Journal of Mechanical Engineering

2017, Volume 53 Issue 18 Publication:20 September 2017
Previous Issue Next Issue
Design of Improved Interdigital Capacitive Proximity Sensor Used for Dielectric Property Detection of Thickness Gradual Changed Structure
JIAO Jingpin, LI Liang, HE Cunfu, WU Bin
机械工程学报. 2017, 53 (18): 1-9. doi: 10.3901/JME.2017.18.001
Abstract ( 704 )    PDF(1147KB) ( 348 )
References | Related Articles | Metrics
Dispersion-based Mode Identification of Ultrasonic Guided Waves
WU Wenjun, ZHANG Linke, WANG Yuemin
机械工程学报. 2017, 53 (18): 10-17. doi: 10.3901/JME.2017.18.010
Abstract ( 588 )    PDF(509KB) ( 257 )
References | Related Articles | Metrics
Displacement Measurement Method Based on Doppler-like Effect in Time-varying Magnetic Field
LU Jin, CHEN Xihou, TANG Qifu, WU Liang
机械工程学报. 2017, 53 (18): 18-25. doi: 10.3901/JME.2017.18.018
Abstract ( 480 )    PDF(3717KB) ( 365 )
References | Related Articles | Metrics
Linear Amplification Method of High Power Signal for Exciting Electromagnetic Acoustic Transducer to Generate Guided Wave
ZHOU Jinjie, ZHENG Yang, ZHANG Zongjian, TAN Jidong
机械工程学报. 2017, 53 (18): 26-34. doi: 10.3901/JME.2017.18.026
Abstract ( 621 )    PDF(1623KB) ( 316 )
References | Related Articles | Metrics
Plastic Deformation and Stress Analysis on Hydro-pressing of Mild Steel Tube with Elliptical Section
ZHANG Xinlong, HE Jiuqiang, HAN Cong, YUAN Shijian
机械工程学报. 2017, 53 (18): 35-41. doi: 10.3901/JME.2017.18.035
Abstract ( 638 )    PDF(2276KB) ( 250 )
References | Related Articles | Metrics
Study on the Flat-reshaping Technology with No Rivet for Joining Aluminium Alloy Sheet of the Automobile
CHEN Chao, ZHAO Shengdun, CUI Minchao, HAN Xiaolan, ZHAO Xuzhe, FAN Shuqin
机械工程学报. 2017, 53 (18): 42-48. doi: 10.3901/JME.2017.18.042
Abstract ( 544 )    PDF(2377KB) ( 388 )
References | Related Articles | Metrics
Visualization Analysis for the Influence of Molding Parameters on the Characteristics of Trapped Gas in Injection Molding
LU Yong, JIANG Kaiyu, ZUO Junchao, WANG Minjie
机械工程学报. 2017, 53 (18): 49-56. doi: 10.3901/JME.2017.18.049
Abstract ( 471 )    PDF(1588KB) ( 268 )
References | Related Articles | Metrics
Influence and Affecting Mechanism of Tool Pin Geometrical Configuration on Weld Formation during Non-tilting Friction Stir Welding
WANG Min, ZHANG Huijie, YU Tao, ZHU Zhi, ZHANG Xiao, YANG Guangxin
机械工程学报. 2017, 53 (18): 57-63. doi: 10.3901/JME.2017.18.057
Abstract ( 515 )    PDF(3141KB) ( 288 )
References | Related Articles | Metrics
Damage Mechanism of Electrothermal Treatment on Carbon Fiber Epoxy Composites under Hygrothermal Environment
LIU Dengjun, GUAN Qingfeng, WANG Zhiping, LU Pengcheng, LI Na, LÜ Peng
机械工程学报. 2017, 53 (18): 64-70. doi: 10.3901/JME.2017.18.064
Abstract ( 538 )    PDF(5744KB) ( 196 )
References | Related Articles | Metrics
Study on Metal Forming Patterns of the Ultrasonic Vibration Assisted Upset-extruding Process
WU Xin, WANG Zhihai, YANG Shixi, LI Feng, SHEN Guoqiang
机械工程学报. 2017, 53 (18): 71-78. doi: 10.3901/JME.2017.18.071
Abstract ( 450 )    PDF(3328KB) ( 219 )
References | Related Articles | Metrics
Application of the XFEM to Predict the Edge Crack Propagation of Steel Sheet in the Cold Rolling Process
ZAN Daqian, CHEN Yanxing, CHEN Jianjun, PAN Hongliang, WANG Zhengdong
机械工程学报. 2017, 53 (18): 79-86. doi: 10.3901/JME.2017.18.079
Abstract ( 532 )    PDF(2969KB) ( 311 )
References | Related Articles | Metrics
Measurement and Analysis of Different Welders' Behavior Based on Welding Torch Orientation and Weld Pool Shape
WANG Xuezhou, SHI Yu, ZHU Ming, ZHANG Gang, FAN Ding
机械工程学报. 2017, 53 (18): 87-92. doi: 10.3901/JME.2017.18.087
Abstract ( 501 )    PDF(1805KB) ( 282 )
References | Related Articles | Metrics
Effect of Healing on Mechanical Properties by the Combined Treatment of Pulse Current and Laser Applied to Deep Crack in Titanium Alloy
DENG Dewei, YU Tao, ZHANG Lin, YANG Shuhua, ZHANG Hongchao
机械工程学报. 2017, 53 (18): 93-98. doi: 10.3901/JME.2017.18.093
Abstract ( 448 )    PDF(3232KB) ( 274 )
References | Related Articles | Metrics
Study on Rapid Solidification Microstructure and Electrical Property of Co-Cu-Pb Ternary Alloy
GAO Ka, GUO Xiaoqin, ZHANG Rui
机械工程学报. 2017, 53 (18): 99-105. doi: 10.3901/JME.2017.18.099
Abstract ( 485 )    PDF(3502KB) ( 372 )
References | Related Articles | Metrics
Influence of Multi-layer and Multi-pass TIG Welding Process on the High Strength Weld Metal Microstructure and Toughness
PENG Xingna, PENG Yun, PENG Xiankuan, CONG Xiangzhou
机械工程学报. 2017, 53 (18): 106-112. doi: 10.3901/JME.2017.18.106
Abstract ( 504 )    PDF(4755KB) ( 276 )
References | Related Articles | Metrics
Study on the Defects in Welded Joint of Hot Reheat Steam Pipe of Ultra Supercritical Units after Long-term Service
HONG Dinghua, WANG Huanli, LI Wuping, CAI Wenhe, DONG Shuqing, LIU Maosheng, ZENG Yanping
机械工程学报. 2017, 53 (18): 113-120. doi: 10.3901/JME.2017.18.113
Abstract ( 583 )    PDF(10734KB) ( 173 )
References | Related Articles | Metrics
Structure Characteristics and Kinematic Analysis of Redundant 6-DOF Parallel Mechanism
WANG Qiming, SU Jian, ZHANG Yirui, LÜ Zhichao, LIN Huiying, XU Guan
机械工程学报. 2017, 53 (18): 121-130. doi: 10.3901/JME.2017.18.121
Abstract ( 743 )    PDF(1323KB) ( 454 )
References | Related Articles | Metrics
Effect of Curved Track Parameters on Curving Performance of Linear Induction Motor Metro Vehicle
XIONG Jiayang, CAO Yabo, XIAO Xinbiao, WEN Zefeng, JIN Xuesong
机械工程学报. 2017, 53 (18): 131-137. doi: 10.3901/JME.2017.18.131
Abstract ( 600 )    PDF(568KB) ( 249 )
References | Related Articles | Metrics
Diesel Engine Radiation Noise Separation and Identification Based on Dual-channel Source Localization and BSS
LI Shengyang, XIANG Yang, QIAN Sichong, WANG Shuai, YAO Jiachi
机械工程学报. 2017, 53 (18): 138-145. doi: 10.3901/JME.2017.18.138
Abstract ( 486 )    PDF(3134KB) ( 239 )
References | Related Articles | Metrics
Influence of Water Condition Between Wheel and Rail on EMU Vehicle Dynamic Behavior
LI Guodong, CUI Dabin, SHEN Peng, LI Li
机械工程学报. 2017, 53 (18): 146-151. doi: 10.3901/JME.2017.18.146
Abstract ( 453 )    PDF(748KB) ( 196 )
References | Related Articles | Metrics
Topology Optimization of Periodic Lattice Structure with High Shear Strength Using Energy-based Homogenization
DU Yixian, LI Hanzhao, TIAN Qihua, YIN Yifeng, LUO Zhen
机械工程学报. 2017, 53 (18): 152-160. doi: 10.3901/JME.2017.18.152
Abstract ( 585 )    PDF(4266KB) ( 413 )
References | Related Articles | Metrics
Research on Simulation System of Hybrid Modern Tramway

YANG Jibin, SONG Pengyun, ZHANG Jiye, WANG Guoliang, ZHANG Han
Journal of Mechanical Engineering. 2017, 53 (18): 161-168. doi: 10.3901/JME.2017.18.161
Abstract ( 803 )    PDF(993KB) ( 427 )
References | Related Articles | Metrics
Probabilistic Life Prediction and Bending Fatigue Test for Gear
LI Ming, XIE Liyang, ZHANG Yu, BAI Xin, HU Jiexin
机械工程学报. 2017, 53 (18): 169-175. doi: 10.3901/JME.2017.18.169
Abstract ( 876 )    PDF(5116KB) ( 480 )
References | Related Articles | Metrics
Predictions of AUV's Hydrodynamic Parameters Based on Variable-fidelity Modeling
SONG Baowei, WANG Xinjing, WANG Peng
机械工程学报. 2017, 53 (18): 176-182. doi: 10.3901/JME.2017.18.176
Abstract ( 611 )    PDF(3595KB) ( 287 )
References | Related Articles | Metrics
Research on the Characteristic of the Electro-hydraulic Power Source Composed of Variable Speed Asynchronous Motor and Proportional Constant Pressure Pump
YAN Zheng, QUAN Long, ZHANG Xiaogang
机械工程学报. 2017, 53 (18): 183-190. doi: 10.3901/JME.2017.18.183
Abstract ( 541 )    PDF(1109KB) ( 246 )
References | Related Articles | Metrics
Modeling and Performance Evaluation of a Multistage Serial Manufacturing System Considering Rework and Product Polymorphism
ZHANG Heng, LI Aiping, LIU Xuemei, XU Liyun
机械工程学报. 2017, 53 (18): 191-201. doi: 10.3901/JME.2017.18.191
Abstract ( 633 )    PDF(587KB) ( 392 )
References | Related Articles | Metrics
Hydraulic Straightener Control Optimizer Based on Particle Swarm with Classification Learning
ZHANG Kai, SONG Jinchun, LI Song, SHI Jia
机械工程学报. 2017, 53 (18): 202-208. doi: 10.3901/JME.2017.18.202
Abstract ( 603 )    PDF(1095KB) ( 330 )
References | Related Articles | Metrics