Journal of Mechanical Engineering ›› 2019, Vol. 55 ›› Issue (13): 53-63.doi: 10.3901/JME.2019.13.053
Previous Articles Next Articles
CAO Shuqian1,2, HOU Lanlan1,2
Received:
2018-07-19
Revised:
2018-11-28
Online:
2019-07-05
Published:
2019-07-05
CLC Number:
CAO Shuqian, HOU Lanlan. A Review of Design and Dynamics for the GTF Aero-engine[J]. Journal of Mechanical Engineering, 2019, 55(13): 53-63.
[1] WILFERT G, KRIEGL B, SCHEUGENPFLUG H. Clean-validation of a high efficient low NOx core, a GTF high speed turbine and an integration of a recuperator in an environmental friendly engine concept[C]//41st AIAA/ASME/SAE/ASEE Joint Propulsion Conference, 2005, 4195. [2] LARSSON L, GRÖNSTEDT T. Conceptual design and mission analysis for a geared turbofan and an open rotor configuration[C]//Proceedings of ASME Turbo Expo 2011 GT2011 June 6-10, 2011, Vancouver, Canada. [3] 张德志,张锦绣,王凤. 齿轮驱动涡扇发动机结构设计特点分析[J]. 航空发动机, 2011, 37(4):1-4. ZHANG Dezhi, ZHANG Jinxiu, WANG Feng. Analysis of structural design characteristics for geared turbofan engine[J]. Aeroengine, 2011, 37(4):1-4. [4] BUYUKATAMAN K, WILTON S. Gearbox system design for ultra-high bypass engines[C]//AIAAISAEIASMEIASEE 26th Joint Propulsion Conference, Orlando, 1990:AIAA-90-2152. [5] 冯金,覃坤,王丹. 星型风扇驱动齿轮箱概念设计探讨[J]. 航空工程进展, 2015, 6(4):490-495. FENG Jin, QIN Kun, WANG Dan. Discussion on conceptual design of fan drive gear system with star gears[J]. Advances in Aeronautical Science and Engineering, 2015, 6(4):490-495. [6] 侯明曦,李锦花,张茂强. GTF发动机行星齿轮传动系统设计技术研究[J]. 航空发动机, 2014, 40(2):61-64. HOU Mingxi, LI Jinhua, ZHANG Maoqiang, et al. Research on design technology of planetary gear system for geared turbofan engine[J]. Aeroengine, 2014, 40(2):61-64. [7] 陈聪慧,信琦. 风扇齿轮驱动系统的概念设计[J]. 航空科学技术, 2011(4):8-11. CHEN Conghui, XIN Qi. Conceptual design of fan gear drive system[J]. Aeronautical Science & Technology, 2011(4):8-11. [8] 孟祥战. 航空发动机星型齿轮传动系统优化设计[D]. 南京:南京航空航天大学, 2004. MENG Xiangzhan. Optimization design of star gear transmission system of aero-engine[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2004. [9] KURZKE J. Fundamental differences between conventional and geared turbofans[C]//Proceedings of ASME Turbo Expo 2009:Power for Land, Sea and Air GT2009 June 8-12, 2009, Orlando, Florida, USA. [10] ZHANG Jinhuan, ZHOU Zhenggui, WEI Wenqiang. Aero dynamic design of an ultra-low rotating speed geared fan[J]. Aerospace Science and Technology, 2017, 63:73-81. [11] KAPLAN B, NICKE E, VOSS C. Design of a highly efficient low-noise fan for ultrahigh bypass engines[J]. ASME Turbo Expo 2006:Power for Land Sea and Air, 2006, 1:1-8. [12] BIANCHI, CORSINI A, RISPOLI F. Experimental aeroacoustic studies on improved tip geometries for passive noise signature control in low-speed axial fan[C]//ASME Paper No. GT2008-51057:863-875. [13] KAHRAMAN A. Natural modes of planetary gear trains[J]. Journal of sound and vibration, 1994, 73(1):125-130. [14] KAHRAMAN A. Load sharing characteristica of planetary transmissions[J]. Mechanism and Machine Theory, 1994, 29:1151-1165. [15] KAHRAMAN A. Planetary gear train dynamics[J]. ASME Journal of Mechanical Design, 1994, 116:713-720. [16] KAHRAMAN A, BLANKENSHIP G W. Planet mesh phasing in epicyclic gear sets[C]//Proc. of International Gearing Conference, Newcastle, 1994:99-104. [17] GUO Y, PARKER R G. Purely rotational model and vibration modes of compound planetary gears[J]. Mechanism and Machine Theory, 2010, 45(3):365-377. [18] BAHK C J, PARKER R G. Nonlinear dynamics of planetary gears with equal planet spacing[C]//ASME 2007 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2007:603-616. [19] 王浩飞. 基于齿面摩擦的人字齿行星齿轮传动系统动力学研究[D]. 南京:南京航空航天大学, 2015. WANG Haofei. Dynamic analysis of the double helical planetary gear trains considering tooth friction[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2015. [20] 沈稼耕. 计入啮合相位的人字齿行星齿轮系统动力学研究[D]. 南京:南京航空航天大学, 2014. SHEN Jiageng. Research on dynamics of herringbone planetary gear trains based on mesh phasing[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2014. [21] AMBARISHA V K, PARKER R G. Nonlinear dynamics of planetary gears using analytical and finite element models[J]. Journal of Sound and Vibration, 2007, 302:577-595. [22] GRADU M, LANGENBECK K, BREUNIG B. Planetary gears with improved vibrational behaviour in automatic transmissions[J]. Vdi Berichtenr, 1996:861-879. [23] PARKER R G, AGASHE V, VIJAYAKAR S M. Dynamic response of a planetary gear system using a finite element/contact mechanics model[J]. ASME Journal of Mechanical Design, 2000, 122(10):304-310. [24] 马艳红,曹冲,郝勇,等. 齿轮传动风扇发动机转子系统结构与动力学分析[J]. 航空动力学报, 2015, 30(11):2753-2761. MA Yanhong, CAO Chong, HAO Yong, et al. Structure and dynamics analysis of rotor system in geared turbofan engine[J]. Journal of Aerospace Power, 2015, 30(11):2753-2761. [25] 巫世晶,任辉,朱恩涌. 行星齿轮传动系统动力学研究进展[J]. 武汉大学学报, 2010, 43(3):398-403. WU Shijing, REN Hui, ZHU Enyong, et al. Research advances for dynamics of planetary gear trains[J]. Engineering Journal of Wuhan University, 2010, 43(3):398-403. [26] LIN J, PARKER R G. Analytical characterization of the unique properties of planetary gear free vibration[J]. ASME Journal of Vibration and Acoustics, 1999, 121(3):316-321. [27] PARKER R G. A physical explanation for the effectiveness of planet phasing to suppress planetary gear vibration[J]. Journal of Sound and Vibration, 2000, 236(4):561-573. [28] 杨富春,周晓军,郑津洋. 复式行星齿轮传动系统综合动力学模型及振动特性研究[J]. 振动与冲击, 2011, 30(8):144-148. YANG Fuchun, ZHOU Xiaojun, ZHENG Jinyang. Dynamic model and vibration characteristics of complex compound planetary gear set[J]. Journal of Vibration and Shock, 2011, 30(8):144-148. [29] 孙涛, 沈允文. 行星齿轮传动非线性动力学方程求解与动态特性分析[J]. 机械工程学报, 2002, 38(3):11-15. SUN Tao, SHEN Yunwen. Study on nonlinear dynamic behavior of planetary gear train solution and dynamic behavior analysis[J]. Chinese Journal of Mechanical Engineering, 2002, 38(3):11-15. [30] 孙涛, 胡海岩. 基于离散傅里叶变换与谐波平衡法的行星齿轮系统非线性动力学分析[J]. 机械工程学报, 2001, 38(11):58-61. SUN Tao, HU Haiyan. Nonlinear dynamics of planetary gear transmission by harmonic balance method based on DFT[J]. Chinese Journal of Mechanical Engineering, 2001, 38(11):58-61. [31] BAHK C J, PARKER R G. Analytical solution for the nonlinear dynamics of planetary gears[J]. Journal of Computational and Nonlinear Dynamics, 2011, 6:1-15. [32] LIU G, PARKER R G. Impact of tooth friction and its bending effect on gear dynamics[J]. Journal of Sound and Vibration, 2009, 320:1039-1063. [33] 朱恩涌,巫世晶,王晓笋,等. 含摩擦力的行星齿轮传动系统非线性动力学模型[J]. 振动与冲击, 2010, 29(8):217-220. ZHU Enyong, WU Shijing, WANG Xiaoshun, et al. Study on nonlinear dynamic model of planetary gear train sets with friction force[J]. Journal of Vibration and Shock, 2010, 29(8):217-220. [34] GUO Y, PARKER R G. Dynamic analysis of planetary gears with bearing clearance[J]. Journal of Computational and Nonlinear Dynamics, 2012, 7:041002-1-15. [35] KAHARMAN A, SINGH R. Nonlinear dynamics of a geared rotor-bearing system with multiple clearances[J]. Journal of Sound and Vibration, 1991, 144(3):469-506. [36] HIDAKA T, TERAUCHI Y, NAGANUM K. Dynamic behavior of planetary gear-1st report:Load distribution[J]. Bull. JSME, 1976, 19(132):690-698. [37] HIDAKA T, TERAUCHI Y, DOHI K. On the relation between the run out errors and the motion of the center of sun gear in a stoeckicht planetary gear[J]. Bulletin of JSME, 1979, 22(167):748-754. [38] HIDAKA T, TERAUCHI Y, NAGANUM K. Dynamic behavior of planetary gear-7th report:Influence of the thickness of ring gear[J]. Bull. JESE, 1979, 22:1142-1149. [39] MÜLLER H W. Epicyclic drive trains[M]. Detroit:Wayne State University Press, 1982. [40] BODAS A, KAHRAMAN A. Influence of carrier and gear manufacturing errors on the static load sharing behavior of planetary gear sets[J]. The Japan Society of Mechanical engineers International Journal:Series C, 2004, 47(3):908-915. [41] KAHRAMAN A. Load sharing characteristics of planetary transmissions[J]. Mechanism and Machine Theory, 1994, 29(8):1151-1165. [42] SINGH A. Application of a system level model to study the planetary load sharing behavior[J]. Journal of Mechanical Design, 2005, 127(12):469-476. [43] SINGH A. Load sharing behavior in epicyclic gears:Physical explanation and generalized formulation[J]. Mechanism and Machine Theory, 2010, 45(3):511-530. [44] 莫帅,张以都,吴琼,等. GTF发动机星形传动系统多分流均载机理研究[J]. 航空动力学报, 2016, 31(3):764-768. MO Shuai, ZHANG Yidu, WU Qiong, et al. Research on load sharing mechanism of star gear trains for GTF engine[J]. Journal of Aerospace Power, 2016, 31(3):764-768. [45] MO Shuai, ZHANG Yidu, WU Qiong. Research on multiple-split load sharing of two-stage star gearing system in consideration of displacement compatibility[J]. Mechanism and Machine Theory, 2015, 88:1-15. [46] MO Shuai, ZHANG Yidu, WU Qiong. Load sharing behavior of star gearing reducer for geared turbofan engine[J]. Chinese Journal of Mechanical Engineering, 2017, 30(4):796-803. [47] 尹素格. 船用星型齿轮减速器的均载与动态特性研究[D]. 哈尔滨:哈尔滨工程大学, 2011. Yin Suge. Research on load sharing and dynamic characteristics of marine star gear reducer[D]. Harbin:Harbin Engineering University, 2011. [48] 袁擎宇. 星型齿轮传动系统均载分析方法的研究[D].南京:南京航空航天大学, 2004. YUAN Qingyu. The analysis method on load sharing of star gear transmission system[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2004. [49] 任菲. 考虑制造误差的人字齿轮行星传动系统动力学特性及动态均载研究[D]. 重庆:重庆大学, 2015. REN Fei. Study on dynamic characteristics and dynamic load sharing of a herringbone planetary gear with manufacturing errors[D]. Chongqing:Chongqing University, 2015. [50] 鲍和云. 两级星型齿轮传动系统分流特性及动力学研究[D]. 南京:南京航空航天大学, 2006. BAO Heyun. Study on load-split characteristics and dynamics of two-stage star gear trains[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2006. [51] GUO Y, KELLER J, LACAVA W. Combined effects of gravity, bending moment, bearing clearance, and input torque on wind turbine planetary gear load sharing[C]//American Gear Manufacturers Association Fall Technical Meeting, 2012, Dearborn, Michigan. 2012:1-19. [52] VELEX P, PICHON V, WITTMAN R. Dynamic behavior of epicyclic trains-experiment and analyses[C]//Proceedings of the International Gear Conference, Newcastle, 1994:265-270. [53] PARKER R G, ERICSON T M. OSU planetary gear vibration experiments[EB/OL]. http:/www.mecheng.osu. edu/vi-brations/dynamicsfiles, 2009. [54] INALPOLAT M, KAHRAMAN A. Atheoretical and experimental investigation of modulation sidebands of planetary gear sets[J]. Journal of Sound and Vibration, 2009, 323:677-696. [55] KARRAY M, CHAARI F, RINCON A F D, et al. An experimental investigation of the dynamic behavior of planetary gear set[J]. Design and Modeling of Mechanical Systems, 2013, 25:199-206. [56] 肖正明,秦大同,尹志宏. 多级行星齿轮系统耦合动力学分析与试验研究[J]. 机械工程学报, 2012, 48(23):51-58. XIAO Zhengming, QIN Datong, YIN Zhihong. Multi-stage planetary gears dynamic coupling analysis and experimental investigation[J]. Journal of Mechanical Engineering, 2012, 48(23):51-58. [57] LEI Yaguo, HAN Dong, LIN Jing, et al. Planetary gearbox fault diagnosis using an adaptive stochastic resonance method[J]. Mechanical Systems and Signal Processing, 2013, 38:113-124. [58] LEI Yaguo, KONG Dong, LIN Jing, et al. Fault detection of planetary gearboxes using new diagnostic parameters[J]. Measurement Science and Technology, 2012, 23:1-10. [59] KANG M R, KAHRAMAN A. An experimental and theoretical study of the dynamic behavior of double-helical gear sets[J]. Journal of Sound and Vibration, 2015, 350:11-29. [60] 卜忠红,刘更,吴立言. 滑动轴承支承人字齿轮行星传动固有特性分析[J]. 机械工程学报, 2011, 47(1):80-88. BU Zhonghong, LIU Geng, WU Liyan. Natural characteristics analysis on herringbone planetary gear trains with slide bearing support[J]. Journal of Mechanical Engineering, 2011, 47(1):80-88. [61] BU Zhonghong, LIU Geng, WU Liyan. Modal analyses of herringbone planetary gear train with journal bearings[J]. Mechanism and Machine Theory, 2012, 54:99-115. [62] CHAARI F, FAKHFAKH T, HADDAR M. Dynamic analysis of a planetary gear failure caused by tooth pitting and cracking[J]. Journal of Failure Analysis and Prevention, 2006, 6(2):73-78. [63] 王况,科盛,左明健. 一种基于行星齿轮箱复合运动的故障诊断指标[J]. 振动与冲击, 2016, 35(23):217-221. WANG Kuang, WANG Kesheng, ZUO Mingjian. A fault diagnosis index based on complex movement of planetary gearbox[J]. Journal of Vibration and Shock, 2016, 35(23):217-221. |
[1] | TAO Liang, TANG Yu, LI Yuanqiang, ZHANG Dashan, ZHANG Xiaolong. Design of Intelligent Tire Development Platform with Multiple In-tire Sensors and Research on Tire Cornering Test [J]. Journal of Mechanical Engineering, 2024, 60(8): 245-255. |
[2] | HUANG Gongrui, ZHU Yangli, XIONG Jun, WANG Xing, LI Wen, CHEN Haisheng. Review on the Axial Turbine Long-blade Stage Characteristics under Off-design Conditions [J]. Journal of Mechanical Engineering, 2024, 60(8): 271-290. |
[3] | REN Shan, WANG Jin, ZHAO Xin, ZHANG Yingfeng. “Doubly-fed” Manufacturing Service of Intelligent Design and Preventive Maintenance for Complex Products [J]. Journal of Mechanical Engineering, 2024, 60(6): 127-136. |
[4] | ZHANG Fengli, ZHANG Rongrong, LUO Qiuli, ZHANG Yadong, LI Bing, GUO Hui. Research on the Aerodynamic Noise Mechanism and Noise Reduction of SUV Roof Hollow Spoiler [J]. Journal of Mechanical Engineering, 2024, 60(6): 398-408. |
[5] | ZHANG Liyuan, YANG Jinbo, LI Ao, YANG Qingkai, XU Guangkui. Review on Configuration Design and Control of Tensegrity Spherical Robots [J]. Journal of Mechanical Engineering, 2024, 60(5): 1-18. |
[6] | ZHAO Ping, ZHANG Yating, CHENG Yue, XU Hongwei, ZI Bin. Multi-task Trajectory Synthesis Method of Single-DOF Stephenson Mechanisms Based on Sensitivity Analysis [J]. Journal of Mechanical Engineering, 2024, 60(5): 59-69. |
[7] | MENG Yuan, SHI Baojun, ZHANG Dequan. Research and Improvement of Kriging-HDMR Modeling Method [J]. Journal of Mechanical Engineering, 2024, 60(5): 249-263. |
[8] | ZHU Shangshang, YU Huiling, DONG Yenan, LUO Shijian. A Product Creative Design Method That Incorporates the Creation of Consumer Groups [J]. Journal of Mechanical Engineering, 2024, 60(5): 276-287. |
[9] | ZHAO Xingyu, WANG Bo, QUAN Long, GE Lei, ZHOU Xingwei. Design and Characteristics of Independent Metering Control Multi-way Valve with Spool in Series [J]. Journal of Mechanical Engineering, 2024, 60(4): 113-125. |
[10] | GAO Qiang, WANG Jian, ZHANG Yan, ZHENG Xuyang, LÜ Hao, YIN Guodong. Topology Optimization Approaches and Its Application and Prospect in Transportation Engineering [J]. Journal of Mechanical Engineering, 2024, 60(4): 369-390. |
[11] | ZONG Huaizhi, AI Jikun, ZHANG Junhui, JIANG Lei, TAN Shujie, LIU Yuxian, SU Qi, XU Bing. Lightweight Design of Limb Leg Units for Hydraulic Quadruped Robots by Topology Optimization and Lattice Filling [J]. Journal of Mechanical Engineering, 2024, 60(4): 420-429. |
[12] | XIE Chao, ZHANG Enjie, YAN Biao, GAO Feng, YANG Jinping, FANG Guangqiang, WANG Zhiyi. Configuration Design and Demonstration of a Spaceborne Deployable Membrane Array Antenna [J]. Journal of Mechanical Engineering, 2024, 60(3): 11-27. |
[13] | LIU Xiaofei, WAN Bo, WANG Yu, LI Mingyu, ZHAO Yongsheng. Design, Analysis and Performance Optimization of a Novel Super-redundantly Actuated Hybrid Robot [J]. Journal of Mechanical Engineering, 2024, 60(3): 55-67. |
[14] | DU Yanbin, WANG Aoting, HE Kun. Tooth Contact Analysis of Helical Gears with Longitudinal Modification Considering Twist Errors [J]. Journal of Mechanical Engineering, 2024, 60(3): 143-154. |
[15] | LÜ Liye, LU Yujun, WANG Shuo, LIU Yin, LI Kunpeng, SONG Xueguan. Survey and Prospect of Surrogate Model Technique and Application [J]. Journal of Mechanical Engineering, 2024, 60(3): 254-281. |
Viewed | ||||||
Full text |
|
|||||
Abstract |
|
|||||