Journal of Mechanical Engineering

2019, Volume 55 Issue 13 Publication:05 July 2019
Previous Issue Next Issue
Nonlinear Resonance and Its Calculations and Applications
HOU Lei, CHEN Yushu
机械工程学报. 2019, 55 (13): 1-12. doi: 10.3901/JME.2019.13.001
Abstract ( 825 )    PDF(55845KB) ( 1083 )
References | Related Articles | Metrics
Matching Synchrosqueezing Transform for Aero-engine's Signals with Fast Varying Instantaneous Frequency

CHEN Xuefeng, WANG Shibin, CHENG Li
Journal of Mechanical Engineering. 2019, 55 (13): 13-22. doi: 10.3901/JME.2019.13.013
Abstract ( 1000 )    PDF(4094KB) ( 663 )
References | Related Articles | Metrics
Non-linear Transient Rotor-dynamics Analysis of Fan Blade Out
LIU Yang, LI Cheng, LI Fucai, LI Hongguang
机械工程学报. 2019, 55 (13): 23-37. doi: 10.3901/JME.2019.13.023
Abstract ( 680 )    PDF(2950KB) ( 566 )
References | Related Articles | Metrics
Failure Diagnosis on Gas Path of Fan/compressor Based on Acoustic Mode
CHENG Li, YANG Wukui, LIANG Tao, WEN Bi, YAO Dongye
机械工程学报. 2019, 55 (13): 38-44. doi: 10.3901/JME.2019.13.038
Abstract ( 856 )    PDF(4786KB) ( 544 )
References | Related Articles | Metrics
The Study on the Fatigue Crack Growth of Nickel Based Directional Solidification Superalloys DZ125
SHI Yi, YANG Xiaoguang, YANG Didi, MIAO Guolei, SHI Duoqi
机械工程学报. 2019, 55 (13): 45-52. doi: 10.3901/JME.2019.13.045
Abstract ( 679 )    PDF(2227KB) ( 672 )
References | Related Articles | Metrics
A Review of Design and Dynamics for the GTF Aero-engine
CAO Shuqian, HOU Lanlan
机械工程学报. 2019, 55 (13): 53-63. doi: 10.3901/JME.2019.13.053
Abstract ( 828 )    PDF(1699KB) ( 693 )
References | Related Articles | Metrics
Research on Blade Synchronous Vibration Parameter Identification Using Blade Tip Timing without the once per Revolution Sensor
ZHOU Changyi, HU Haifeng, YANG Yongmin, GUAN Fengjiao, XU Hailong
机械工程学报. 2019, 55 (13): 64-71. doi: 10.3901/JME.2019.13.064
Abstract ( 860 )    PDF(1165KB) ( 652 )
References | Related Articles | Metrics
Fatigue Mechanism Experiment Method of Blade Fracture Failure in Aero-engine
CHENG Li, CHEN Lishun, LI Silu, LIU Jingyuan
机械工程学报. 2019, 55 (13): 72-79. doi: 10.3901/JME.2019.13.072
Abstract ( 666 )    PDF(2513KB) ( 441 )
References | Related Articles | Metrics
Superharmonic Resonance Analysis of Misaligned Rotor System Based on HB-AFT Method
LI Hongliang, HOU Lei, XU Meipeng, CHEN Yushu
机械工程学报. 2019, 55 (13): 80-86. doi: 10.3901/JME.2019.13.080
Abstract ( 654 )    PDF(662KB) ( 543 )
References | Related Articles | Metrics
Study on Foreign Object Damage Regular Pattern of Aero Engine Compressor Blades
SHU Chang, CHENG Ming, XU Yu, CHENG Li
机械工程学报. 2019, 55 (13): 87-94. doi: 10.3901/JME.2019.13.087
Abstract ( 789 )    PDF(879KB) ( 608 )
References | Related Articles | Metrics
Theoretical Analysis and Experiment Research for Prefabricating Crack in the Aero-engine Disk Simulator
LIU Ruonan, GENG Jia, ZHANG Ruiling, CHEN Xuefeng
机械工程学报. 2019, 55 (13): 95-101. doi: 10.3901/JME.2019.13.095
Abstract ( 889 )    PDF(1494KB) ( 611 )
References | Related Articles | Metrics
A Numerical Approach to Investigate 3D Crack Behavior on Aeroengine Hot-end Components
LIU He, YANG Xiaoguang, SHI Duoqi
机械工程学报. 2019, 55 (13): 102-112. doi: 10.3901/JME.2019.13.102
Abstract ( 602 )    PDF(2305KB) ( 603 )
References | Related Articles | Metrics
Compressed Sensing-based Blind Reconstruction of Multi-frequency Blade Vibration from Under-sampled BTT Signals
XU Hailong, YANG Yongmin, HU Haifeng, GUAN Fengjiao, CHEN Zhongsheng
机械工程学报. 2019, 55 (13): 113-121. doi: 10.3901/JME.2019.13.113
Abstract ( 761 )    PDF(1384KB) ( 754 )
References | Related Articles | Metrics
Microstructural Damage Analysis of Service Turbine Blades for an Aero-engine
FAN Yongsheng, HUANG Weiqing, YANG Xiaoguang, SHI Duoqi
机械工程学报. 2019, 55 (13): 122-128. doi: 10.3901/JME.2019.13.122
Abstract ( 686 )    PDF(3649KB) ( 509 )
References | Related Articles | Metrics
A Slicing Optimization Method of Manifold Model for 3D Printing Based on Dual Inclinations Probability
XU Jinghua, REN Xinhua, CHEN Qianyong, ZHANG Shuyou, TAN Jianrong
机械工程学报. 2019, 55 (13): 129-143. doi: 10.3901/JME.2019.13.129
Abstract ( 696 )    PDF(8903KB) ( 629 )
References | Related Articles | Metrics
Performance Study of Lightweight Composites Equipment Section Support Fabricated by Selective Laser Sintering
YAN Mengxue, TIAN Xiaoyong, PENG Gang, LI Dichen, YAO Ruijuan, ZHANG Wei, BAI Rui, MENG Weijie
机械工程学报. 2019, 55 (13): 144-150. doi: 10.3901/JME.2019.13.144
Abstract ( 900 )    PDF(2043KB) ( 780 )
References | Related Articles | Metrics
Optimized Continuous Trajectory Look-ahead Algorithm with Comprehensive Multi-constraints
CHEN Lin, HUANG Xufeng, LIU Meng, YUAN Shanshan, HE Feixiang, YI Jian, PAN Haihong
机械工程学报. 2019, 55 (13): 151-159. doi: 10.3901/JME.2019.13.151
Abstract ( 767 )    PDF(1405KB) ( 444 )
References | Related Articles | Metrics
Combining Multi-objective Differential Evolution Algorithm and Linear Programming for Multiple Row Facility Layout Problem
GUAN Chao, ZHANG Zeqiang, LI Yunpeng, JIA Lin
机械工程学报. 2019, 55 (13): 160-174. doi: 10.3901/JME.2019.13.160
Abstract ( 702 )    PDF(690KB) ( 695 )
References | Related Articles | Metrics
Programmable Shape-shifting from Planar Sheets to Curved Geometries via Front Photopolymerization Approach
WANG Jinqiang, CHENG Xiaosheng, DAI Ning, LI Dawei, ZHOU Xin, TANG Yunlong
机械工程学报. 2019, 55 (13): 175-184,194. doi: 10.3901/JME.2019.13.175
Abstract ( 508 )    PDF(3822KB) ( 403 )
References | Related Articles | Metrics
Research on Grinding Experiment of the Micro-drill Flute
LIANG Zhiqiang, GUO Haixin, ZHANG Suyan, WANG Xibin, ZHOU Tianfeng, LIU Zhibing, LI Yu, CHEN Jianjun
机械工程学报. 2019, 55 (13): 185-194. doi: 10.3901/JME.2019.13.185
Abstract ( 698 )    PDF(3006KB) ( 467 )
References | Related Articles | Metrics
Analysis of Surface Damage Formation Mechanism in Milling of CFRPs
WANG Fuji, WANG Dong, YIN Junwei, YANG Fan, ZHAO Meng, WANG Zegang
机械工程学报. 2019, 55 (13): 195-204. doi: 10.3901/JME.2019.13.195
Abstract ( 715 )    PDF(3688KB) ( 577 )
References | Related Articles | Metrics
Material Removal Behavior in Ultrasonic Assisted Grinding of SiC Ceramics
CAO Jianguo, ZHANG Qinjian
机械工程学报. 2019, 55 (13): 205-211. doi: 10.3901/JME.2019.13.205
Abstract ( 883 )    PDF(3469KB) ( 1019 )
References | Related Articles | Metrics
Effect of Flow Channel Structure on Performance of Pressurized Internal-cooling Slotted Grinding Wheels
PENG Ruitao, LIU Kaifa, HUANG Xiaofang, JIANG Haojian, ZHANG Shan
机械工程学报. 2019, 55 (13): 212-223. doi: 10.3901/JME.2019.13.212
Abstract ( 660 )    PDF(7189KB) ( 488 )
References | Related Articles | Metrics
3D Finite Element Simulation and Experimentation of Residual Stress in Longitudinal Torsional Ultrasonic Assisted Milling
NIU Ying, JIAO Feng, ZHAO Bo, WANG Xiaobo
机械工程学报. 2019, 55 (13): 224-232. doi: 10.3901/JME.2019.13.224
Abstract ( 749 )    PDF(1822KB) ( 544 )
References | Related Articles | Metrics