758.
[11] WU Xingwen，RAKHEJA S，WU Huichao，et al. A study of polygonal wheel wear through a field test programme[J]. Vehicle System Dynamics，2019，57(6)：914-934.
[12] 唐琦. 时速120公里客车209P转向架焊接构架可靠性提升技术研究[D]. 北京：北京交通大学，2016. TANG Qi. Research on reliability improvement of 209P bogie welded frame of passenger car with 120 kilometers per hour[D]. Beijing：Beijing Jiaotong University，2016.
[13] 薛源. 基于209P转向架构架裂纹疲劳研究[D]. 成都：西南交通大学，2015. XUE Yuan. Study the fracture base on the crack of 209P bogie frame[D]. Chengdu：Southwest Jiaotong University，2015.
[14] WANG Binjie，XIE Shuqiang，JIANG Chongyong，et al. An investigation into the fatigue failure of metro vehicle bogie frame[J]. Engineering Failure Analysis，2020，118：104922.
[15] WANG Wenjing，BAI Jinyi，WU Shengchuan，et al. Experimental investigations on the effects of fatigue crack in urban metro welded bogie frame[J]. Applied Sciences，2020，10(4)：1537.
[16] ZHANG Bing，ANDY C T，LIN Jianhui. Gearbox fault diagnosis of high-speed railway train[J]. Engineering Failure Analysis，2016，66：407-420.
[17] WANG Zhiwei，MEI Guiming，ZHANG Weihua，et al. Effects of polygonal wear of wheels on the dynamic performance of the gearbox housing of a high-speed train[J]. Proceedings of the Institution of Mechanical Engineers，Part F：Journal of Rail and Rapid Transit，2018，232(6)：1852-1863.
[18] WU Hao，WU Pingbo，LI Fansong，et al. Fatigue analysis of the gearbox housing in high-speed trains under wheel polygonization using a multibody dynamics algorithm[J]. Engineering Failure Analysis，2019，100：351-364.
[19] ZHOU Cheng，CHI Maoru，WEN Zefeng，et al. An investigation of abnormal vibration–induced coil spring failure in metro vehicles[J]. Engineering Failure Analysis，2020，108：104238.
[20] WANG Kaiyun，YANG Yifan，YANG Yunfan，et al. An experimental investigation of the mechanism and mitigation measures for the coil spring fracture of a locomotive[J]. Engineering Failure Analysis，2022，135：106157.
[21] 张春玉，王科飞，李本怀，等. 城市轨道交通车辆转向架天线梁随机振动疲劳分析[J]. 城市轨道交通研究，2019，22(6)：52-55. ZHANG Chunyu，WANG Kefei，LI Benhuai，et al. Random vibration fatigue analysis of urban rail transit vehicle ATP antenna beam[J]. Urban Mass Transit，2019，22(6)：52-55.
[22] 于宏建. 地铁天线梁疲劳寿命及振动特性研究[D]. 北京：北京交通大学，2015. YU Hongjian. Fatigue life and vibration characteristics analysis of subway antenna beam[D]. Beijing：Beijing Jiaotong University，2015.
[23] 张春玉，程亚军. 基于实测载荷谱的ATP天线梁随机振动疲劳分析[J]. 大连交通大学学报，2015，36(6)：44-47. ZHANG Chunyu，CHENG Yajun. Random vibration fatigue analysis of ATP antenna beam based on measured spectrum data[J]. Journal of Dalian Jiaotong University，2015，36(6)：44-47.
[24] 蔡川东. 考虑高频振动的地铁转向架天线梁疲劳强度研究[D]. 成都：西南交通大学，2018. CAI Chuandong. Study on fatigue strength of antenna beam of subway bogie considering high frequency vibration[D]. Chengdu：Southwest Jiaotong University，2018.
[25] WU Xingwen，XIE Chengxi，LIU Kangcheng，et al. Study on high frequency vibration-induced fatigue failure of antenna beam in a metro bogie[J]. Engineering Failure Analysis，2020，133：105976.
[26] 谢晨希，陶功权，温泽峰. 地铁车辆制动管路动应力分析及结构优化[J]. 机械工程学报，2021，57(10)：118-125. XIE Chenxi，TAO Gongquan，WEN Zefeng. Dynamic stress analysis and structural optimization of braking pipeline of metro vehicle[J]. Journal of Mechanical Engineering，2021，57(10)：118-125.
[27] 石怀龙，王建斌，戴焕云，等. 地铁车辆轴箱吊耳断裂机理和试验研究[J]. 机械工程学报，2019，55(6)：122-128. SHI Huailong，WANG Jianbin，DAI Huanyun，et al. Crack mechanism and field test of the metro safety hanger[J]. Journal of Mechanical Engineering，2019，55(6)：122-128.
[28] 杨雨，周劲松，孙煜，等. 地铁车辆轴箱吊耳断裂机理分析及优化[J]. 城市轨道交通研究，2021，24(5)：212-216. YANG Yu，ZHOU Jinsong，SUN Yi，et al. Fracture mechanism analysis and structure optimization of metro vehicle axle box lifting lugs[J]. Urban Mass Transit，2021，24(5)：212-216.
[29] 胡定祥，何斌斌，徐步震，等. 轮对提吊异常振动分析及改进[J]. 铁道机车车辆，2019，39(1)：103-108. HU Dingxiang，HE Binbin，XU Buzhen，et al. Analysis and improvement of abnormal vibration based on wheelset lift[J]. Railway Locomotive & Car，2019，39(1)：103-108.
[30] LI Fansong，WU Hao，WU Pingbo. Vibration fatigue dynamic stress simulation under non-stationary state[J]. Mechanical Systems and Signal Processing，2021，146：107006.
[31] 胡忠安，轩亮，崔城玮. 地铁车辆转向架排障器疲劳分析[J]. 轨道交通装备与技术，2017(3)：30-32. HU Zhongan，XUAN Liang，CUI Chengwei. Fatigue analysis of bogie safety guide for metro vehicles[J]. Rail Transportation Equipment and Technology，2017(3)：30-32.
[32] 宋庆伟，张晶，王晗. 基于模态应力的转向架关键悬挂件振动疲劳研究[J]. 机车电传动，2018(5)：42-45，52. SONG Qingwei，ZHANG Jing，WANG Han. Vibration fatigue of key suspension parts of bogies based on modal stress[J]. Electric Drive for Locomotives，2018(5)：42-45，52.
[33] 林鹏，鞠增业，赵子豪. 某型动车组转向架撒砂装置模态及随机振动疲劳分析[J]. 现代商贸工业，2018，39(12)：192-194. LING Peng，QU Zengye，ZHAO Zihao. Modal and random vibration fatigue analysis of a type EMU bogie sanding device[J]. Modern Business Trade Industry，2018，39(12)：192-194.
[34] 林勤，李国栋，张宇峥，等. 某地铁转向架轴端电缆支架裂纹原因分析及优化设计[J]. 铁道车辆，2020，58(10)：13-15，28，5. LING Qin，LI Guodong，ZHANG Yuzheng，et al. Analysis of cause of axle end cable supports on bogies for a certain type metro and optimization design[J]. Railway Vehicle，2020，58(10)：13-15，28，5.
[35] 杨晶，马晓龙，王洪权，等. 地铁车辆轴箱接地端子异常开裂原因分析[J]. 城市轨道交通研究，2022，25(2)：103-107. YANG Jing，MA Xiaolong，WANG Hongquan，et al. Causes analysis of abnormal grounding terminal cracking of metro vehicle axle box[J]. Urban Mass Transit，2022，25(2)：103-107.
[36] MAO Liyong，WANG Wenjing，LIU Zhiming，et al. Research on causes of fatigue cracking in the motor hangers of high-speed trains induced by current fluctuation[J]. Engineering Failure Analysis，2021，127：105508.
[37] 李培行，刘宏友，苏砚帮. 快速货车转向架发展及构架强度试验标准探讨[J]. 国外铁道车辆，2018，55(6)：35-40. LI Peixing，LIU Hongyou，SU Yanbang. Development of rapid freight car bogies and discussion on strength test standards for frames[J]. Guo Wai Tie Dao Che Liang，2018，55(6)：35-40.
[38] CEN：Railway applications-Wheelsets and bogies-Method of specifying the structural requirements of bogie frames：EN 13749-2011-06[S]. Official Journal of the European Union，2011.
[39] 黄问盈. 铁道轮轨黏着系数[J]. 铁道机车车辆，2010，30(5)：17-25，33. HUANG Wenying. Railway wheel-rail adhesion coefficient[J]. Railway Locomotive & Car，2010，30(5)：17-25，33.
[40] CHANG Chongyi，CHEN Bo，CAI Yuanwu，et al. Experimental investigation of high-speed wheel-rail adhesion characteristics under large creepage and water conditions[J]. Wear，2024，540：205254.
[41] RENNERT R. Measured load spectra of rail vehicle car-bodies and their application as design loads[J]. International Journal of Fatigue，2021，144：106030.
[42] 马超智，高亮，曾钦娥，等. 高速铁路轮轨耦合振动模态特征及其影响因素研究[J]. 铁道学报，2021，43(12)：85-93. MA Chaozhi，GAO Liang，ZENG Qine，et al. Study on modal characteristics and influencing factors of wheel-rail coupling vibration of high-speed railway[J]. Journal of the China Railway Society，2021，43(12)：85-93.
[43] 关庆华，张丹熙，王鹏，等. 扣件支撑长度对车轮-轨道耦合振动的影响[J]. 机械工程学报，2019，55(16)：159-169. GUAN Qinghua，ZHANG Danxi，WANG Peng，et al. Influence of pad support length on the vibration of wheel- track[J]. Journal of Mechanic Engineering，2019，55(16)：159-169.
[44] GRASSIE S L. Rail corrugation：Characteristics，causes，and treatments[J]. Proceedings of the Institution of Mechanical Engineers，Part F：Journal of Rail and Rapid Transit，2009，223(6)：581-596.
[45] GRASSIE S L. Rail corrugation：Advances in measurement，understanding and treatment[J]. Wear，2005，258(7-8)：1224-1234.
[46] SATO Y，MATSUMOTO A，KNOTHE K. Review on rail corrugation studies[J]. Wear，2002，253(1-2)：130-139.
[47] CAI Wubin，CHI Maoru，TAO Gongquan，et al. Experimental and numerical investigation into formation of metro wheel polygonalization[J]. Shock and Vibration，2019，2019(1)：1538273.
[48] TAO Gongquan，WEN Zefeng，LIANG Xiren，et al. An investigation into the mechanism of the out-of-round wheels of metro train and its mitigation measures[J]. Vehicle System Dynamics，2019，57(1)：1-16.
[49] 李伟. 地铁钢轨波磨成因及其对车辆/轨道行为的影响[D]. 成都：西南交通大学，2015. LI Wei. Study on root cause of metro rail corrugation and its influence on behavior of vehicle-track system[D]. Chengdu：Southwest Jiaotong University，2015.
[50] WU Tianxing，THOMPSON D J. Behaviour of the normal contact force under multiple wheel/rail interaction[J]. Vehicle System Dynamics，2002，37(3)：157-174.
[51] WU Xingwen，RAKHEJA S，CAI Wubin，et al. A study of formation of high order wheel polygonalization[J]. Wear，2019，424：1-14.
[52] CAI Wubin，CHI Maoru，WU Xingwen，et al. Experimental and numerical analysis of the polygonal wear of high- speed trains[J]. Wear，2019，440：203079.
[53] QU Sheng，ZHU Bin，ZENG Jing，et al. Experimental investigation for wheel polygonisation of high-speed trains[J]. Vehicle System Dynamics，2021，59(10)：1573- 1586.
[54] 中国航空工业集团公司. GJB/Z126－1999振动、冲击环境测量数据归纳方法[S]. 北京：中国标准出版社，1999. Aviation Industry Corporation of China. GJB/Z126—1999 Vibration and impact environment measurement data induction method[S]. Beijing：Standards Press of China，1999.
[55] 田永卫，闫楚良，张书明，等. 飞机随机振动环境实测试验数据的归纳方法[J]. 振动.测试与诊断，2014，34(6)：1129-1133，1175. TIAN Yongwei，YAN Chuliang，ZHANG Shuming，et al. Inductive method of flight test data measured from aircraft random vibration environment[J]. Journal of Vibration，Measurement & Diagnosis，2014，34(6)：1129-1133，1175.
[56] 王茜，雷晓波. 发动机着陆冲击数据归纳方法及冲击特性分析[J]. 振动. 测试与诊断，2021，41(3)：601-605，628. WANG Qian，LEI Xiaobo. Inductive method of landing shock data of aero-engine and shock characteristics analysis[J]. Journal of Vibration，Measurement & Diagnosis，2021，41(3)：601-605，628.
[57] 高文涛，张武林. 振动飞行试验数据归纳方法研究[J].现代机械，2020(3)：54-57. GAO Wentao，ZHANG Wulin. Study on the induction method of vibration flight test data[J]. Modern Machinery，2020(3)：54-57.
[58] 王妙，纪春阳，杨剑锋，等. 无人机机机载振动测量系统与数据归纳方法研究[J]. 电子产品可靠性与环境试验，2022，40(3)：60-65. WANG Miao，JI Chunyang，YANG Jianfeng，et al. The study of airborne vibration measurement system and data processing method for UAV[J]. Electronic Product Reliability and Environmental Testing，2022，40(3)：60-65.
[59] 邓辰鑫，周劲松，宫岛，等. 轨道车辆振动实测环境的谱归纳技术[J]. 同济大学学报(自然科学版)，2019，47(10)：1514-1519. DENG Chenxin，ZHOU Jinsong，GONG Dao，et al. Spectrum induction method of vibration in rail vehicle’s measurement environment[J]. Journal of Tongji University (Natural Science)，2019，47(10)：1514-1519.
[60] 韩兴晋，周劲松，邓辰鑫. 基于谱归纳的车辆振动分析[J]. 噪声与振动控制，2021，41(5)：26-30. HAN Xingjin，ZHOU Jinsong，DENG Chenxin. Vehicle vibration analysis based on spectrum induction[J]. Noise and Vibration Control，2021，41(5)：26-30.
[61] WU Xingwen，CHI Maoru，WU Pingbo. Influence of polygonal wear of railway wheels on the wheel set axle stress[J]. Vehicle System Dynamics，2015，53(11)：1535-1554.
[62] WU Xingwen，CHI Mao，GAO Hao. Damage tolerances of a railway axle in the presence of wheel polygonalizations[J]. Engineering Failure Analysis，2016，66：44-59.
[63] GUO Feng，WU Shengchuan，LIU Jianxin，et al. A time- domain stepwise fatigue assessment to bridge small-scale fracture mechanics with large-scale system dynamics for high-speed maglev lightweight bogies[J]. Engineering Fracture Mechanics，2021，248：107711.
[64] GUO Feng，WU Shengchuan，LIU Jianxing，et al. An innovative stepwise time-domain fatigue methodology to integrate damage tolerance into system dynamics[J]. Vehicle System Dynamics，2022，17：1-23.

铁道车辆转向架振动疲劳载荷定义方法探讨

Investigation on Load Definition of Vibration Fatigue of Railway Vehicle Bogie

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	邹晓龙, 杨广雪, 张波, 李国顺, 张义超, 陈璨, 张书郡. 高速动车组转向架构架动应力特征研究[J]. 机械工程学报, 2024, 60(8): 212-223.
[2]	李凡松, 宋烨, 戴焕云, 曾京. 铁道车辆结构模态匹配设计准则研究[J]. 机械工程学报, 2024, 60(16): 324-337.
[3]	肖春昱, 罗湘萍, 田师峤, 宫岛. 基于转向架姿态轨迹的轨道线路曲率探测系统研究[J]. 机械工程学报, 2023, 59(6): 204-213.
[4]	杨绍普, 顾晓辉, 刘永强, 邓飞跃, 刘泽潮, 刘文朋, 王宝森. 转向架关键运动部件动力学机理与故障诊断研究综述[J]. 机械工程学报, 2023, 59(20): 225-243.
[5]	曾鹏程, 池茂儒, 代亮成. 铁道车辆抗侧滚扭杆的抗侧滚刚度改进计算方法研究及验证[J]. 机械工程学报, 2023, 59(16): 353-360.
[6]	陶桂东, 王文静, 冯永华, 李广全. 基于线路实测载荷的转向架构架台架试验方法研究[J]. 机械工程学报, 2023, 59(14): 213-221.
[7]	娄振, 蔡路, 李田, 张继业. 高速列车转向架区域积雪结冰数值仿真研究[J]. 机械工程学报, 2023, 59(12): 343-353.
[8]	徐宁, 张波, 任尊松, 李强, 杨超, 杨广雪, 陈璨. 基于运用条件和频域特征的动车组转向架构架疲劳损伤规律研究[J]. 机械工程学报, 2022, 58(8): 215-226.
[9]	谢树强, 王斌杰, 王文静, 张浩楠, 李强, 姜朝勇. 基于动应力的地铁构架疲劳损伤与疲劳寿命计算[J]. 机械工程学报, 2022, 58(4): 183-190.
[10]	肖望强, 陈辉, 许展豪, 王兴民, 贾尚帅, 潘德阔. 基于颗粒阻尼的内燃动车组动力包构架多工况减振研究[J]. 机械工程学报, 2022, 58(4): 250-257.
[11]	王腾飞, 周劲松, 季元进, 王秋实. 基于虚拟激励算法与频域主S-N曲线法的转向架随机振动疲劳分析[J]. 机械工程学报, 2022, 58(12): 140-150.
[12]	陶功权, 温泽峰, 金学松. 铁道车辆车轮非圆化磨耗形成机理及控制措施研究进展[J]. 机械工程学报, 2021, 57(6): 106-120.
[13]	姬程翔, 孙守光, 杨广雪, 孟庆导. 高速列车转向架构架扭转载荷特征研究[J]. 机械工程学报, 2021, 57(2): 147-157.
[14]	黄尊地, 池茂儒, 冯永华, 常宁, 王前选. 横风作用下跨线运行动车组转向架气动力变化规律研究[J]. 机械工程学报, 2020, 56(22): 219-226.
[15]	张子璠, 杨广雪, 李强, 刘汉文. 地铁转向架构架台架试验载荷谱编制方法[J]. 机械工程学报, 2020, 56(18): 134-142.