Journal of Mechanical Engineering

2018, Volume 54 Issue 5 Publication:05 March 2018
Previous Issue Next Issue
Forward Kinematics of 6-UPS Parallel Manipulators with One Displacement Sensor
LIU Yanli, CHENG Shili, JIANG Surong, YANG Xiaolong, LI Yao, WU Hongtao
机械工程学报. 2018, 54 (5): 1-7. doi: 10.3901/JME.2018.05.001
Abstract ( 1150 )    PDF(309KB) ( 504 )
References | Related Articles | Metrics
Transmission Mode for Curve-face Gear Pair
LIN Chao, CAI Zhiqin, WU Xiaoyong, ZHU Caichao
机械工程学报. 2018, 54 (5): 8-18. doi: 10.3901/JME.2018.05.008
Abstract ( 863 )    PDF(808KB) ( 372 )
References | Related Articles | Metrics
Design and Human-machine Compatibility Analysis of Co-Exos for Upper-limb Rehabilitation

ZHANG Leiyu, LI Jianfeng, LIU Junhui, HOU Zengguang, PENG Liang, WANG Weiqun
Journal of Mechanical Engineering. 2018, 54 (5): 19-28. doi: 10.3901/JME.2018.05.019
Abstract ( 1338 )    PDF(648KB) ( 892 )
References | Related Articles | Metrics
Structural Synthesis of Fully-isotropic Five Degree-of-freedom Hybrid Kinematic Mechanisms
CAO Yi, ZHOU Rui, QIN Youlei, GE Shuyi, DING Rui
机械工程学报. 2018, 54 (5): 29-37. doi: 10.3901/JME.2018.05.029
Abstract ( 697 )    PDF(406KB) ( 396 )
References | Related Articles | Metrics
Tracing Measurement Method for Non-circular Contour of Complex Shafts
LI Jing, GAO Huayu, SHEN Nanyan, DENG Yang, YAN Junfan
机械工程学报. 2018, 54 (5): 38-46. doi: 10.3901/JME.2018.05.038
Abstract ( 809 )    PDF(503KB) ( 518 )
References | Related Articles | Metrics
Novel Decomposition Methodology for Tooth Contact Analysis and Experiment Tests
CAO Xuemei, YANG Bohui, DENG Xiaozhong
机械工程学报. 2018, 54 (5): 47-52. doi: 10.3901/JME.2018.05.047
Abstract ( 750 )    PDF(315KB) ( 409 )
References | Related Articles | Metrics
Influence Mechanisms Between Helical Motion Velocity Coefficient and Cutter Parameters and Characteristics of Tooth Surface Generated by Duplex Helical Method
ZHANG Yu, YAN Hongzhi, ZENG Tao, WANG Zhiyong
机械工程学报. 2018, 54 (5): 53-61. doi: 10.3901/JME.2018.05.053
Abstract ( 742 )    PDF(707KB) ( 544 )
References | Related Articles | Metrics
Design of a 1-DOF Symmetrical Deployable Coupled Mechanism
GAO Huifang, LIU Jingfang, YU Yueqing
机械工程学报. 2018, 54 (5): 62-73. doi: 10.3901/JME.2018.05.062
Abstract ( 728 )    PDF(596KB) ( 555 )
References | Related Articles | Metrics
Relations between DOF of Mechanism and DOF of Links and Their Essential Differences
MU Dejun, ZHANG Yitong, ZHANG Xing
机械工程学报. 2018, 54 (5): 74-83. doi: 10.3901/JME.2018.05.074
Abstract ( 828 )    PDF(370KB) ( 571 )
References | Related Articles | Metrics
Design a Series of Parallel Mechanisms with a Helical Joint Based on the Concept of Articulated Moving Platform
WANG Congzhe, ZHANG Yi
机械工程学报. 2018, 54 (5): 84-93. doi: 10.3901/JME.2018.05.084
Abstract ( 878 )    PDF(408KB) ( 399 )
References | Related Articles | Metrics
Opportunities and Challenges of Machinery Intelligent Fault Diagnosis in Big Data Era
LEI Yaguo, JIA Feng, KONG Detong, LIN Jing, XING Saibo
机械工程学报. 2018, 54 (5): 94-104. doi: 10.3901/JME.2018.05.094
Abstract ( 3320 )    PDF(359KB) ( 4179 )
References | Related Articles | Metrics
Modulation Sidebands of the Vibration Signal of Gearbox
LI Yongzhuo, DING Kang, HE Guolin, LIN Huibin
机械工程学报. 2018, 54 (5): 105-112. doi: 10.3901/JME.2018.05.105
Abstract ( 1103 )    PDF(393KB) ( 516 )
References | Related Articles | Metrics
Analysis of Elastic-plastic Transient Response Based on Reduced Model
QIAN Pengbo, QIAN Linfang, YIN Xiaochun
机械工程学报. 2018, 54 (5): 113-120. doi: 10.3901/JME.2018.05.113
Abstract ( 889 )    PDF(322KB) ( 429 )
References | Related Articles | Metrics
Analysis of the Effects of Frequency Dependent Characteristic on the Vibration of Viscoelastic Composite Structure
SUN Wei, YAN Xianfei, WANG Zhuo
机械工程学报. 2018, 54 (5): 121-128. doi: 10.3901/JME.2018.05.121
Abstract ( 840 )    PDF(308KB) ( 309 )
References | Related Articles | Metrics
Study on Machinability of Surface-constrained Softness Abrasive Flow Based on CFD-DEM Coupled Method
JI Shiming, GE Jiangqin, GAO Tao, TAN Dapeng, CHEN Guoda, LI Chen
机械工程学报. 2018, 54 (5): 129-141. doi: 10.3901/JME.2018.05.129
Abstract ( 759 )    PDF(889KB) ( 538 )
References | Related Articles | Metrics
Elastic Deformation of Surface Topography under Line Contact and Sliding-rolling Conditions
LI Zhi, CHEN Jian, SHEN Jinlong, LIU Kun
机械工程学报. 2018, 54 (5): 142-148. doi: 10.3901/JME.2018.05.142
Abstract ( 822 )    PDF(409KB) ( 593 )
References | Related Articles | Metrics
Studies of Magnetic Fluid Plane Sealing in Split Sealing Device
ZHANG Huitao, LI Decai
机械工程学报. 2018, 54 (5): 149-155. doi: 10.3901/JME.2018.05.149
Abstract ( 652 )    PDF(480KB) ( 432 )
References | Related Articles | Metrics
Multi-objective Structural Optimization Design of Ti6Al4V Lattice Structure Formed by SLM
BAI Long, XIONG Fei, CHEN Xiaohong, YI Changyan, ZHANG Junfang, CHEN Rui
机械工程学报. 2018, 54 (5): 156-165. doi: 10.3901/JME.2018.05.156
Abstract ( 1108 )    PDF(542KB) ( 714 )
References | Related Articles | Metrics
New Method Based on Phase Congruency for Weld Pool Edge Extraction in Laser Cladding
LIU Jian, XIANG Chaoqian, WANG Fanghua, YI Huaian
机械工程学报. 2018, 54 (5): 166-172. doi: 10.3901/JME.2018.05.166
Abstract ( 657 )    PDF(353KB) ( 306 )
References | Related Articles | Metrics
Research on Numerical Calculation Method of Critical Load for Bolt Loosening under Transverse Loading
ZHANG Mingyuan, LU Liantao, TANG Mingming, ZENG Dongfang
机械工程学报. 2018, 54 (5): 173-178. doi: 10.3901/JME.2018.05.173
Abstract ( 762 )    PDF(288KB) ( 599 )
References | Related Articles | Metrics
Point Set Surface Reconstruction Method Based on Energy Functions and Vector Fields
LIU Yu, HOU Liang, XI Wenming
机械工程学报. 2018, 54 (5): 179-184. doi: 10.3901/JME.2018.05.179
Abstract ( 630 )    PDF(477KB) ( 278 )
References | Related Articles | Metrics
Wavelet Method Identifying the Characteristic Length Scale Parameter of Fractal Rough Surface
WANG Yusong, ZHANG Xueliang, WEN Shuhua, FAN Shirong
机械工程学报. 2018, 54 (5): 185-192. doi: 10.3901/JME.2018.05.185
Abstract ( 764 )    PDF(377KB) ( 408 )
References | Related Articles | Metrics
Research on Identification and Compensation of Linear Servo System Time Delay Parameter
YANG Liangliang, SHI Jun, LU Wenqi, SHI Weimin
机械工程学报. 2018, 54 (5): 193-201. doi: 10.3901/JME.2018.05.193
Abstract ( 751 )    PDF(395KB) ( 240 )
References | Related Articles | Metrics
Rigidity Analysis of the Double Actuations Micro-gripper Based on Constraint Substitution
GONG Jinliang, JIA Guopeng, ZHANG Yanfei
机械工程学报. 2018, 54 (5): 202-209. doi: 10.3901/JME.2018.05.202
Abstract ( 577 )    PDF(298KB) ( 267 )
References | Related Articles | Metrics
A New Solving Method of the Compliance Topology Optimization Problem of Continuum Structures under Multiple Load Cases
YU Liaohong, RONG Jianhua, ZHAO Zhijun, CHEN Yixiong, LI Fangyi
机械工程学报. 2018, 54 (5): 210-219. doi: 10.3901/JME.2018.05.210
Abstract ( 787 )    PDF(442KB) ( 489 )
References | Related Articles | Metrics
Establishment of the Shortest Spanning Tree of Assembly Dimensions and Its Application
WANG Youli, WANG Xiaohui, ZHANG Xueliang
机械工程学报. 2018, 54 (5): 220-227. doi: 10.3901/JME.2018.05.220
Abstract ( 839 )    PDF(276KB) ( 299 )
References | Related Articles | Metrics
Method of Monitoring the Working Status of the Magnetic Head during High Speed Revolution of Hard Disk
SHI Dequan, KANG Kaijiao, GAO Guili
机械工程学报. 2018, 54 (5): 228-232. doi: 10.3901/JME.2018.05.228
Abstract ( 580 )    PDF(269KB) ( 280 )
References | Related Articles | Metrics