Journal of Mechanical Engineering

2019, Volume 55 Issue 14 Publication:20 July 2019
Previous Issue Next Issue
Wear Status Recognition for Milling Cutter Based on Compressed Sensing and Noise Stacking Sparse Auto-encoder
LI Hongkun, HAO Baitian, DAI Yuebang, YANG Rui
机械工程学报. 2019, 55 (14): 1-10. doi: 10.3901/JME.2019.14.001
Abstract ( 1106 )    PDF(1058KB) ( 716 )
References | Related Articles | Metrics
Research on Frequency Adaptive Optimization Method of Electromagnetic Acoustic Testing
ZHENG Yang, ZHOU Jinjie, ZHANG Zongjian, TAN Jidong
机械工程学报. 2019, 55 (14): 11-18. doi: 10.3901/JME.2019.14.011
Abstract ( 893 )    PDF(667KB) ( 466 )
References | Related Articles | Metrics
Theoretical and Experimental Studies on 3D Vibration Measurement Based on Displacement-sensitive Fringe Pattern

ZHONG Jianfeng, ZHONG Shuncong, PENG Zhike
Journal of Mechanical Engineering. 2019, 55 (14): 19-29. doi: 10.3901/JME.2019.14.019
Abstract ( 774 )    PDF(787KB) ( 585 )
References | Related Articles | Metrics
Influence of Plasma Spraying on Interfacial Microstructure and Mechanical Property of Thick Steel/Aluminum Laminated Plate by Hot Rolling
HUANG Huagui, ZHAO Yang, WANG Chao, YAN Meng
机械工程学报. 2019, 55 (14): 30-36. doi: 10.3901/JME.2019.14.030
Abstract ( 717 )    PDF(866KB) ( 420 )
References | Related Articles | Metrics
Numerical Simulation of Al/Mg/Al Composite Plates Fabricated by Explosive Welding in One Stage
WEI Yi, WANG Yongzhen, WANG Wenxian, ZHANG Tingting, YAN Zhifeng
机械工程学报. 2019, 55 (14): 37-42. doi: 10.3901/JME.2019.14.037
Abstract ( 577 )    PDF(1210KB) ( 456 )
References | Related Articles | Metrics
Static Recrystallization Mechanism of LZ50 Steel and Cellular Automata Simulation
SHI Xianzhe, DU Shiwen
机械工程学报. 2019, 55 (14): 43-52. doi: 10.3901/JME.2019.14.043
Abstract ( 514 )    PDF(1441KB) ( 453 )
References | Related Articles | Metrics
Hybrid Preheating Method for Lithium-ion Battery Used in Cold Environment
XIONG Rui, WANG Kan, GUO Shanshan
机械工程学报. 2019, 55 (14): 53-59. doi: 10.3901/JME.2019.14.053
Abstract ( 859 )    PDF(558KB) ( 518 )
References | Related Articles | Metrics
Design, Analysis and Optimization of Linear Bundled Separation Device for Launch Vehicle
BI Xiangjun, CHEN Bingquan, WU Hao, WANG Lipeng, JIANG Liangliang, WANG Bo, ZHOU Caihua
机械工程学报. 2019, 55 (14): 60-68. doi: 10.3901/JME.2019.14.060
Abstract ( 661 )    PDF(1170KB) ( 440 )
References | Related Articles | Metrics
Flow-induced Noise Behaviour around High-speed Train Wheelsets
ZHU Jianyue, LEI Zhenyu, LI Li
机械工程学报. 2019, 55 (14): 69-79. doi: 10.3901/JME.2019.14.069
Abstract ( 714 )    PDF(1330KB) ( 405 )
References | Related Articles | Metrics
Study on Bolt Load Test and Fatigue Damage of Brake Discs of EMU
FAN Tongbai, REN Zunsong, WANG Wenjing, WANG Xi, ZOU Hua
机械工程学报. 2019, 55 (14): 80-87. doi: 10.3901/JME.2019.14.080
Abstract ( 766 )    PDF(1102KB) ( 492 )
References | Related Articles | Metrics
Structural Design and Dynamics Performance Urban Light Rail Vehicles Bogies with Bolster
ZHOU Cheng, CHI Maoru, LIANG Shulin, WANG Xiangtao, ZHOU Fei, WU Xingwen
机械工程学报. 2019, 55 (14): 88-95. doi: 10.3901/JME.2019.14.088
Abstract ( 551 )    PDF(581KB) ( 404 )
References | Related Articles | Metrics
Optimization and Experimental Analysis of a Segmented Rotor SRM of BSG for HEVs
SUN Xiaodong, ZHOU Zhuicai, CHEN Long, YANG Zebin, HAN Shouyi, XUE Zhengwang
机械工程学报. 2019, 55 (14): 96-103. doi: 10.3901/JME.2019.14.096
Abstract ( 677 )    PDF(738KB) ( 317 )
References | Related Articles | Metrics
Wheel-rail Friction Work Calculation Method and Rail Wear Prediction Based on Finite Element Method
ZHANG Jun, LIU Jiahuan, WANG Xueping, MA He
机械工程学报. 2019, 55 (14): 104-111. doi: 10.3901/JME.2019.14.104
Abstract ( 756 )    PDF(818KB) ( 555 )
References | Related Articles | Metrics
Comparison of Wheel/Rail Dynamic Interaction of Two Kinds of Metro Vehicles with Different Driving Mode
YANG Yunfan, TAO Gongquan, WU Lei, WEN Zefeng
机械工程学报. 2019, 55 (14): 112-121. doi: 10.3901/JME.2019.14.112
Abstract ( 645 )    PDF(716KB) ( 506 )
References | Related Articles | Metrics
Numerical Simulation on Required Capacity of MT-2 Vehicle Draft Gear under Shunting Impact Condition
ZHAO Xubao, WEI Wei, ZHANG Jun, MA Yongfeng
机械工程学报. 2019, 55 (14): 122-131. doi: 10.3901/JME.2019.14.122
Abstract ( 576 )    PDF(667KB) ( 372 )
References | Related Articles | Metrics
Anti-kink System and Dynamics Simulation of Low Floor Tram
WANG Xiaochao, LU Zhenggang
机械工程学报. 2019, 55 (14): 132-139. doi: 10.3901/JME.2019.14.132
Abstract ( 642 )    PDF(540KB) ( 365 )
References | Related Articles | Metrics
Thermophysical Parameter Measurements for Lithium-Ion Batteries: A Review
CHENG Ximing, TANG Yu, WANG Shouqun
机械工程学报. 2019, 55 (14): 140-150. doi: 10.3901/JME.2019.14.140
Abstract ( 608 )    PDF(521KB) ( 496 )
References | Related Articles | Metrics
Simulation on Aerodynamic Performance of a Variable-pitch Axial Flow Fan with Chordwise Swept Blades
LI Chunxi, FAN Fuwei, LIU Hongkai, YE Xuemin
机械工程学报. 2019, 55 (14): 151-159. doi: 10.3901/JME.2019.14.151
Abstract ( 694 )    PDF(1225KB) ( 523 )
References | Related Articles | Metrics
Experiment on Heat Transfer Characteristics of Radial Groove Surface Spray Cooling
ZHANG Wei, QI Hang, ZHANG Yadong, SUN Xiaoming
机械工程学报. 2019, 55 (14): 160-168. doi: 10.3901/JME.2019.14.160
Abstract ( 613 )    PDF(718KB) ( 386 )
References | Related Articles | Metrics
Positioning of Autonomous Modeling Manipulator for Deformed Surface Using Moments-based Visual Servoing
PENG Weixing, WANG Yaonan, ZENG Kai, WU Haotian
机械工程学报. 2019, 55 (14): 169-177. doi: 10.3901/JME.2019.14.169
Abstract ( 712 )    PDF(1027KB) ( 504 )
References | Related Articles | Metrics
Hysteresis Nonlinear Analysis and Its Compensation Method of MFC Actuator
LIU Kuan, ZHAO Zishu, WU Wenhua, ZHOU Wenya, WANG Xiaoming
机械工程学报. 2019, 55 (14): 178-185. doi: 10.3901/JME.2019.14.178
Abstract ( 562 )    PDF(630KB) ( 451 )
References | Related Articles | Metrics
Research on Digital Prototypes of Serial Hydraulic Excavators
GE Lei, DONG Zhixin, LI Yunhua, QUAN Long, ZHANG Xiaogang, ZHAO Bin
机械工程学报. 2019, 55 (14): 186-196. doi: 10.3901/JME.2019.14.186
Abstract ( 731 )    PDF(1445KB) ( 693 )
References | Related Articles | Metrics
M/M/c/N Queue with Multiple-priority and Abandonment
YIN Mingang, TIAN Gang, SUN Zhili, SUN Yao
机械工程学报. 2019, 55 (14): 197-205. doi: 10.3901/JME.2019.14.197
Abstract ( 551 )    PDF(692KB) ( 337 )
References | Related Articles | Metrics
Conveyor's Buffer Length Modeling and Optimization of Multi-Shuttle System
QIN Yiping, WANG Yanyan, WU Yaohua, HU Jinchang
机械工程学报. 2019, 55 (14): 206-214. doi: 10.3901/JME.2019.14.206
Abstract ( 545 )    PDF(724KB) ( 470 )
References | Related Articles | Metrics
Research of Queuing Network Modelling of Human-machine Interference by Considering Human Error
KONG Fansen, BAI Xiaogang, LI Congshuang, LU Junrui
机械工程学报. 2019, 55 (14): 215-224. doi: 10.3901/JME.2019.14.215
Abstract ( 513 )    PDF(779KB) ( 525 )
References | Related Articles | Metrics
Speed Governing Performance of the Permanent Magnetic Coupler under Centrifugal Load
WU Ming, MA Yushun, KUANG Jun, HUANG Xiaobing
机械工程学报. 2019, 55 (14): 225-232. doi: 10.3901/JME.2019.14.225
Abstract ( 454 )    PDF(763KB) ( 438 )
References | Related Articles | Metrics