Additive Manufacturing Technologies and Research Progress for Large-scale Lattice Structures

doi:10.3901/JME.260068

Abstract

Abstract: Large-scale lattice structures, characterized by their high porosity and multifunctional properties such as impact resistance, vibration damping, and noise reduction, hold great potential in key industrial sectors including national defense, marine engineering, and construction. However, limitations in current manufacturing technologies and methods remain a critical bottleneck for their broader application. Additive manufacturing (AM), by virtue of its layer-by-layer fabrication principle, overcomes the constraints of traditional techniques and enables the integrated 3D formation of spatially complex large-scale lattice structures. This study focuses on the latest developments in AM technologies and approaches tailored for large-scale lattice structures, and provides a comprehensive review from three perspectives: manufacturing processes, manufacturing equipment, and application prospects. In terms of manufacturing processes, we compare the state-of-the-art fabrication methods for large-scale multi-material metal lattice structures developed by domestic and international research teams, with a focus on truss-type and regular geometric lattice structures. Regarding manufacturing equipment, we summarize the structural configurations and control systems of current AM platforms, highlighting key differences and commonalities. Finally, we explore the future application potential of large-scale lattice structures in the context of AM. This review aims to systematically elucidate the recent progress and future directions of large-scale lattice structure fabrication via additive manufacturing, and to promote the industrial application of AM technologies for the efficient and high-quality production of lightweight structures.

Key words: large-scale lattice structure, wire arc additive manufacturing, manufacturing process, manufacturing equipment, application prospect

CLC Number:

XU Tianqiu, FU Rui, LUO Longxi, XU Hanwen, MAO Hao, LIU Changmeng. Additive Manufacturing Technologies and Research Progress for Large-scale Lattice Structures[J]. Journal of Mechanical Engineering, 2026, 62(3): 2-14.

References

[1] BOURSIER N C，PAOLINO D S，TRIDELLO A. Additively manufactured lattice structures：An innovative defect-based design methodology against crash impact[J]. Engineering Failure Analysis，2023，152：107436.
[2] EVANS S I，WANG J，QIN J，et al. A review of WAAM for steel construction-Manufacturing，material and geometric properties，design，and future directions[J]. Structures，2022，44：1506-1522.
[3] GARDNER L. Metal additive manufacturing in structural engineering-review，advances，opportunities and outlook[J]. Structures，2023，47：2178-2193.
[4] WADLEY H N G. Cellular metals manufacturing[J]，Advanced Engineering Materials，2002，4(10)：726-733.
[5] CARNEIRO V H，RAWSON S D，PUGA H，et al. Additive manufacturing assisted investment casting：A low-cost method to fabricate periodic metallic cellular lattices[J]. Additive Manufacturing，2020，33：101085.
[6] HARRIS J，MCSHANE G. Metallic stacked origami cellular materials：Additive manufacturing，properties，and modelling[J]. International Journal of Solids Structures，2020，185：448-466.
[7] HUSSEIN A，HAO L，YAN C，et al. Advanced lattice support structures for metal additive manufacturing[J]. Journal of Materials Processing Technology，2013，213(7)：1019-1026.
[8] KANG K J. Wire-woven cellular metals：The present and future[J]. Progress in Materials Science，2015，69：213-307.
[9] XIONG J，WANG B，MA L，et al. Three-dimensional composite lattice structures fabricated by electrical discharge machining[J]. Experimental Mechanics，2014，54(3)：405-412.
[10] WONG K V，HERNANDEZ A. A review of additive manufacturing[J]. International Scholarly Research Notices Articles，2012，2012(1)：208760.
[11] MAZUR M，LEARY M，SUN S，et al. Deformation and failure behaviour of Ti-6Al-4V lattice structures manufactured by selective laser melting (SLM)[J]. The International Journal of Advanced Manufacturing Technology，2016，84：1391–1411.
[12] 杜心伟，魏艳红，沈泳华，等. 电弧增材制造装备系统与应用的发展现状[J]. 机械工程学报，2025，61(6)：92-102. DU Xinwei，WEI Yanhong，SHEN Yonghua，et al. Development status of wire arc additive manufacturing equipment system and application[J]. Journal of Mechanical Engineering，2025，61(6)：92-102.
[13] RADEL S，BORDREUIL C，SOULIÉ F，et al. CAM for on-line control for wire arc additive manufacturing[J]. Computer-Aided Design and Applications，2019，16(3)：558-569.
[14] RADEL S，DIOURTE A，SOULIÉ F，et al. Skeleton arc additive manufacturing with closed loop control[J]. Additive Manufacturing，2019，26：106-116.
[15] YE J，KYVELOU P，GILARDI F，et al. An end-to-end framework for the additive manufacture of optimized tubular structures[J]. IEEE Access，2021，9：165476-165489.
[16] LAGHI V，PALERMO M，GASPARINI G，et al. Computational design and manufacturing of a half-scaled 3D-printed stainless steel diagrid column[J]. Additive Manufacturing，2020，36：101505.
[17] MX3D. https：//mx3d.com/，2014.
[18] MX3D. https：//mx3d.com/industries/manufacturing/，2014.
[19] SILVESTRU V-A，ARIZA I，VIENNE J，et al. Performance under tensile loading of point-by-point wire and arc additively manufactured steel bars for structural components[J]. Materials & Design，2021，205：109740.
[20] WU B，PAN Z，YU Ziping，et al. Robotic skeleton arc additive manufacturing of aluminium alloy[J]. The International Journal of Advanced Manufacturing Technology，2021，114(9-10)：2945-2959.
[21] YU Z，PAN Z，DING D，et al. A practical fabrication strategy for wire arc additive manufacturing of metallic parts with wire structures[J]. The International Journal of Advanced Manufacturing Technology，2021，115(9-10)：3197-3212.
[22] YU Z，PAN Z，DING D，et al. A strut-based process planning method for wire arc additive manufacturing of lattice structures[J]. Journal of Manufacturing Processes，2021，65：283-298.
[23] YU Z，PAN Z，DING D，et al. Strut formation control and processing time optimization for wire arc additive manufacturing of lattice structures[J]. Journal of Manufacturing Processes，2022，79：962-974.
[24] BAGLIVO L，AVALLONE G，CASO M，et al. Design and prototyping wire arc additively manufactured aluminum alloy lattice structures[J]. The International Journal of Advanced Manufacturing Technology，2024，135(7-8)：3747-3764.
[25] ABE T，SASAHARA H. Layer geometry control for the fabrication of lattice structures by wire and arc additive manufacturing[J]. Additive Manufacturing，2019，28：639-648.
[26] HU Tianying，YU Shengfu，HU Anguo，et al. Path planning and forming of wire multi-arc additive collaborative manufacture for marine propeller bracket[J]. Journal of Manufacturing Processes，2021，68：1191-1201.
[27] HU Tianying，YU Shengfu，LI Yi，et al. Design of multi-arc collaborative additive manufacturing system and forming performance research[J]. Journal of Manufacturing Processes，2024，109：313-325.
[28] ZHENG B，YU S，TANG L，et al. Directed energy deposition-arc of aluminum-alloy curved-generatrix-shell pyramid lattice structure[J]. Journal of Manufacturing Processes，2022，84：587-599.
[29] ZHENG B，YU S，YU R，et al. Effects of process parameters on the accuracy of directed energy deposition-arc lattice structures[J]. Jom，2024，76(6)：3060-3072.
[30] ZHENG B，YU S，YU R，et al. Microstructure and properties of in situ Al₂O₃ particle-reinforced aluminium alloy lattice rods fabricated by wire-arc-directed energy deposition[J]. Journal of Materials Processing Technology，2024，327：118391.
[31] 郑博，余圣甫，禹润缜，等. 铝合金点阵结构电弧增材制造技术及应用[J]. 电焊机，2023，53(2)：87-96. ZHENG Bo，YU Shengfu，YU Runzhen，etc Aluminum alloy lattice structure arc additive manufacturing technology and application [J]. Welding Machine，2023，53(2)：87-96.
[32] WANG T，ZHOU X，ZHANG H. Control of forming process of truss structure based on cold metal transition technology[J]. Rapid Prototyping Journal，2021，28(2)：204-215.
[33] XU T，CUI Y，MA S，et al. Exploring the inclined angle limit of fabricating unsupported rods structures by pulse hot-wire arc additive manufacturing[J]. Journal of Materials Processing Technology，2021，295：117160.
[34] FU R，TANG S，LU J，et al. Hot-wire arc additive manufacturing of aluminum alloy with reduced porosity and high deposition rate[J]. Materials & Design，2021，199：109370.
[35] XU T，JING C，MAO H，et al. Parallel multi arc directed energy deposition：New way to achieve efficient manufacturing of large-size lattice sandwich structure[J]. Additive Manufacturing，2024，90：104322.
[36] XU T，TANG S，LIU C，et al. Obtaining large-size pyramidal lattice cell structures by pulse wire arc additive manufacturing[J]. Materials & Design，2020，187：108401.
[37] ZHANG H，HUANG J，LIU C，et al. Fabricating pyramidal lattice structures of 304 L stainless steel by wire arc additive manufacturing[J]. Materials (Basel)，2020，13(16)：3482.
[38] SILVESTRU VA，ARIZA I，TARAS A，et al. Structural behaviour of point-by-point wire arc additively manufactured steel bars under compressive loading[J]. Journal of Constructional Steel Research，2023，207： 107982.
[39] LAGHI V，PALERMO M，GASPARINI G，et al. Experimental results for structural design of wire-and-arc additive manufactured stainless steel members[J]. Journal of Constructional Steel Research，2020，167：105858.
[40] 徐田秋，敬晨晨，毛昊，等. 电弧增材制造金属点阵结构研究进展[J]. 电焊机，2023，53(2)：76-86. XU Tianqiu，JING Chenchen，MAO Hao，et al. Research progress on metal lattice structure in arc additive manufacturing [J]. Welding Machine，2023，53(2)：76-86
[41] AMCL. http：//www.amcl-auc.com/，2021.
[42] ARRÈ L，LAGHI V，PAOLA A M，et al. Tubular sandwich cross-sections fabricated with wire arc additive manufacturing for jumbo structural members[J]. Structures，2024，67：106689.
[43] LAGHI V，ARRÈ L，GASPARINI G，et al. Design strength parameters of dot-by-dot wire-and-arc additively manufactured stainless steel bars[J]. Structures，2025，71：107857.
[44] LAGHI V，GASPARINI G，TROMBETTI T，et al. Experimentally-validated buckling behavior of wire-arc additively manufactured stainless steel bars[J]. Engineering Structures，2025，330：119701.
[45] LAGHI V，GIRELLI V A，GASPARINI G，et al. Investigation on the elastic flexural stiffness of dot-by-dot wire-and-arc additively manufactured stainless steel bars[J]. Engineering Structures，2024，306：117680.
[46] WU B T，PAN Z X，YU Ziping，et al. Robotic skeleton arc additive manufacturing of aluminium alloy[J]. International Journal of Advanced Manufacturing Technology，2021，114(9-10)：2945-2959.
[47] CCTV节目官网. 瓣瓣同心京津冀协同发展十年[EB/OL].https：//tv.cctv.com/2024/02/26/VIDAqWZnNL Ksfu9fGuyLFcbi240226.shtml，2024. CCTV Programme Website. United in Heart：Ten Years of Coordinated Development in Beijing-Tianjin-Hebei [EB/OL]. https：//tv.cctv.com/2024/02/26/VIDAqWZnNL Ksfu9fGuyLFcbi240226.shtml，2024.
[48] 20米级组件一体成型. 全国最大金属3D打印在泰达落成[EB/OL]. https：//www.teda.gov.cn/contents/2478/ 77312.html，2024. 20-metre-scale components integrated formation. The largest metal 3D printer in China established in TEDA[EB/OL]. https：//www.teda.gov.cn/contents/ 2478/77312.html，2024.
[49] 协同加速跑. 京津冀协同发展奔赴新十年[EB/OL]. https：//www.teda.gov.cn/contents/13/79959.html，2024. Collaborative acceleration. Beijing-Tianjin-Hebei coordinated development strides into a new decade [EB/OL]. https：//www.teda.gov.cn/contents/13/79959. html，2024.
[50] 中国最大金属3D打印制造装备在天津落成[EB/OL]. https：//m.chinanews.com/wap/detail/chs/zw/10341711. shtml，2025. The largest metal 3D printing equipment in China was established in Tianjin[EB/OL]. https：//m.chinanews.com/ wap/detail/chs/zw/10341711.shtml，2025.
[51] LI Y，YU S，CHEN Y，et al. Wire and arc additive manufacturing of aluminum alloy lattice structure[J]. Journal of Manufacturing Processes，2020，50：510-519.
[52] XIONG J，YU Y，ZHANG G，et al. Layer width control in robotic pulsed gas tungsten arc additive manufacturing through composite sensing of vision and arc[J]. International Journal of Computer Integrated Manufacturing，2023，36(6)：881-893.
[53] XIONG J，ZHANG G. Online measurement of bead geometry in GMAW-based additive manufacturing using passive vision[J]. Measurement Science and Technology，2013，24(11)：115103.
[54] XIONG J，ZHANG K. Monitoring multiple geometrical dimensions in WAAM based on a multi-channel monocular visual sensor[J]. Measurement，2022，204：112097.
[55] ZHAO Z，DENG L，BAI L，et al. Optimal imaging band selection mechanism of weld pool vision based on spectrum analysis[J]. Optics & Laser Technology，2019，110：145-151.
[56] PAN J，LUO L，LU T，et al. In-Situ visual reconstruction of strut profiles in pulsed wire arc additive manufacturing of lattice structures[J]. Virtual and Physical Prototyping，2024，19(1)：e2425822.
[57] LE T N，LEE M H，LIN Z H，et al. Vision-based in-situ monitoring system for melt-pool detection in laser powder bed fusion process[J]. Journal of Manufacturing Processes，2021，68：1735-1745.
[58] MAO H，JING C，KONG F，et al. Improve the manufacturing efficiency of steel bars by using hot-wire pulse arc additive manufacturing[J]. Journal of Manufacturing Processes，2023，89：430-443.
[59] JING C，MAO H，XU T，et al. Fabricating 316 L stainless steel unsupported rods by controlling the flow of molten pool via wire arc additive manufacturing[J]. Journal of Materials Processing Technology，2023，319：118066.
[60] SI J S，LUO L X，LIU C M，et al. Arc length monitoring and closed-loop quality control for GTA-WAAM[J]. Virtual and Physical Prototyping，2025，20(1)：e2513004.