• CN:11-2187/TH
  • ISSN:0577-6686

机械工程学报 ›› 2026, Vol. 62 ›› Issue (17): 334-345.doi: 10.3901/JME.260650

• 机器人及机构学 • 上一篇    

扫码分享

刚柔耦合躯干康复机器人机构设计与运动学分析

冯永飞1, 林木松2, 李廉清3, 刘亦诺3, 李世杰1, 王洪波3,4, 牛建业3   

  1. 1. 宁波大学机械工程与力学学院 宁波 315211;
    2. 河北环境工程学院环境工程系 秦皇岛 066102;
    3. 燕山大学机械工程学院 秦皇岛 066000;
    4. 复旦大学工程与应用技术研究院 上海 200433
  • 收稿日期:2025-12-04 修回日期:2026-04-02 发布日期:2026-11-20
  • 作者简介:冯永飞,男,1988年出生,博士,讲师,硕士研究生导师。主要研究方向为医疗康复机器人、并联机器人理论与应用。E-mail:fengyongfei@nbu.edu.cn;牛建业(通信作者),男,1982年出生,博士,教授,博士研究生导师。主要研究方向为医疗康复机器人、并联机器人理论与应用。E-mail:jyniu@ysu.edu.cn
  • 基金资助:
    国家自然科学基金(52305025,52275034)、河北省自然科学基金(E2023203057)、中国博士后科学基金(2023M740662)资助项目和宁波市科创甬江2035科创生态育成项目(2024Z062)资助项目。

Mechanism Design and Kinematic Analysis of a Rigid-flexible Coupled Trunk Rehabilitation Robot

FENG Yongfei1, LIN Musong2, LI Lianqing3, LIU Yinuo3, LI Shijie1, WANG Hongbo3,4, NIU Jianye3   

  1. 1. School of Mechanical Engineering and Mechanics, Ningbo University, Ningbo 315211;
    2. Department of Environmental Engineering, Hebei University of Environmental Engineering, Qinhuangdao 066102;
    3. School of Mechanical Engineering, Yanshan University, Qinhuangdao 066000;
    4. Academy for Engineering and Technology, Fudan University, Shanghai 200433
  • Received:2025-12-04 Revised:2026-04-02 Published:2026-11-20

摘要: 针对神经系统损伤患者常见的躯干姿态控制障碍问题,提出一种新型刚柔耦合串并混联躯干康复机器人系统。结合人体胸腰椎生理结构与运动中心特性,构建了由柔性气动调姿背心与4UPS-RRR腰椎段刚性外骨骼机构组成的双层协同康复构型,实现胸椎柔顺调姿与腰椎稳定支撑。设计并完成了内嵌式气动肌肉的模具浇筑工艺与成型流程,建立了可根据患者体型实现运动中心自适配的约束支链共点建模方法。分别构建了上下层结构的运动学模型,并通过实验平台完成参数辨识与ADAMS仿真验证。搭建样机并开展调姿控制、姿态跟踪与驱动力分布实验,结果表明:柔性模块姿态误差小于10%,腰椎段刚性外骨骼机构跟踪精度良好,推杆受力均匀,验证了所提结构与控制策略的有效性。本研究为实现高适应性、高协同性的躯干康复训练提供了新思路与技术支撑。

关键词: 躯干康复机器人, 刚柔耦合, 气动肌肉, 串并混联机构

Abstract: To address the common issue of impaired trunk posture control in patients with neurological injuries, this research proposes a novel trunk rehabilitation robot with rigid–flexible coupled serial-parallel hybrid structure. Based on the physiological structure and motion center characteristics of the thoracolumbar spine, a dual-layer coordinated rehabilitation configuration is developed, consisting of a pneumatically actuated flexible upper vest and a 4UPS-RRR rigid lumbar exoskeleton mechanism, enabling compliant thoracic adjustment and stable lumbar support. The fabrication mold and casting process of the embedded pneumatic artificial muscles are designed, and a constraint chain co-point modeling method is established to achieve automatic alignment with the trunk motion center across different patient body types. Kinematic models are constructed for the upper and lower modules, respectively, and verified through parameter identification and ADAMS simulation. A prototype system is developed and validated through a series of functional experiments, including posture regulation, motion tracking, and actuator force distribution. Experimental results show that the posture error of the flexible module is less than 10%, the rigid lumbar exoskeleton mechanism achieves high tracking accuracy, and the forces of the actuating rods are evenly distributed. These findings confirm the effectiveness of the proposed structure and control strategy. This research provides a new approach and technical support for achieving highly adaptive and coordinated trunk rehabilitation training.

Key words: trunk rehabilitation robot, rigid-flexible coupling, pneumatic artificial muscle, serial-parallel hybrid mechanism

中图分类号: