Journal of Mechanical Engineering

2017, Volume 53 Issue 19 Publication:05 October 2017
Previous Issue Next Issue
Research Status and Future Prospects of Rotary Ultrasonic Machining of Hard and Brittle Materials

FENG Pingfa, WANG Jianjian, ZHANG Jianfu, WU Zhijun
Journal of Mechanical Engineering. 2017, 53 (19): 3-21. doi: 10.3901/JME.2017.19.003
Abstract ( 1220 )    PDF(2556KB) ( 982 )
References | Related Articles | Metrics
The Application Status and Development Trends of Ultrasonic Machining Technology
FANG Shanxiang, ZHAO Huiling, ZHANG Qinjian
机械工程学报. 2017, 53 (19): 22-32. doi: 10.3901/JME.2017.19.022
Abstract ( 1130 )    PDF(367KB) ( 1114 )
References | Related Articles | Metrics
Review of Ultrasonic Vibration Assisted Drilling
ZHANG Yuan, KANG Renke, LIU Jinting, ZHANG Yiming, ZHENG Weishuai, DONG Zhigang
机械工程学报. 2017, 53 (19): 33-44. doi: 10.3901/JME.2017.19.033
Abstract ( 949 )    PDF(1061KB) ( 681 )
References | Related Articles | Metrics
Characteristics of Piezoelectric Ultrasonic Transducer with Electric Load Modifying Frequency
WANG Tiansheng, WU Zhijun, FENG Pingfa, ZHANG Jianfu, YU Dingwen
机械工程学报. 2017, 53 (19): 45-51. doi: 10.3901/JME.2017.19.045
Abstract ( 858 )    PDF(1496KB) ( 449 )
References | Related Articles | Metrics
Research on the Electromechanical Conversion Efficiency for Giant Magnetostrictive Ultrasonic Machining System
CAI Wanchong, ZHANG Jianfu, YU Dingwen, WU Zhijun, FENG Pingfa
机械工程学报. 2017, 53 (19): 52-58. doi: 10.3901/JME.2017.19.052
Abstract ( 873 )    PDF(1021KB) ( 310 )
References | Related Articles | Metrics
Study on Matching Performance of Ultrasonic Vibration and Grinding Parameters Based on a Single Abrasive Grinding
DING Kai, FU Yucan, SU Honghua, LI Qilin, LEI Weining
机械工程学报. 2017, 53 (19): 59-65. doi: 10.3901/JME.2017.19.059
Abstract ( 717 )    PDF(3313KB) ( 414 )
References | Related Articles | Metrics
Study on the Thrust Force and Chip in Rotary Ultrasonic-assisted Drilling of Titanium Alloys (Ti6Al4V)
SHAO Zhenyu, LI Zhe, ZHANG Deyuan, JIANG Xinggang, QIN Wei
机械工程学报. 2017, 53 (19): 66-72. doi: 10.3901/JME.2017.19.066
Abstract ( 651 )    PDF(7022KB) ( 468 )
References | Related Articles | Metrics
Analysis of Influence on Ultrasonic-assisted Cutting Force of Nomex Honeycomb Core Material with Straight Knife
WANG Yidan, WANG Xuanping, KANG Renke, SUN Jiansong, JIA Zhenyuan, DONG Zhigang
机械工程学报. 2017, 53 (19): 73-82. doi: 10.3901/JME.2017.19.073
Abstract ( 777 )    PDF(798KB) ( 403 )
References | Related Articles | Metrics
Research on Modeling and Simulation of Surface Microtopography in Ultrasonic Vibration Spiral Grinding
WANG Qiuyan, LIANG Zhiqiang, WANG Xibin, ZHOU Tianfeng, ZHAO Wenxiang, WU Yongbo, JIAO Li
机械工程学报. 2017, 53 (19): 83-89. doi: 10.3901/JME.2017.19.083
Abstract ( 769 )    PDF(5363KB) ( 629 )
References | Related Articles | Metrics
Charization of Surface Microscopic of Nomex Honeycomb after Ultrasonic Assisted Cutting
ZHANG Xun, DONG Zhigang, WANG Yidan, XU Zengdi, SONG Hongxia, KANG Renke
机械工程学报. 2017, 53 (19): 90-99. doi: 10.3901/JME.2017.19.090
Abstract ( 861 )    PDF(12138KB) ( 284 )
References | Related Articles | Metrics
Non-physical Sharpening of Cutting Edge Induced by the Joint-use of Ultrasonic Vibration and Cutting Fluid in Metal-cutting
YANG Guang, PI Jun, LIU Zhongsheng
机械工程学报. 2017, 53 (19): 100-106. doi: 10.3901/JME.2017.19.100
Abstract ( 586 )    PDF(4971KB) ( 460 )
References | Related Articles | Metrics
An Experimental Study on Rotary Ultrasonic Machining of High Volume Fraction Silicon Carbide-reinforced Aluminum Matrix Composites (SiCp/Al)
ZHA Huiting, FENG Pingfa, ZHANG Jianfu
机械工程学报. 2017, 53 (19): 107-113. doi: 10.3901/JME.2017.19.107
Abstract ( 762 )    PDF(2687KB) ( 475 )
References | Related Articles | Metrics
Experimental Research of Titanium Alloy Taper Hole by Ultrasonic Magnetic Abrasive Finishing
JIAO Anyuan, QUAN Hongjun, CHEN Yan, HAN Bing
机械工程学报. 2017, 53 (19): 114-119. doi: 10.3901/JME.2017.19.114
Abstract ( 762 )    PDF(5645KB) ( 462 )
References | Related Articles | Metrics
Feasibility Study of High-speed Ultrasonic Vibration Cutting Titanium Alloy
ZHANG Xiangyu, SUI He, ZHANG Deyuan, JIANG Xinggang, WU Ruibiao
机械工程学报. 2017, 53 (19): 120-127. doi: 10.3901/JME.2017.19.120
Abstract ( 766 )    PDF(8456KB) ( 476 )
References | Related Articles | Metrics
Experimental Study on Ultrasonic Cutting of Aluminum Honeycombs
SUN Jiansong, DONG Zhigang, WANG Yidan, LIU Jinting, QIN Yan, KANG Renke
机械工程学报. 2017, 53 (19): 128-135. doi: 10.3901/JME.2017.19.128
Abstract ( 714 )    PDF(5690KB) ( 326 )
References | Related Articles | Metrics
Analysis of Power Ultrasonic Honing Cavitation Test
ZHU Xijing, YE Linzheng
机械工程学报. 2017, 53 (19): 136-142. doi: 10.3901/JME.2017.19.136
Abstract ( 579 )    PDF(4254KB) ( 325 )
References | Related Articles | Metrics
The Improvement of Deep-hole Boring Machining Quality Assisted with Ultrasonic Vibration
ZHANG Xiangyu, SUI He, ZHANG Deyuan, WU Ruibiao
机械工程学报. 2017, 53 (19): 143-148. doi: 10.3901/JME.2017.19.143
Abstract ( 699 )    PDF(2893KB) ( 472 )
References | Related Articles | Metrics
Study on TIG Arc Preheating Auxiliary Aluminum-copper Ultrasonic Seam Welding
YU Jiang, WANG Bo, JI Ang, ZHANG Hongtao
机械工程学报. 2017, 53 (19): 149-153. doi: 10.3901/JME.2017.19.149
Abstract ( 711 )    PDF(3059KB) ( 294 )
References | Related Articles | Metrics
Product Modeling Based on Structure Pre-Mapping
XU Zhijia, WANG Qinghui, LI Jingrong
机械工程学报. 2017, 53 (19): 154-165. doi: 10.3901/JME.2017.19.154
Abstract ( 765 )    PDF(5731KB) ( 405 )
References | Related Articles | Metrics
Different Point Contact Error and Correction Method in Gear Integrated Error Measurement
WANG Xiaoyi, SHI Zhaoyao, SHU Zanhui, YU Bo
机械工程学报. 2017, 53 (19): 166-175. doi: 10.3901/JME.2017.19.166
Abstract ( 824 )    PDF(804KB) ( 387 )
References | Related Articles | Metrics
Topology Structure Optimization and Performance Improvement for Parallel Mechanisms Based on Structure Coupling-reducing and Motion Decoupling
SHEN Huiping, LI Ju, WANG Zhen, MENG Qingmei, DAI Lifang
机械工程学报. 2017, 53 (19): 176-186. doi: 10.3901/JME.2017.19.176
Abstract ( 709 )    PDF(795KB) ( 419 )
References | Related Articles | Metrics
Development and Grinding Performance of a Pressurized Internal Cooling Slotted Grinding Wheel
PENG Ruitao, ZHANG Shan, TANG Xinzi, CHEN Rui, ZHOU Zhuan
机械工程学报. 2017, 53 (19): 187-194. doi: 10.3901/JME.2017.19.187
Abstract ( 809 )    PDF(8100KB) ( 390 )
References | Related Articles | Metrics
Discussion on a Common Assumption of the Lubricant Rheology
YANG Ping, CUI Jinlei, LIU Xiaoling, YANG Peiran
机械工程学报. 2017, 53 (19): 195-200. doi: 10.3901/JME.2017.19.195
Abstract ( 856 )    PDF(368KB) ( 301 )
References | Related Articles | Metrics
Product Planning Decision Based on Product Life Cycles:Modeling and Application
LI Baishu, ZHANG Gang, HUANG Yanfei
机械工程学报. 2017, 53 (19): 201-208. doi: 10.3901/JME.2017.19.201
Abstract ( 874 )    PDF(352KB) ( 354 )
References | Related Articles | Metrics