[1] GREBENSTEIN M,CHALON M,FRIEDL W,et al. The hand of the DLR hand arm system:Designed for interaction[J]. International Journal of Robotics Research,2012,31(13):1531-1555. [2] LI Changsheng,GU Xiaoyi,REN Hongliang. A cable driven flexible robotic grasper with lego-like modular and reconfigurable joints[J]. IEEE/ASME Transaction on Mechatronics,2017,22(6):2757-2767. [3] FIROUZEH A,PAIK J. Grasp mode and compliance control of an under-actuated origami gripper using adjustable stiffness joints[J]. IEEE/ASME Transaction on Mechatronics,2017,22(5):2165-2773. [4] WANG Congzhe,FANG Yuefa,GUO Sheng. Multi-objective optimization of a parallel ankle rehabilitation robot using modified differential evolution algorithm[J]. Chinese Journal of Mechanical Engineering,2015,28(4):702-715 [5] QI Xiaozhi,HUANG Hailin,MIAO Zhihuai,et al. Design and mobility analysis of large deployable mechanisms based on plane-symmetric bricard linkage[J]. Transactions of the ASME:Journal of Mechanical Design,2016,139(2):022302. [6] ZENG Qiang,FANG Yuefa. Structural synthesis and analysis of serial-parallel hybrid mechanisms with spatial multi-loop kinematic chains[J]. Mechanism and Machine Theory,2012,49(3):198-215. [7] JIA Guanglu,HUANG Hailin,LI Bing,et al. Synthesis of a novel type of metamorphic mechanism module for large scale deployable grasping manipulators[J]. Mechanism and Machine Theory,2018,128:544-559. [8] LI Guotao,HUANG Hailin,GUO Hongwei,et al. Dynamic modeling and control for a deployable grasping manipulator[J]. IEEE Access,2019,7:23000-23011. [9] LI Guotao,HUANG Hailin,GUO Hongwei,et al. Design,analysis and control of a novel deployable grasping manipulator[J]. Mechanism and Machine Theory, 2019,138:182-204. [10] LIU Wenlan,XU Yundou,YAO Jiantao,et al. Methods for force analysis of overconstrained parallel mechanisms:A review[J]. Chinese Journal of Mechanical Engineering,2017,30(6):1460-1472. [11] 王向阳,郭盛,曲海波,等. 并联机构驱动力优化配置方法及应用研究[J]. 机械工程学报,2019,55(1):32-41. WANG Xiangyang,GUO Sheng,QU Haibo,et al. Force analysis of lower-mobility parallel mechanisms with over-constrained couples[J]. Journal of Mechanical Engineering,2019,55(1):32-41. [12] XU Yundou,LIU Wenlan,YAO Jiantao,et al. A method for force analysis of the overconstrained lower mobility parallel mechanism[J]. Mechanism and Machine Theory,2015,88:31-48. [13] 赵燕,黄真. 含过约束力偶的少自由度并联机构的受力分析[J]. 机械工程学报,2010,46(5):15-21. ZHAO Yan,HUANG Zhen. Force analysis of lower-mobility parallel mechanisms with over-constrained couples[J]. Journal of Mechanical Engineering,2010,46(5):15-21. [14] HAN Jingqing. From PID to active disturbance rejection control[J]. IEEE Transaction on Industrial Electronics,2009,56(3):900-906. [15] 韩京清. 从PID技术到"自抗扰控制"技术[J]. 控制工程,2002,9(3):13-18. HAN Jingqing. From PID technique to active disturbances rejection control technique[J]. Control Engineering of China,2002,9(3):13-18. [16] LI Guotao,XU Wenfu,ZHAO Jianguo,et al. Precise robust adaptive dynamic surface control of permanent magnet synchronous motor based on extended state observer[J]. IET Science Measurement and Technology,2017,11(5):590-599. [17] YAO Bin,BU Fanping,REEDY J,et al. Adaptive robust motion control of single-rod hydraulic actuators:Theory and experiments[J]. IEEE/ASME Transaction on Mechatronics,2000,5(1):79-91. [18] YAO Jianyong,JIAO Zongxia,MA Dawei. Adaptive robust control of DC motors with extended state observer[J]. IEEE Transaction on Industrial Electronics,2014,61(7):3630-3637. [19] YAO Jianyong,DENG Wenxiang,JIAO Zongxia. Adaptive control of hydraulic actuators with LuGre model-Based friction compensation[J]. IEEE Transactions on Industrial Electronics,2015,62(10):6469-6477. [20] ZHENG Qing,GAO L Q,GAO Zhiqing. On stability analysis of active disturbance rejection control for nonlinear time-varying plants with unknown dynamics[C]//The 46th IEEE Conference on Decision and Control,December 12-14,2007,New Orleans,LA,USA. New York:IEEE,2008:3501-3506. [21] XU Li,YAO Bin. Adaptive robust precision motion control of linear motors with negligible electrical dynamics:Theory and experiments[J]. IEEE/ASME Transactions on Mechatronics,2001,6(4):444-452. [22] GOODWIN G C,MAYNE D Q. A parameter estimation perspective of continuous time model reference adaptive control[J]. Automatica,1987,23(1):57-70. [23] NA Jing,CHEN Qiang,REN Xuemei,et al. Adaptive prescribed performance motion control of servo mechanisms with friction compensation[J]. IEEE Transaction on Industrial Electronics,2014,61(1):486-494. |