Research Progress on Additive Manufacturing of Low Activation Steels

doi:10.3901/JME.2024.07.312

Abstract

Abstract: Reduced activation ferritic/martensitic (RAFM) steels are currently the more mature fusion reactors structural materials. Oxide dispersion strengthened (ODS) steels with low activation characteristics, which have both irradiation stability and high temperature strength, are the most promising structural material for fusion reactors. Typical application cases of additive manufacturing technology in the field of fusion reactor structural materials are summarized. The research progress on the control of microstructure and optimization of mechanical properties of RAFM steels for additive manufacturing is reviewed in terms of heat input, scanning strategies, sample sizes, powder characteristics, and heat treatment optimization. The research strategies of powder preparation, defect control and nanophase regulation of ODS steels with specific low activation characteristics in additive manufacturing are reviewed. Finally, the opportunities and challenges of additively manufactured RAFM steels and low activation ODS steels are summarized, and their development trends and technical difficulties are prospected.

Key words: additive manufacturing, RAFM steels, low activation ODS steels, microstructure, mechanical properties

CLC Number:

TG142

CHEN Wei, ZHAO Jie, ZHU Libin, CAO Haibo. Research Progress on Additive Manufacturing of Low Activation Steels[J]. Journal of Mechanical Engineering, 2024, 60(7): 312-333.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/10.3901/JME.2024.07.312

http://www.cjmenet.com.cn/EN/Y2024/V60/I7/312

References

[1] BARBARINO M. A brief history of nuclear fusion[J]. Nature Physics,2020,16(9):890-893.
[2] KNASTER J,MOESLANG A,MUROGA T. Materials research for fusion[J]. Nature Physics,2016,12(5):424-434.
[3] GILBERT M R,FORREST R A. Comprehensive handbook of activation data calculated using EASY-2003[J]. Fusion Engineering and Design,2006,81(8):1511-1516.
[4] CHEN J,LIU C,WEI C,et al. Study on microstructure and mechanical properties of direct diffusion bonded low-carbon RAFM steels[J]. Journal of Manufacturing Processes,2019,43:192-199.
[5] HIRATA A,FUJITA T,WEN Y R,et al. Atomic structure of nanoclusters in oxide-dispersion-strengthened steels[J]. Nature Materials,2011,10(12):922-926.
[6] TANIGAWA H,SHIBA K,MöSLANG A,et al. Status and key issues of reduced activation ferritic/martensitic steels as the structural material for a DEMO blanket[J]. Journal of Nuclear Materials,2011,417(1):9-15.
[7] POITEVIN Y,AUBERT P,DIEGELE E,et al. Development of welding technologies for the manufacturing of European Tritium Breeder blanket modules[J]. Journal of Nuclear Materials,2011,417(1):36-42.
[8] MASSEY C P,DRYEPONDT S N,EDMONDSON P D,et al. Multiscale investigations of nanoprecipitate nucleation,growth,and coarsening in annealed low-Cr oxide dispersion strengthened FeCrAl powder[J]. Acta Materialia,2019,166:1-17.
[9] 李涤尘,贺健康,田小永,等. 增材制造:实现宏微结构一体化制造[J]. 机械工程学报,2013,49(6):129-135. LI Dichen,HE Jiankan,TIAN Xiaoyong,et al. Additive manufacturing:Integrated fabrication of macro/microstructures[J]. Journal of Mechanical Engineering,2013,49(6):129-135.
[10] DEBROY T,WEI H L,ZUBACK J S,et al. Additive manufacturing of metallic components-Process,structure and properties[J]. Progress in Materials Science,2018,92:112-224.
[11] ASTM F2792-12a. Standard Terminology for Additive Manufacturing Technologies[S]. United States:2013.
[12] YIN Y,TAN Q,BERMINGHAM M,et al. Laser additive manufacturing of steels[J]. International Materials Reviews,2021,67(5):487-573.
[13] ABOULKHAIR N T,SIMONELLI M,PARRY L,et al. 3D printing of aluminium alloys:Additive manufacturing of aluminium alloys using selective laser melting[J]. Progress in Materials Science,2019,106:100578.
[14] YEOM H,SRIDHARAN K. Cold spray technology in nuclear energy applications:A review of recent advances[J]. Annals of Nuclear Energy,2021,150:107835.
[15] FENG K,WANG X,FENG Y,et al. Current progress of Chinese HCCB TBM program[J]. Fusion Engineering and Design,2016,109-111:729-735.
[16] NEUBERGER H,REY J,MATERNA-MORRIS E,et al. Progress in the KIT approach for development of the HCPB TBM stiffening plate feasibility mock up fabrication[J]. Fusion Engineering and Design,2013,88(5):265-270.
[17] NEUBERGER H,HERNANDEZ F,REY J,et al. Fabrication of HCPB breeding blanket components using the additive manufacturing processes of selective laser melting and cold spray[J]. Fusion Engineering and Design,2020,160:112026.
[18] 黄群英,凤麟团队. 中国抗中子辐照钢的抗辐照设计与验证[J]. 原子能科学技术,2019,53(10):1856-1867. HUANG Qunying,FDS Team. Design and verification of irradiation resistance property of china low activation martensitic steel[J]. Atomic Energy Science and Technology,2019,53(10):1856-1867.
[19] 吴世凯,张建超,廖洪彬,等. 聚变堆低活化铁素体/马氏体(RAFM)钢焊接研究进展[J]. 机械工程学报,2019,55(2):195-203. WU Shikai,ZHANG Jianchao,LIAO Hongbin,et al. Review on welding technology of RAFM steel[J]. Journal of Mechanical Engineering,2019,55(2):195-203.
[20] LUO T,ZHONG Y. Potential application of laser solid forming technology for fabrication of breeding blanket[J]. Fusion Engineering and Design,2012,87(2):128-133.
[21] ORDÁS N,ARDILA L C,ITURRIZA I,et al. Fabrication of TBMs cooling structures demonstrators using additive manufacturing (AM) technology and HIP[J]. Fusion Engineering and Design,2015,96-97:142-148.
[22] NEUBERGER H,REY J,HEES M,et al. Selective laser sintering as manufacturing process for the realization of complex nuclear fusion and high heat flux components[J]. Fusion Science and Technology,2017,72(4):667-672.
[23] KOEHLY C,NEUBERGER H,BÜHLER L. Fabrication of thin-walled fusion blanket components like flow channel inserts by selective laser melting[J]. Fusion Engineering and Design,2019,143:171-179.
[24] HERNÁNDEZ F A,PERESLAVTSEV P,ZHOU G,et al. Advancements in the helium-cooled pebble bed breeding blanket for the EU DEMO:Holistic design approach and lessons learned[J]. Fusion Science and Technology,2019,75(5):352-364.
[25] NEUBERGER H,REY J,ARBEITER F,et al. Evaluation of conservative and innovative manufacturing routes for gas cooled test blanket module and breeding blanket first walls[J]. Fusion Engineering and Design,2019,146:2140-2143.
[26] NEUBERGER H,HERNANDEZ F,RUCK S,et al. Advances in additive manufacturing of fusion materials[J]. Fusion Engineering and Design,2021,167:112309.
[27] ARBEITER F,BACHMANN C,CHEN Y,et al. Thermal-hydraulics of helium cooled First Wall channels and scoping investigations on performance improvement by application of ribs and mixing devices[J]. Fusion Engineering and Design,2016,109-111:1123-1129.
[28] NORAJITRA P,BASUKI W W,GONZALEZ M,et al. Development of sandwich flow channel inserts for an EU DEMO dual coolant blanket concept[J]. Fusion Science and Technology,2015,68(3):501-506.
[29] RAPISARDA D,FERNANDEZ I,PALERMO I,et al. Status of the engineering activities carried out on the European DCLL[J]. Fusion Engineering and Design,2017,124:876-881.
[30] 陈伟. CMT电弧增材制造TC4钛合金组织及力学性能调控[D]. 南昌:南昌航空大学,2019. CHEN Wei. Microstructure and mechanical property control of CMT arc additive manufacturing TC4 titanium alloy[D]. Nanchang:Nanchang Hangkong University,2019.
[31] LIPPOLD J,KOTECKI D. Welding metallurgy and weldability of stainless steel[M]. New Jersey:Wiley-VCH,2005.
[32] LIPPOLD J C. Transformation and tempering behavior of 12Cr-1Mo-0.3V martensitic stainless steel weldments[J]. Journal of Nuclear Materials,1981,104:1127-1131.
[33] SRIDHARAN N,GUSSEV M N,FIELD K G. Performance of a ferritic/martensitic steel for nuclear reactor applications fabricated using additive manufacturing[J]. Journal of Nuclear Materials,2019,521:45-55.
[34] MUKHERJEE T,DEBROY T,LIENERT T J,et al. Spatial and temporal variation of hardness of a printed steel part[J]. Acta Materialia,2021,209:116775.
[35] SRIDHARAN N,FIELD K. A road map for the advanced manufacturing of ferritic-martensitic steels[J]. Fusion Science and Technology,2019,75(4):264-274.
[36] BARBA D,ALABORT C,TANG Y T,et al. On the size and orientation effect in additive manufactured Ti-6Al-4V[J]. Materials & Design,2020,186:108235.
[37] ROBERTS I A,WANG C J,ESTERLEIN R,et al. A three-dimensional finite element analysis of the temperature field during laser melting of metal powders in additive layer manufacturing[J]. International Journal of Machine Tools and Manufacture,2009,49(12):916-923.
[38] SHI Y,LU Z,REN Y,et al. Microstructure and tensile properties of laser engineered net shaped reduced activation ferritic/martensitic steel[J]. Materials Characterization,2018,144:554-562.
[39] ZHU G,SHI S,FU G,et al. The influence of the substrate-inclined angle on the section size of laser cladding layers based on robot with the inside-beam powder feeding[J]. The International Journal of Advanced Manufacturing Technology,2017,88(5):2163-2168.
[40] AN Q,XIA Z X,ZHANG C,et al. Effect of thermal cycles on microstructure of reduced activation steel fabricated using laser melting deposition[J]. Journal of Iron and Steel Research International,2021,28(3):316-326.
[41] 徐加超,夏志新,陈鹏,等. 中空环形激光热源建模及温度场有限元模拟[J]. 中国激光,2021,48(17):31-40. XU Jiachao,XIA Zhixin,CHEN Peng,et al. Modeling of hollow ring laser heat source and finite element simulation of temperature field[J]. Chinese Journal of Lasers,2021,48(17):31-40.
[42] XIA Z,XU J,SHI J,et al. Microstructure evolution and mechanical properties of reduced activation steel manufactured through laser directed energy deposition[J]. Additive Manufacturing,2020,33:101114.
[43] JIANG M G,CHEN Z W,TONG J D,et al. Strong and ductile reduced activation ferritic/martensitic steel additively manufactured by selective laser melting[J]. Materials Research Letters,2019,7(10):426-432.
[44] LIU C Y,TONG J D,JIANG M G,et al. Effect of scanning strategy on microstructure and mechanical properties of selective laser melted reduced activation ferritic/martensitic steel[J]. Materials Science and Engineering:A,2019,766:138364.
[45] JIANG M,LIU C,CHEN Z,et al. Enhanced strength-ductility synergy of selective laser melted reduced activation ferritic/martensitic steel via heterogeneous microstructure modification[J]. Materials Science and Engineering:A,2021,801:140424.
[46] BONK S,NEUBERGER H,BECKERS D,et al. Additive manufacturing technologies for EUROFER97 components[J]. Journal of Nuclear Materials,2021,548:152859.
[47] TAN L,SNEAD L L,KATOH Y. Development of new generation reduced activation ferritic-martensitic steels for advanced fusion reactors[J]. Journal of Nuclear Materials,2016,478:42-49.
[48] SAWADA K,TANEIKE M,KIMURA K,et al. Effect of nitrogen content on microstructural aspects and creep behavior in extremely low carbon 9Cr heat-resistant steel[J]. ISIJ International,2004,44(7):1243-1249.
[49] LEE T,AOYAGI K,BIAN H,et al. The microstructure and mechanical properties of selective electron beam melting manufactured 9-12Cr ferritic/martensitic steel using N- and Ar-atomized powder[J]. Additive Manufacturing,2021,45:102075.
[50] SINGH A,KAPIL S,DAS M. A comprehensive review of the methods and mechanisms for powder feedstock handling in directed energy deposition[J]. Additive Manufacturing,2020,35:101388.
[51] FENG J,ZHANG P,JIA Z,et al. Microstructures and mechanical properties of reduced activation ferritic/martensitic steel fabricated by laser melting deposition[J]. Fusion Engineering and Design,2021,173:112865.
[52] WU Q S,ZHENG S H,HUANG Q Y,et al. Continuous cooling transformation behaviors of CLAM steel[J]. Journal of Nuclear Materials,2013,442:S67-S70.
[53] GRÄNING T,SRIDHARAN N. Benchmarking a 9Cr-2WVTa reduced activation ferritic martensitic steel fabricated via additive manufacturing[J]. Metals,2022,12:342.
[54] BONK S,DüRRSCHNABEL M,NEUBERGER H,et al. Microstructural features in additively manufactured EUROFER97 components[J]. Fusion Engineering and Design,2021,173:112813.
[55] ZHAI Y,HUANG B,MAO X,et al. Effect of hot isostatic pressing on microstructure and mechanical properties of CLAM steel produced by selective laser melting[J]. Journal of Nuclear Materials,2019,515:111-121.
[56] HUANG B,ZHAI Y,LIU S,et al. Microstructure anisotropy and its effect on mechanical properties of reduced activation ferritic/martensitic steel fabricated by selective laser melting[J]. Journal of Nuclear Materials,2018,500:33-41.
[57] LEE T,BIAN H,AOYAGI K,et al. Fabricating 9-12 Cr ferritic/martensitic steels using selective electron beam melting[J]. Materials Letters,2020,271:127747.
[58] KLUEH R L,NELSON A T. Ferritic/martensitic steels for next-generation reactors[J]. Journal of Nuclear Materials,2007,371(1):37-52.
[59] LI K,KLECKA M A,CHEN S,et al. Wire-arc additive manufacturing and post-heat treatment optimization on microstructure and mechanical properties of Grade 91 steel[J]. Additive Manufacturing,2021,37:101734.
[60] ZINKLE S J,SNEAD L L. Designing Radiation Resistance in Materials for Fusion Energy[J]. Annual Review of Materials Research,2014,44:241-267.
[61] TAN L,BUSBY J T. Formulating the strength factor α for improved predictability of radiation hardening[J]. Journal of Nuclear Materials,2015,465:724-730.
[62] CARROLL B E,PALMER T A,BEESE A M. Anisotropic tensile behavior of Ti-6Al-4V components fabricated with directed energy deposition additive manufacturing[J]. Acta Materialia,2015,87:309-320.
[63] CHEN W,CHEN Y,ZHANG T,et al. Effects of location on the microstructure and mechanical properties of Cu-8Al-2Ni-2Fe-2Mn alloy produced through wire arc additive manufacturing[J]. Journal of Materials Engineering and Performance,2020,29:4733-4744.
[64] ZHANG D,QIU D,GIBSON M A,et al. Additive manufacturing of ultrafine-grained high-strength titanium alloys[J]. Nature,2019,576(7785):91-95.
[65] 陈伟,陈玉华,温涛涛,等. 超声振动对电弧增材制造铝青铜合金组织和拉伸性能的影响[J]. 中国有色金属学报,2020,30(10):2280-2294. CHEN Wei,CHEN Yuhua,WEN Taotao,et al. Effect of ultrasonic vibration on microstructure and tensile properties of aluminum bronze alloy produced by wire arc additive manufacturing[J]. The Chinese Journal of Nonferrous Metals,2020,30(10):2280-2294.
[66] CHEN W,CHEN Y,ZHANG T,et al. Effect of ultrasonic vibration and interpass temperature on microstructure and mechanical properties of Cu-8Al-2Ni-2Fe-2Mn alloy fabricated by wire arc additive manufacturing[J]. Metals,2020,10(2):215.
[67] 崔忠圻,覃耀春. 金属学与热处理[M]. 北京:机械工业出版社,2004. CUI Zhongqi,TAN Yaochun. Metallography & heat treatment[M]. Beijing:China Machine Press,2004.
[68] SHANG Z,DING J,FAN C,et al. Tailoring the strength and ductility of T91 steel by partial tempering treatment[J]. Acta Materialia,2019,169:209-224.
[69] LIU S,HUANG Q,PENG L,et al. Microstructure and its influence on mechanical properties of CLAM steel[J]. Fusion Engineering and Design,2012,87(9):1628-1632.
[70] KELLER C,MARGULIES M M,HADJEM-HAMOUCHE Z,et al. Influence of the temperature on the tensile behaviour of a modified 9Cr-1Mo T91 martensitic steel[J]. Materials Science and Engineering:A,2010,527(24):6758-6764.
[71] ZINKLE S J,BOUTARD J L,HOELZER D T,et al. Development of next generation tempered and ODS reduced activation ferritic/martensitic steels for fusion energy applications[J]. Nuclear Fusion,2017,57(9):092005.
[72] MATERNA-MORRIS E,MöSLANG A,SCHNEIDER H C. Tensile and low cycle fatigue properties of EUROFER97-steel after 16.3DPA neutron irradiation at 523,623 and 723K[J]. Journal of Nuclear Materials,2013,442:S62-S66.
[73] HUANG Q. Development status of CLAM steel for fusion application[J]. Journal of Nuclear Materials,2014,455(1):649-654.
[74] HUANG B,ZHANG J,WU Q. Microstructure and mechanical properties of China low activation martensitic steel joint by TIG multi-pass welding with a new filler wire[J]. Journal of Nuclear Materials,2017,490:115-124.
[75] 束德林. 工程材料力学性能[M]. 2版. 北京:机械工业出版社,2007. SHU Delin. Mechanical properties of engineering materials[M]. 2nd ed. Beijing:China Machine Press,2007.
[76] 许德,高华兵,董涛,等. 增材制造用金属粉末研究进展[J]. 中国有色金属学报,2021,31(02):245-257. XU De,GAO Huabing,DONG Tao,et al. Research progress of metal powder for additive manufacturing[J]. The Chinese Journal of Nonferrous Metals,2021,31(2):245-257.
[77] 郑聃,李瑞迪,宋波,等. NiTi气雾化制粉工艺对选区激光熔化成型性、制件超弹性的影响[J]. 机械工程学报,2020,56(15):104-109. ZHENG Dan,LI Ruidi,SONG Bo,et al. Effect of NiTi powder gas atomization process on the selective laser melting moldability and alloys' superelastic[J]. Journal of Mechanical Engineering,2020,56(15):104-109.
[78] SHI Y,LU Z,YU L,et al. Microstructure and tensile properties of Zr-containing ODS-FeCrAl alloy fabricated by laser additive manufacturing[J]. Materials Science and Engineering:A,2020,774:138937.
[79] ZHONG Y,LIU L,ZOU J,et al. Oxide dispersion strengthened stainless steel 316L with superior strength and ductility by selective laser melting[J]. Journal of Materials Science & Technology,2020,42:97-105.
[80] DOÑATE-BUENDIA C,STREUBEL R,KÜRNSTEINER P,et al. Effect of nanoparticle additivation on the microstructure and microhardness of oxide dispersion strengthened steels produced by laser powder bed fusion and directed energy deposition[J]. Procedia CIRP,2020,94:41-45.
[81] WILMS M B,STREUBEL R,FRÖMEL F,et al. Laser additive manufacturing of oxide dispersion strengthened steels using laser-generated nanoparticle-metal composite powders[J]. Procedia CIRP,2018,74:196-200.
[82] DOñATE-BUENDIA C,KüRNSTEINER P,STERN F,et al. Microstructure formation and mechanical properties of ODS steels built by laser additive manufacturing of nanoparticle coated iron-chromium powders[J]. Acta Materialia,2021,206:116566.
[83] WALKER J C,BERGGREEN K M,JONES A R,et al. Fabrication of Fe-Cr-Al oxide dispersion strengthened PM2000 alloy using selective laser melting[J]. 2009,11(7):541-546.
[84] BOEGELEIN T,DRYEPONDT S N,PANDEY A,et al. Mechanical response and deformation mechanisms of ferritic oxide dispersion strengthened steel structures produced by selective laser melting[J]. Acta Materialia,2015,87:201-215.
[85] VASQUEZ E,GIROUX P-F,LOMELLO F,et al. Elaboration of oxide dispersion strengthened Fe-14Cr stainless steel by selective laser melting[J]. Journal of Materials Processing Technology,2019,267:403-413.
[86] ZHAI W,ZHOU W,NAI S M L,et al. Characterization of nanoparticle mixed 316 L powder for additive manufacturing[J]. Journal of Materials Science & Technology,2020,47:162-168.
[87] SHI Y,LU Z,XU H,et al. Microstructure characterization and mechanical properties of laser additive manufactured oxide dispersion strengthened Fe-9Cr alloy[J]. Journal of Alloys and Compounds,2019,791:121-133.
[88] DOÑATE-BUENDÍA C,FRÖMEL F,WILMS M B,et al. Oxide dispersion-strengthened alloys generated by laser metal deposition of laser-generated nanoparticle-metal powder composites[J]. Materials & Design,2018,154:360-369.
[89] CHANG H J,CHO H Y,KIM J H. Stability of Y-Ti-O nanoparticles during laser melting of advanced oxide dispersion-strengthened steel powder[J]. Journal of Alloys and Compounds,2015,653:528-533.
[90] ARKHURST B M,BAE J H,NA M Y,et al. Effect of tellurium on the microstructure and mechanical properties of Fe-14Cr oxide-dispersion-strengthened steels produced by additive manufacturing[J]. Journal of Materials Science & Technology,2021,95:114-126.
[91] GAO R,ZENG L,DING H,et al. Characterization of oxide dispersion strengthened ferritic steel fabricated by electron beam selective melting[J]. Materials & Design,2016,89:1171-1180.
[92] PRAT O,GARCIA J,ROJAS D,et al. Investigations on the growth kinetics of Laves phase precipitates in 12% Cr creep-resistant steels:Experimental and DICTRA calculations[J]. Acta Materialia,2010,58(18):6142-6153.
[93] MAGNUSSON H,SANDSTRÖM R. The role of dislocation climb across particles at creep conditions in 9 to 12 Pct Cr steels[J]. Metallurgical and Materials Transactions A,2007,38(10):2428-2434.
[94] 卢秉恒. 增材制造技术-现状与未来[J]. 中国机械工程,2020,31(1):19-23. LU Bingheng. Additive manufacturing-Current situation and future[J]. China Mechanical Engineering,2020,31(1):19-23.
[95] 叶凯,梁风,姚耀春,等. 热等离子体制备与球化超细难熔金属粉的研究进展[J]. 中国有色金属学报,2020,30(9):2011-2021. YE Kai,LIANG Feng,YAO Yaochun,et al. Research progress of preparing and spheroidizing ultrafine refractory metal powder by thermal plasma[J]. The Chinese Journal of Nonferrous Metals,2020,30(9):2011-2021.
[96] ALINGER M J,ODETTE G R,HOELZER D T. The development and stability of Y-Ti-O nanoclusters in mechanically alloyed Fe-Cr based ferritic alloys[J]. Journal of Nuclear Materials,2004,329-333:382-386.
[97] LIU T,WANG L,WANG C,et al. Feasibility of using Y2Ti2O7 nanoparticles to fabricate high strength oxide dispersion strengthened Fe-Cr-Al steels[J]. Materials & Design,2015,88:862-870.
[98] WU Y,ZHAO H,LI J,et al. Effects of Y4Zr3O12 addition on the microstructure and mechanical properties of Fe-15Cr-2W-0.35Ti ODS steels[J]. Materials Science and Engineering:A,2021,804:140734.