Journal of Mechanical Engineering

2018, Volume 54 Issue 7 Publication:05 April 2018
Previous Issue Next Issue
Design Analysis and Stiffness Test of a Large Telescopic Deployable Mechanism Joint
XIAO Hang, YANG Qiaolong, REN Shouzhi, LI Long, XU Kun, DING Xilun
机械工程学报. 2018, 54 (7): 1-10. doi: 10.3901/JME.2018.07.001
Abstract ( 1125 )    PDF(460KB) ( 530 )
References | Related Articles | Metrics
Kinematics and Gait Analysis of a Linkage-jointed Wheel-legged Robot
WANG Yandong, TANG Zhao, DAI Jiansheng
机械工程学报. 2018, 54 (7): 11-19. doi: 10.3901/JME.2018.07.011
Abstract ( 1098 )    PDF(584KB) ( 706 )
References | Related Articles | Metrics
Optimal Driving Forces Distribution for a Six-parallel-legged Robot Based on Dual Quadratic Programming Method
XIN Guiyang, ZHONG Guoliang, WANG Hengsheng, DENG Hua
机械工程学报. 2018, 54 (7): 20-27. doi: 10.3901/JME.2018.07.020
Abstract ( 896 )    PDF(361KB) ( 720 )
References | Related Articles | Metrics
Geometric Constraint and Mobility Analysis of a Reconfigurable Parallel Mechanism
WANG Bing, FANG Yuefa
机械工程学报. 2018, 54 (7): 28-37. doi: 10.3901/JME.2018.07.028
Abstract ( 910 )    PDF(481KB) ( 744 )
References | Related Articles | Metrics
EIH Based Calibration Method for Assembly Robot
LI Bing, FU Weiping, WANG Wen, YANG Shiqiang
机械工程学报. 2018, 54 (7): 38-44. doi: 10.3901/JME.2018.07.038
Abstract ( 953 )    PDF(322KB) ( 478 )
References | Related Articles | Metrics
Kinematic Analysis and Dimensional Synthesis of 2-PUR-PSR Parallel Manipulator
ZHANG Weizhong, XU Lingmin, TONG Junhua, LI Qinchuan
机械工程学报. 2018, 54 (7): 45-53. doi: 10.3901/JME.2018.07.045
Abstract ( 1088 )    PDF(387KB) ( 643 )
References | Related Articles | Metrics
A Calculation Method of Auditory Saliency Map for Representation of Transient Vibration Signal
LI Yungong, DAI Li, LI Guomeng, WANG Bo, WU Wenshou
机械工程学报. 2018, 54 (7): 54-62. doi: 10.3901/JME.2018.07.054
Abstract ( 816 )    PDF(493KB) ( 322 )
References | Related Articles | Metrics
Multi-source Drive/Transmission System Electromechanical Coupling Modeling and Synchronization Characteristic Research
SHU Ruizhi, WEI Jing, QIN Datong, ZHANG Aiqiang, LAI Yubin
机械工程学报. 2018, 54 (7): 63-73. doi: 10.3901/JME.2018.07.063
Abstract ( 791 )    PDF(845KB) ( 406 )
References | Related Articles | Metrics
A Coupled Variable Order Acoustic Wave Envelope Element-finite Element Method for Sound Radiation in Infinite Domain
WU Shaowei, XIANG Yang, ZHANG Bo
机械工程学报. 2018, 54 (7): 74-86. doi: 10.3901/JME.2018.07.074
Abstract ( 683 )    PDF(527KB) ( 246 )
References | Related Articles | Metrics
Rolling Element Bearing Fault Classification Using Improved Stacked De-noising Auto-encoders
HOU Wenqing, YE Ming, LI Weihua
机械工程学报. 2018, 54 (7): 87-96. doi: 10.3901/JME.2018.07.087
Abstract ( 1068 )    PDF(408KB) ( 793 )
References | Related Articles | Metrics
A Method of Reconstruction of Compressed Measuring for Mechanical Vibration Signals Based on K-SVD Dictionary-training Algorithm Sparse Representation
GUO Junfeng, SHI Bin, WEI Xingchun, LI Haiyan, WANG Zhiming
机械工程学报. 2018, 54 (7): 97-106. doi: 10.3901/JME.2018.07.097
Abstract ( 814 )    PDF(366KB) ( 417 )
References | Related Articles | Metrics
Study on Energy Dissipation of Puncture Process by Using Minimally Invasive Surgical Suture Needle

LI Wei, BAO Xiong, ZHOU Zhongrong
Journal of Mechanical Engineering. 2018, 54 (7): 107-113. doi: 10.3901/JME.2018.07.107
Abstract ( 770 )    PDF(482KB) ( 388 )
References | Related Articles | Metrics
Research on Normal Contact Stiffness of Micro-segments Gear Based on Improved Fractal Model
LIU Peng, ZHAO Han, HUANG Kang, CHEN Qi, XIONG Yangshou
机械工程学报. 2018, 54 (7): 114-122. doi: 10.3901/JME.2018.07.114
Abstract ( 741 )    PDF(340KB) ( 443 )
References | Related Articles | Metrics
The Fretting Frictional Contact Analysis of Involute Spline Coupling
TAN Yuanqiang, JIANG Likuan, JIANG Shengqiang, YANG Shiping, LIU Sisi, HU Jianfa
机械工程学报. 2018, 54 (7): 123-130. doi: 10.3901/JME.2018.07.123
Abstract ( 885 )    PDF(537KB) ( 836 )
References | Related Articles | Metrics
Study on Dynamic Micro-elastohydrodynamic Lubrication with Surface Defects of Rollers in Rolling Bearings
LIU Xiaoling, DU Xiao, YANG Peiran
机械工程学报. 2018, 54 (7): 131-138. doi: 10.3901/JME.2018.07.131
Abstract ( 751 )    PDF(368KB) ( 434 )
References | Related Articles | Metrics
Research Progress of Tolerance Analysis Taking into Account the Deformation
LUO Shaomin, XU Cheng
机械工程学报. 2018, 54 (7): 139-151. doi: 10.3901/JME.2018.07.139
Abstract ( 722 )    PDF(21620KB) ( 784 )
References | Related Articles | Metrics
Real-time Generation of Trapezoidal Velocity Profile for Energy Saving in Servomotor Systems
CHEN Han, MU Haihua, ZHU Yu
机械工程学报. 2018, 54 (7): 152-159. doi: 10.3901/JME.2018.07.152
Abstract ( 680 )    PDF(417KB) ( 395 )
References | Related Articles | Metrics
Research of Large Scale SLS Equipment Preheating Strategy Based on Subarea Control
HUANG Xiaokang, TIAN Xiaoyong, TIAN Xiaoyang, CAO Yi, TONG Zhiqiang, LI Dicheng
机械工程学报. 2018, 54 (7): 160-166. doi: 10.3901/JME.2018.07.160
Abstract ( 603 )    PDF(468KB) ( 396 )
References | Related Articles | Metrics
Connotation and Assessment Method for Inherent Energy Efficiency of Machine Tools
TUO Junbo, LIU Fei, ZHANG Hua, LIU Peiji, CAI Wei
机械工程学报. 2018, 54 (7): 167-175. doi: 10.3901/JME.2018.07.167
Abstract ( 739 )    PDF(365KB) ( 377 )
References | Related Articles | Metrics
High Efficiency Hydraulic Model Development of CAP1400 Canned Nuclear Reactor Coolant Pump
ZHOU Fangming, XU Shengli, WANG Xiaofang, SUN Tao, WANG Wei
机械工程学报. 2018, 54 (7): 176-183. doi: 10.3901/JME.2018.07.176
Abstract ( 748 )    PDF(458KB) ( 303 )
References | Related Articles | Metrics
Model-based Axiomatic Design Approach for Complex Engineering Systems
WANG Haoqi, ZHANG Xu, TANG Chengtong
机械工程学报. 2018, 54 (7): 184-198. doi: 10.3901/JME.2018.07.184
Abstract ( 660 )    PDF(687KB) ( 451 )
References | Related Articles | Metrics
The Experimental Study of Axial In-feed Incremental Rolling Process of Spline Shaft
CUI Minchao, ZHAO Shengdun, CHEN Chao, ZHANG Dawei
机械工程学报. 2018, 54 (7): 199-204. doi: 10.3901/JME.2018.07.199
Abstract ( 823 )    PDF(454KB) ( 291 )
References | Related Articles | Metrics
Experiment on the Influence of Features of the Broken Particle Size in a Flutter Ball Mill
LIANG Man, SUN Yi, SHAN Jihong, JIN Xiaohang
机械工程学报. 2018, 54 (7): 205-215. doi: 10.3901/JME.2018.07.205
Abstract ( 726 )    PDF(595KB) ( 932 )
References | Related Articles | Metrics
Basic Research on Conductive Lines by Droplets Jet and Reaction Forming on Fabric Surface
XIAO Yuan, WU Shan, LIU Jinling, SHEN Song, ZHANG Jinrui
机械工程学报. 2018, 54 (7): 216-222. doi: 10.3901/JME.2018.07.216
Abstract ( 692 )    PDF(523KB) ( 282 )
References | Related Articles | Metrics
Computer-aided Design and Preparation for Micro-nano-composite Ceramic Tool Materials
WANG Dong, ZHAO Jun, CAO Yan, XUE Chao
机械工程学报. 2018, 54 (7): 223-232. doi: 10.3901/JME.2018.07.223
Abstract ( 812 )    PDF(399KB) ( 354 )
References | Related Articles | Metrics