6061-T6铝合金薄板剪切试件设计及动态剪切力学特性分析

doi:10.3901/JME.2023.04.062

机械工程学报 ›› 2023, Vol. 59 ›› Issue (4): 62-70.doi: 10.3901/JME.2023.04.062

扫码分享

6061-T6铝合金薄板剪切试件设计及动态剪切力学特性分析

陈鑫, 王佳宁, 杨立飞, 张冠宸

吉林大学汽车仿真与控制国家重点实验室长春 130022

收稿日期:2022-03-24 修回日期:2022-08-29 出版日期:2023-02-20 发布日期:2023-04-24
通讯作者: 王佳宁(通信作者),女,1995年出生,博士研究生。主要研究方向为汽车车身结构轻量化设计及连接技术。E-mail:wangjn0328@foxmail.com
作者简介:陈鑫,男,1974年出生,博士,教授,博士研究生导师。主要研究方向为汽车车身结构及轻量化设计、汽车NVH与控制。E-mail:cx@jlu.edu.cn
基金资助:
国家重点研发计划(2016YFB0101601-7)、吉林大学研究生创新基金(10832020CX134)资助项目。

Shear Specimens and Dynamic Shear Mechanical Properties of 6061-T6 Aluminum Alloy Sheets

CHEN Xin, WANG Jianing, YANG Lifei, ZHANG Guanchen

State Key Laboratory of Automotive Simulation and Control, Jilin University, Changchun 130022

Received:2022-03-24 Revised:2022-08-29 Online:2023-02-20 Published:2023-04-24

摘要/Abstract

摘要： 车身结构影响了整车的碰撞安全性，其中车身承载部件在碰撞过程中主要表现为剪切失效，因此需要对车身材料的动态剪切力学特性展开研究。为了描述6061-T6铝合金材料在复杂工况下的力学特性，进行了准静态和动态力学性能试验。基于不同应力状态和应变率下铝合金力学性能的测试数据，标定了材料的本构模型和断裂模型参数，并通过对比试验与仿真结果验证了材料参数的准确性。为了实现拉伸试验机开展铝合金薄板剪切试验，设计四种形状的薄板剪切试件，采用数值模拟对比所设计剪切试件的应力及应变分布，并分析不同剪切应变率对6061-T6铝合金材料剪切力学特性的影响规律。结果表明：圆形开口对称试件适用于研究塑性变形阶段的失效断裂，而圆形开口偏置试件适用于研究弹性变形阶段的应力应变关系。在低剪切应变率范围内，6061-T6铝合金无显著的应变率强化效应，然而随着应变率的增加敏感性有所提高。

关键词: 铝合金薄板, 剪切试件, 剪切力学特性, 应变率, 数值模拟分析

Abstract: The body structure is of great significance to the crashworthiness of automobiles, and the load-bearing parts mainly show shear failure during collision. Therefore, it is necessary to study dynamic shear properties of body materials. In order to study the mechanical properties of 6061-T6 aluminum alloy under complex working conditions, quasi-static and dynamic tests were carried out. The parameters of the constitutive and damage models of aluminum alloy were determined based on experiments. By comparing the experimental and numerical simulation result, the accuracy of the material parameters was verified. In order to carry out the shear test of aluminum alloy sheets using the universal tensile testing machine, four kinds of thin-sheet shear specimens were designed. Additionally, the finite element simulation was performed to compare the stress and strain distribution, followed by investigating the influence mechanism of shear strain rates on mechanical properties of 6061-T6 aluminum alloy. The results show that the symmetric circular notched shear specimen is suitable for testing shear fracture strain in plastic stage, while the offset circular notched shear specimen is suitable for testing shear modulus in elastic stage. Moreover, in the case of low shear strain rate, the 6061-T6 aluminum alloy has no significant strain rate effect; however, the sensitivity increases slightly with the increase of strain rate.

Key words: aluminum alloy sheets, shear specimens, shear mechanical properties, strain rate, numerical simulation analysis

中图分类号:

TG146

陈鑫, 王佳宁, 杨立飞, 张冠宸. 6061-T6铝合金薄板剪切试件设计及动态剪切力学特性分析[J]. 机械工程学报, 2023, 59(4): 62-70.

CHEN Xin, WANG Jianing, YANG Lifei, ZHANG Guanchen. Shear Specimens and Dynamic Shear Mechanical Properties of 6061-T6 Aluminum Alloy Sheets[J]. Journal of Mechanical Engineering, 2023, 59(4): 62-70.

参考文献

[1] 王智文,孙希庆,项生田,等. 铝合金前保险杠横梁的应用研究[J]. 汽车工程,2015,37(3):8-11. WANG Ziwen,SUN Xiqing,XIANG Shengtian,et al. A reasearch on the application of aluminum alloy front bumper beam[J]. Automotive Engineering,2015,37(3):8-11.
[2] MUSFIRAH A H,JAHARAH A G. Magnesium and aluminum alloys in automotive industry[J]. Journal of Applied Sciences Research,2012,8(9):4865-4875.
[3] JIA Zhihong,DING Lipeng,WU Sainan,et al. Research progress on microstructure and heat treatment of 6000 series aluminum alloys sheet for automotive body[J]. Journal of Materials Engineering,2014(12):104-113.
[4] 孙巍,静宇,佟伟平,等. 汽车用6005A-T6铝合金动态力学性能研究[J]. 稀有金属材料与工程,2021,50(6):2118-2124. SUN Wei,JING Yu,TONG Weiping,et al. Dynamic mechanical property of 6005A-T6 aluminum alloy for automotive use[J]. Rare Metal Materials and Engineering,2021,50(6):2118-2124.
[5] 陈静,徐森,刘震,等. 基于碰撞安全性的铝合金吸能盒轻量优化[J]. 汽车工程,2021,43(2):241-247. CHEN Jing,XU Sen,LIU Zhen,et al. Lightweight optimization of aluminum alloy energy absorbing box for crash safety[J]. Automotive Engineering,2021,43(2):241-247.
[6] BAO Yingbin,WIERZBICKI T. On fracture locus in the equivalent strain and stress triaxiality space[J]. International Journal of Mechanical Sciences,2004,46(1):81-98.
[7] PEIRS J,VERLEYSEN P,DEGRIECK J. Novel technique for static and dynamic shear testing of Ti6Al4V sheet[J]. Experimental Mechanics,2012,52(7):729-741.
[8] 高付海,桂良进,范子杰. 两种新型单拉平板剪切试件的设计与对比[J]. 清华大学学报,2010,50(2):299-302. GAO Fuhai,GUI Liangjin,FAN Zijie. Design and comparison of two new in-plane shear specimens[J]. Journal of Tsinghua University,2010,50(2):299-302.
[9] YIN Qing,ZILLMANN B,SUTTNER S,et al. An experimental and numerical investigation of different shear test conﬁgurations for sheet metal characterization[J]. International Journal of Solids and Structures,2014(51):1066-1074.
[10] MIYAUCHI K. A proposal of a planar simple shear test in sheet metals[J]. Scientific Papers of the Institute of Physical and Chemical Research (Japan),1984,78(3):27-40.
[11] ZILLMANN B,CLAUSMEYER T,BARGMANN S,et al. Validation of simple shear tests for parameter identification considering the evolution of plastic anisotropy[J]. Technische Mechanik,2012,32(2-5):622-630.
[12] DOROGOY A,KARP B,RITTEL D. A shear compression disk specimen with controlled stress triaxiality under quasi-static loading[J]. Experimental Mechanics,2011,51(9):1545-1557.
[13] 徐芹所,庄新村,方勇勇,等. 一种新的金属板料双向压缩剪切试验方法[J]. 上海交通大学学报,2015,49(10):1510-1515. XU Qinsuo,ZHUANG Xincun,FANG Yongyong,et al. A novel test method for symmetrical sheet metal compression-shear[J]. Journal of Shanghai Jiaotong University,2015,49(10):1510-1515.
[14] 胡建良,焦子腾,金淼,等. 7A85铝合金塑性变形过程位错密度模型[J]. 中国有色金属学报,2020,30(6):1263-1269. HU Jianliang,JIAO Ziteng,JIN Miao,et al. Dislocation density model of 7A85 aluminum alloy during plastic deformation process[J]. The Chinese Journal of Nonferrous Metals,2020,30(6):1263-1269.
[15] 高玉龙,孙晓红. 高速列车用6008铝合金动态变形本构与损伤模型参数研究[J]. 爆炸与冲击,2021,41(3):118-129. GAO Yulong,SUN Xiaohong. Investigation on the parameters of dynamic deformation and damage models of high speed railway vehicle aluminum alloys[J]. Explosion and Shock Waves,2021,41(3):118-129.
[16] 傅垒,王宝雨,林建国,等. 耦合位错密度的6111铝合金热变形本构模型[J]. 北京科技大学学报,2013,35(10):1333-1339. FU Lei,WANG Baoyu,LIN Jianguo,et al. Constitutive model coupled with dislocation density for hot deformation of 6111 aluminum alloy[J]. Journal of University of Science and Technology Beijing,2013,35(10):1333-1339.
[17] 邓云飞,张永,吴华鹏,等. 6061-T651铝合金动态力学性能及J-C本构模型的修正[J]. 机械工程学报,2020,56(20):74-81. DENG Yunfei,ZHANG Yong,WU Huapeng,et al. Dynamic mechanical properties and modification of J-C constitutive model of 6061-T651 aluminum alloy[J]. Journal of Mechanical Engineering,2020,56(20):74-81.
[18] Shrot A,Bäker M. Determination of Johnson-Cook parameters from machining simulations[J]. Computational Materials Science,2012,52(1):298-304.
[19] 王新云,石婵,邓磊,等. 2024铝合金高温损伤模型的建立及其应用[J]. 塑性工程学报,2019,26(6):120-127. WANG Xinyun,SHI Chan,DENG Lei,et al. Establishment and application of high temperature damage model for 2024 aluminum alloy[J]. Journal of Plasticity Engineering,2019,26(6):120-127.
[20] Bal B,Karaveli K K,Cetin B,et al. The precise determination of the Johnson-Cook material and damage model parameters and mechanical properties of an aluminum 7068-T651 alloy[J]. Journal of Engineering Materials and Technology,2019,141(4):041001.1-041001.10.
[21] 朱浩,齐芳娟,张洋. 剪应力状态下6061铝合金的力学性能及断裂行为[J]. 中国有色金属学报,2012,22(6):1570-1576. QI Hao,QI Fangjuan,ZHANG Yang. Mechanical properties and fracture behavior of 6061aluminum alloy under shear stress states[J]. The Chinese Journal of Nonferrous Metals,2012,22(6):1570-1576.

6061-T6铝合金薄板剪切试件设计及动态剪切力学特性分析

Shear Specimens and Dynamic Shear Mechanical Properties of 6061-T6 Aluminum Alloy Sheets

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 14

编辑推荐

Metrics

本文评价

[1]	徐腾, 邓春阳, 冉家琪, 龚峰, 唐恒. 金属的应变率效应及其动态本构研究进展[J]. 机械工程学报, 2024, 60(2): 81-98.
[2]	刘欢, 黄瑞源, 蒋东, 秦健, 文彦博, 张延泽. 硬质聚氨酯泡沫塑料的应变率效应研究[J]. 机械工程学报, 2023, 59(16): 192-203.
[3]	周迅, 张振涛, 高云, 尉朋, 潘骏, 陈文华. 铝合金冲压件疲劳损伤规律的试验研究[J]. 机械工程学报, 2023, 59(10): 117-123.
[4]	李建军, 朱文峰. 基于SPH的平面曲线铝合金薄板滚压成形数值仿真与试验研究[J]. 机械工程学报, 2020, 56(24): 61-71.
[5]	樊译璘, 阚前华, 赵吉中, 徐祥, 康国政. 不同钢轨材料棘轮行为试验研究[J]. 机械工程学报, 2020, 56(2): 35-42.
[6]	杨萍, 崔金磊, 刘晓玲, 杨沛然. 关于润滑油流变特性研究中一个常用假设的深入探讨[J]. 机械工程学报, 2017, 53(19): 195-200.
[7]	刘佳, 杨玉东, 石岩, 张宏, 陈星. 基于Visual-Environment的复杂结构薄壁件激光焊接工艺优化[J]. 机械工程学报, 2017, 53(14): 150-158.
[8]	兰凤崇;曾繁波;周云郊;陈吉清. 闭孔泡沫铝力学特性及其在汽车碰撞吸能中的应用研究进展[J]. , 2014, 50(22): 97-112.
[9]	郑战光;谢昌吉;孙腾;袁帅. 一种超细晶材料的混合硬化模型及其数值模拟[J]. , 2014, 50(20): 77-83.
[10]	于忠奇;侯波;李淑慧;林忠钦. 耦合温度和应变率的铝合金板成形极限预测方法[J]. , 2010, 46(8): 37-41.
[11]	包卫平;赵昱臻;李春明;任学平. 纯铁高温高应变率下的动态本构关系试验研究[J]. , 2010, 46(4): 74-79.
[12]	陈贵江;康永林;朱国明;吕超. 汽车用合金化镀锌深冲钢板动态变形行为试验研究及仿真分析[J]. , 2010, 46(24): 10-15.
[13]	高桂丽;李大勇;董静薇;石德全;石旭东. 铝合金薄板疲劳裂纹的非线性声学特性[J]. , 2010, 46(18): 71-76.
[14]	王青春;范子杰;桂良进;王政红;付自来. 泡沫铝填充帽型结构轴向冲击吸能特性的试验研究[J]. , 2006, 42(4): 101-106.