Journal of Mechanical Engineering

2018, Volume 54 Issue 6 Publication:20 March 2018
Previous Issue Next Issue
High Cycle Fatigue Behavior Evaluation of Q235 Steel Based on Energy Dissipation

FAN Junling
Journal of Mechanical Engineering. 2018, 54 (6): 1-9. doi: 10.3901/JME.2018.06.001
Abstract ( 1103 )    PDF(337KB) ( 451 )
References | Related Articles | Metrics
Experimental Investigations on the Polishing Forces Characteristics of Dynamic Magnetic Field Magnetorheological Effect Polishing Pad
PAN Jisheng, YU Peng, YAN Qiusheng
机械工程学报. 2018, 54 (6): 10-17. doi: 10.3901/JME.2018.06.010
Abstract ( 873 )    PDF(468KB) ( 423 )
References | Related Articles | Metrics
Dynamic Contact Behaviors of Precision H-type Air Bearings during Startup Process
ZHANG Chuanwei, LI Dongsheng, GU Le, WANG Liqin, SUN Tao
机械工程学报. 2018, 54 (6): 18-24. doi: 10.3901/JME.2018.06.018
Abstract ( 663 )    PDF(498KB) ( 344 )
References | Related Articles | Metrics
Influence of Modulation Ratio on the Tribological and Electrochemical Behaviors of Multilayer DLC Coatings
CUI Mingjun, REN Siming, FAN Xiaoqiang, ZHANG Guangan, WANG Liping, XUE Qunji
机械工程学报. 2018, 54 (6): 25-31. doi: 10.3901/JME.2018.06.025
Abstract ( 590 )    PDF(418KB) ( 346 )
References | Related Articles | Metrics
High-temperature Thermal Stability and Tribological Property of TiSiN/AlCrN Nano-multilayer Coatings
LI Haixu, TANG Peng, WU Zhengtao, DAI Wei, WANG Qimin, QI Zhengbing
机械工程学报. 2018, 54 (6): 32-40. doi: 10.3901/JME.2018.06.032
Abstract ( 633 )    PDF(872KB) ( 436 )
References | Related Articles | Metrics
Friction and Wear Properties of a Long-term Storage WS₂-Ag Films Prepared by IBAD Technology
QIU Weiwei, JIN Jie, LÜ Lili, MENG Xiangyu, MENG Hui
机械工程学报. 2018, 54 (6): 41-47. doi: 10.3901/JME.2018.06.041
Abstract ( 612 )    PDF(576KB) ( 240 )
References | Related Articles | Metrics
Dynamic Performance of Heavy-haul Electric Locomotive Considering Effect of Gear Transmission System
WANG Zichao, ZHAI Wanming, CHEN Zaigang, ZHANG Jie, WANG Kaiyun
机械工程学报. 2018, 54 (6): 48-54. doi: 10.3901/JME.2018.06.048
Abstract ( 745 )    PDF(481KB) ( 389 )
References | Related Articles | Metrics
Modelling and Investigations of 3D Colliding Vehicles and Moving Tracks
YANG Chao, LI Qiang, XIAO Shoune
机械工程学报. 2018, 54 (6): 55-61. doi: 10.3901/JME.2018.06.055
Abstract ( 706 )    PDF(252KB) ( 373 )
References | Related Articles | Metrics
A New Method of Parameters Identification for Magnetorheological Damper Model
LIU Yongqiang, YANG Shaopu, LIAO Yingying
机械工程学报. 2018, 54 (6): 62-68. doi: 10.3901/JME.2018.06.062
Abstract ( 809 )    PDF(308KB) ( 382 )
References | Related Articles | Metrics
Impact Analysis of Multi Hanging Equipment on High Speed Train Ride Comfort
HE Xiaolong, ZHANG Limin, LU Liantao
机械工程学报. 2018, 54 (6): 69-77. doi: 10.3901/JME.2018.06.069
Abstract ( 592 )    PDF(678KB) ( 299 )
References | Related Articles | Metrics
Study on Reducing Wear of Straddle-type Monorail Trains' Running Wheel Tires
WANG Guolin, ZHENG Zhou, ZHANG Song, LI Kaiqiang, YANG Jian, ZHOU Haichao
机械工程学报. 2018, 54 (6): 78-85. doi: 10.3901/JME.2018.06.078
Abstract ( 829 )    PDF(354KB) ( 309 )
References | Related Articles | Metrics
Vibration Characteristics and Stability of the Longitudinal Coupled Track under Temperature Force
LIU Xiaokai, XIAO Jieling, ZHAO Chunguang, QUAN Yi, LIU Xueyi
机械工程学报. 2018, 54 (6): 86-92. doi: 10.3901/JME.2018.06.086
Abstract ( 676 )    PDF(347KB) ( 235 )
References | Related Articles | Metrics
Analysis of Temperature Field of Train Tread Braking Based on Rotating Heat Source Method and Uniformly Distributed Heat Source Method
ZHANG Jinyu, YU Dalian, LIN Peng
机械工程学报. 2018, 54 (6): 93-101. doi: 10.3901/JME.2018.06.093
Abstract ( 683 )    PDF(447KB) ( 248 )
References | Related Articles | Metrics
Defect Detection Based on Contourlet-based Shape from Shading
HU Kun, ZHANG Shuyou, ZHAO Xinyue, AO Zhigang
机械工程学报. 2018, 54 (6): 102-109. doi: 10.3901/JME.2018.06.102
Abstract ( 761 )    PDF(414KB) ( 263 )
References | Related Articles | Metrics
Measurement of Surface Acoustic Wave Velocity Curves of Silicon Crystal by Ultrasonic Method
SONG Guorong, HONG Guangfu, LU Dong, LÜ Yan, HE Cunfu, WU Bin
机械工程学报. 2018, 54 (6): 110-117. doi: 10.3901/JME.2018.06.110
Abstract ( 553 )    PDF(521KB) ( 256 )
References | Related Articles | Metrics
Method of Compressed Sensing for Mechanical Vibration Signals Based on Double Sparse Dictionary Model
GUO Junfeng, SHI Bin, LEI Chunli, WEI Xingchun, LI Haiyan
机械工程学报. 2018, 54 (6): 118-127. doi: 10.3901/JME.2018.06.118
Abstract ( 757 )    PDF(372KB) ( 657 )
References | Related Articles | Metrics
Load Calibration Test and Multiple Linear Regression Analysis for Hydraulic Pipeline Fittings
BIN Shibo, XIONG Yaozhi, GAO Ting, WEN Zhisheng
机械工程学报. 2018, 54 (6): 128-132. doi: 10.3901/JME.2018.06.128
Abstract ( 571 )    PDF(286KB) ( 273 )
References | Related Articles | Metrics
Integrity and Modeling of Gear Tooth Forming in the Roll-forming of Gear with Axial Infeed
MA Ziyong, LUO Yuanxin, WANG Yongqin, WANG Yu
机械工程学报. 2018, 54 (6): 133-145. doi: 10.3901/JME.2018.06.133
Abstract ( 593 )    PDF(835KB) ( 386 )
References | Related Articles | Metrics
Effect of Vanadium Content on Toughness in the Coarse-Grained Heat Affected Zone of Ti-V Microalloyed Steels
ZOU Zongyuan, LI Yinxiao
机械工程学报. 2018, 54 (6): 146-153. doi: 10.3901/JME.2018.06.146
Abstract ( 517 )    PDF(669KB) ( 367 )
References | Related Articles | Metrics
Study on the Characteristics and Mechanics of Droplet Transfer in Laser Arc Hybrid Welding Process
XU Chunying, LIU Shuangyu, ZHANG Hong, LI Yanqing, LIU Fengde
机械工程学报. 2018, 54 (6): 154-161. doi: 10.3901/JME.2018.06.154
Abstract ( 1059 )    PDF(429KB) ( 414 )
References | Related Articles | Metrics
Effect of Al-Si Coating on Microstructure and Properties of 22MnB5 Steel Laser Welded Joint
CHEN Xiaming, WANG Xiaonan, SUN Qian, ZHANG Min, CHEN Changjun, DI Hongshuang
机械工程学报. 2018, 54 (6): 162-167. doi: 10.3901/JME.2018.06.162
Abstract ( 733 )    PDF(604KB) ( 372 )
References | Related Articles | Metrics
Study on Variable Pitch Strategy of VAWT Based on Double Multiple Stream Tubes Model
ZHAO Zhenzhou, YAN Chang, WANG Tongguang, XU Bofeng, ZENG Guanyu
机械工程学报. 2018, 54 (6): 168-174. doi: 10.3901/JME.2018.06.168
Abstract ( 607 )    PDF(288KB) ( 348 )
References | Related Articles | Metrics
Simulation and Experimental Verification of a 13 W@80 K High Capacity Pulse Tube Cryocooler to be Used in Space
WANG Nailiang, ZHAO Miguang, CHEN Houlei, LIANG Jingtao, CAI Jinghui
机械工程学报. 2018, 54 (6): 175-181. doi: 10.3901/JME.2018.06.175
Abstract ( 542 )    PDF(298KB) ( 231 )
References | Related Articles | Metrics
Modeling of Tube Rupture Process of Boilers
LIU Fuguo, ZHOU Xingang, JIANG Bo
机械工程学报. 2018, 54 (6): 182-190. doi: 10.3901/JME.2018.06.182
Abstract ( 620 )    PDF(339KB) ( 234 )
References | Related Articles | Metrics
Time-selective Integrated Scheduling Algorithm Considering The Compactness of Serial Processes
XIE Zhiqiang, ZHANG Xiaohuan, GAO Yilong, XIN Yu
机械工程学报. 2018, 54 (6): 191-202. doi: 10.3901/JME.2018.06.191
Abstract ( 879 )    PDF(394KB) ( 317 )
References | Related Articles | Metrics
Supplement Energy Control for Hydraulic Compliant Actuator Based on Force Feedback
QI Haitao, LIU Zilong, CHAI Hui
机械工程学报. 2018, 54 (6): 203-214. doi: 10.3901/JME.2018.06.203
Abstract ( 727 )    PDF(496KB) ( 472 )
References | Related Articles | Metrics
Effects of Oil Supply Conditions on Equivalent Damping and Circumferential Position Damping of Squeeze Film Damper
ZHOU Hailun, ZHANG Ming, CHENG Xiaoming, TANG Zhenhuan, CAO Peng
机械工程学报. 2018, 54 (6): 215-223. doi: 10.3901/JME.2018.06.215
Abstract ( 556 )    PDF(524KB) ( 275 )
References | Related Articles | Metrics
Characteristics of a Synthetic Jet Actuator and Its Application on Control of Flow over a Backward Facing Step
ZHANG Zhenhui, LI Dong
机械工程学报. 2018, 54 (6): 224-232. doi: 10.3901/JME.2018.06.224
Abstract ( 643 )    PDF(574KB) ( 265 )
References | Related Articles | Metrics