• CN:11-2187/TH
  • ISSN:0577-6686

机械工程学报 ›› 2024, Vol. 60 ›› Issue (10): 425-438.doi: 10.3901/JME.2024.10.425

• 先进控制技术 • 上一篇    下一篇

扫码分享

四轮分布式线控转向系统稳定与协调控制研究

张寒1,2, 刘开华1,2, 王春燕1,2, 赵万忠1,2, 栾众楷1,2   

  1. 1. 南京航空航天大学能源与动力学院 南京 210000;
    2. 江苏省车辆分布式驱动与智能线控技术工程研究中心 南京 210016
  • 收稿日期:2023-07-14 修回日期:2024-02-03 出版日期:2024-05-20 发布日期:2024-07-24
  • 作者简介:张寒,女,1991年出生,博士,讲师。主要研究方向为汽车主动安全与控制。
    E-mail:zhanghannuaa@nuaa.edu.cn
    刘开华,男,2000年出生,硕士研究生。主要研究方向为分布式线控转向系统控制。
    E-mail:liukaihua@nuaa.edu.cn
    王春燕,女,1977年出生,博士,教授,博士研究生导师。主要研究方向为汽车系统动力学与控制。
    E-mail:wcy2000@126.com
    赵万忠,男,1982年出生,教授,博士研究生导师。主要研究方向为分布式汽车线控底盘技术。
    E-mail:zwz@nuaa.edu.cn
    栾众楷,男,1994年出生,博士。主要研究方向为汽车线控底盘控制技术。
    E-mail:zkluan@nuaa.edu.cn
  • 基金资助:
    国家自然科学基金(52102435,52072175)、中央高校基本科研业务费(NS2022030)、江苏省杰出青年基金(BK20220078)、江苏省重点研发计划(BE2022053)和江苏省卓博计划(2023ZB682)资助项目。

Research on Stability and Coordination Control of Four-wheel Distributed Steering-by-wire System

ZHANG Han1,2, LIU Kaihua1,2, WANG Chunyan1,2, ZHAO Wanzhong1,2, LUAN Zhongkai1,2   

  1. 1. College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210000;
    2. Vehicle Distribute Drive and Intelligent Control-by-wire Technology Research Center of Jiangsu Province, Nanjing 210016
  • Received:2023-07-14 Revised:2024-02-03 Online:2024-05-20 Published:2024-07-24

摘要: 四轮分布式线控转向车辆拥有四个独立控制的车轮,在行驶过程中受到外界干扰时容易导致四个车轮转角响应不同步,从而影响车辆行驶稳定性。提出一种分层式四轮分布式线控转向系统稳定与协调控制策略,上层采用模型预测控制算法计算参考四轮转角对理想的横摆角速度和质心侧偏角进行跟踪从而实现车辆的稳定性控制,下层采用超扭转二阶滑模控制算法跟踪上层计算出的参考车轮转角,提高执行机构响应速度和精度,消除干扰影响。通过Carsim和Matlab/Simulink联合仿真对提出的稳定与协调控制策略进行不同工况下的仿真验证。结果表明,在受到外界干扰时,所提出的稳定与协调控制策略能够大幅降低转向执行机构的跟踪时延,提高横摆角速度和质心侧偏角的跟踪效果,有效提升四轮分布式线控转向车辆的稳定性。

关键词: 线控转向, 四轮分布式转向, 模型预测控制, 滑模控制, 车轮转角跟踪, 协调控制

Abstract: Four separately controlled wheels on four-wheel distributed steer-by-wire vehicles can easily result in out-of-phase wheel rotation responses when driving, which can cause instability. A hierarchical four-wheel distributed steering system stability and coordination control approach is proposed. The upper layer calculates reference four wheel steering angles using a model predictive control method to track the ideal yaw rate and sideslip angle, accomplishing vehicle stability control. To actuate the reference wheel angles generated by the upper layer, the lower layer employs a super-twisting second-order sliding mode control method, which improves the actuator's response speed and precision while reducing the influence of disturbances. Through collaborative simulation using Carsim and Matlab/Simulink under various operating situations, the proposed stability and coordination control technique is validated. The results demonstrate that the proposed stability and coordination control strategy can effectively increase the stability of the four-wheel distributed steer-by-wire vehicle by reducing the tracking delay of the steering actuator when subjected to external disturbances and improving the tracking performance of the yaw rate and sideslip angle.

Key words: steer-by-wire, four-wheel distributed steering, model predictive control, sliding mode control, wheel steering angle tracking, coordination control

中图分类号: