模型与数据融合的大尺寸快充锂电池分布式温度估计

doi:10.3901/JME.2023.22.020

机械工程学报 ›› 2023, Vol. 59 ›› Issue (22): 20-32.doi: 10.3901/JME.2023.22.020

• 特邀专栏：动力电池安全应用技术 • 上一篇下一篇

扫码分享

模型与数据融合的大尺寸快充锂电池分布式温度估计

庞晓青¹, 李佳承^1,2, 刘文学¹, 邓忠伟^1,2, 胡晓松^1,2

1. 重庆大学机械与运载工程学院重庆 400044;
2. 重庆大学机械传动国家重点实验室重庆 400044

收稿日期:2022-11-28 修回日期:2023-03-05 出版日期:2023-11-20 发布日期:2024-02-19
通讯作者: 李佳承(通信作者)，男，1991年出生，硕士，工程师。主要研究方向为动力电池建模、状态估计和热管理。E-mail：lijiacheng91@foxmail.com
作者简介:庞晓青，女，1997年出生。主要研究方向为动力电池状态估计。E-mail：xiaoqingpang@cqu.edu.cn
基金资助:
科技部国家重点研发计划课题(2022YFB3305403)、国家自然科学基金(52111530194)、重庆市研究生科研创新(CYB21009)和重庆大学研究生教育教学改革研究(cquyjg21321)资助项目。

Estimation of Distributed Temperature of Large-format Fast-charging Lithium-ion Batteries Based on a Model-data Fusion Method

PANG Xiaoqing¹, LI Jiacheng^1,2, LIU Wenxue¹, DENG Zhongwei^1,2, HU Xiaosong^1,2

1. College of Mechanical and Vehicle Engineering, Chongqing University, Chongqing 400044;
2. State Key Laboratory of Mechanical Transmissions, Chongqing University, Chongqing 400044

Received:2022-11-28 Revised:2023-03-05 Online:2023-11-20 Published:2024-02-19

摘要/Abstract

摘要： 充电时间长、续航里程短、热安全性差等问题正成为阻碍电动汽车大规模应用的主要因素。高安全无损快充和高比能电池技术正成为发展趋势，具体表现为充电功率快速和电池单体大型化提高。然而，大尺寸锂离子电池的温度不一致性问题明显，高功率充电容易导致电池温度快速升高甚至引发热失控。因此，针对快充场景，开发准确高效的温度估计方法尤为重要。针对软包型锂离子电池的分布式温度估计问题，提出一种基于长短期记忆神经网络(Long short-term memory， LSTM)与产热模型融合的方法，并在 5～40 ℃的宽温度区间以及多种快充场景下验证了方法的适用性。该方法仅基于一个温度测点的温度信息即可准确估计电池平面其余多个关键测点的温度，可近似获取大尺寸电池二维的温度分布情况，包括最高温度和最大温差，还能有效降低电池成组时的传感器布置成本。融合模型将产热模型结果作为 LSTM 模型输入，讨论不同温度测点以及不同产热模型作为输入对模型精度的影响。结果表明，温度测点的选择对模型精度影响明显，相比于正极极耳温度，将正极极耳与电池本体连接处温度作为输入，其他测点的估计方均根误差可降低 50%，最大误差仅为 0.239 ℃。相较于无产热输入，选择接近电池分布式产热情况的产热模型，估计值方均根误差可减小约 11%。

关键词: 软包型锂离子电池, 快充, 产热模型, 数据驱动, 分布式温度估计

Abstract: Problems such as long charging time, short mileage, and poor thermal safety are becoming the major factors hindering the large-scale penetration of electric vehicles. High-specific-energy battery technologies and high-safety and damage-free fast charging are becoming popular, reflecting in the larger-sized battery cell and rapidly increased charging power. However, the temperature unevenness within the large-format lithium-ion battery is evident and high-power charging is prone to cause a rapidly elevated temperature and even thermal runaways. Therefore, it is of great importance to propose an accurate and efficient temperature estimation method for fast-charging batteries. A fusion method integrating a long short-term memory(LSTM) network and a heat generation model is proposed for estimating the distributed temperature of pouch-type lithium-ion batteries. The generalizability of the method is verified in a wide temperature ranging from 5 to 40 °C and a variety of fast charging scenarios. This method accurately estimates the temperatures of remaining key measurement locations on the battery plane based on the temperature information of only one measurement location. It can not only obtain the approximate two-dimensional temperature distribution of large-format batteries, including the highest temperature and maximum temperature difference, but greatly reduce the cost of temperature sensors when battery grouping. The fusion model takes the output of the heat generation model as the input of the LSTM model, and the effects of the measurement location and heat generation model on the fusion model’s accuracy are discussed. The results show that the selection of temperature measurement locations has a great impact on the prediction accuracy of the model. Compared to the positive tab temperature, taking the temperature measurement at the connection of the positive tab and main battery body as the input can reduce the root mean square error(RMSE) of the remaining measurement locations by 50%, and the maximum RMSE is only 0.239 °C. Compared to the model without heat generation as its input, the heat generation model optimally simulating distributed heat generation of the battery can reduce the RMSE of the model by about 11%.

Key words: pouch-type lithium-ion battery, fast charging, heat generation model, data-driven, estimation of distributed temperature

中图分类号:

U469

庞晓青, 李佳承, 刘文学, 邓忠伟, 胡晓松. 模型与数据融合的大尺寸快充锂电池分布式温度估计[J]. 机械工程学报, 2023, 59(22): 20-32.

PANG Xiaoqing, LI Jiacheng, LIU Wenxue, DENG Zhongwei, HU Xiaosong. Estimation of Distributed Temperature of Large-format Fast-charging Lithium-ion Batteries Based on a Model-data Fusion Method[J]. Journal of Mechanical Engineering, 2023, 59(22): 20-32.

参考文献

[1] WANG Q, JIANG B, LI B, et al. A critical review of thermal management models and solutions of lithium-ion batteries for the development of pure electric vehicles[J]. Renewable and Sustainable Energy Reviews, 2016, 64:106-128.
[2] LI H X, QI C. Modeling of distributed parameter systems for applications-A synthesized review from time-space separation[J]. Journal of Process Control, 2010, 20(8):891-901.
[3] RICHARDSON R R, ZHAO S, HOWEY D A. On-board monitoring of 2-D spatially-resolved temperatures in cylindrical lithium-ion batteries:Part II. State estimation via impedance-based temperature sensing[J]. Journal of Power Sources, 2016, 327:726-735.
[4] 陈泽宇,张渤,熊瑞,等. 动力电池低温极速自加热系统加热一致性及其影响因素的建模分析[J]. 机械工程学报, 2021, 57(22):226-236. CHEN Zeyu, ZHANG Bo, XIONG Rui, et al. Modeling analysis of heating consistency and influencing factors of low-temperature extreme-speed self-heating system of battery[J]. Journal of Mechanical Engineering, 2021, 57(22):226-236.
[5] FENG F, TENG S, LIU K, et al. Co-estimation of lithium-ion battery state of charge and state of temperature based on a hybrid electrochemical-thermal-neural-network model[J]. Journal of Power Sources, 2020, 455:227935.
[6] DAI H, ZHU L, ZHU J, et al. Adaptive Kalman filtering based internal temperature estimation with an equivalent electrical network thermal model for hard-cased batteries[J]. Journal of Power Sources, 2015, 293:351-365.
[7] ZHANG C, LI K, DENG J. Real-time estimation of battery internal temperature based on a simplified thermoelectric model[J]. Journal of Power Sources, 2016, 302:146-154.
[8] 刘文学. 动力型锂离子电池面向控制的热模拟与温度估计研究[D]. 重庆:重庆大学, 2020. LIU Wenxue. Study on control-oriented thermal modeling and temperature estimation for traction lithium-ion batteries[D]. Chongqing:Chongqing University, 2020.
[9] SRINIVASAN R, CARKHUFF B G, BUTLER M H, et al. Instantaneous measurement of the internal temperature in lithium-ion rechargeable cells[J]. Electrochimica Acta, 2011, 56(17):6198-6204.
[10] SCHMIDT J P, ARNOLD S, LOGES A, et al. Measurement of the internal cell temperature via impedance:Evaluation and application of a new method[J]. Journal of Power Sources, 2013, 243:110-117.
[11] ZHU J G, SUN Z C, WEI X Z, et al. A new lithium-ion battery internal temperature on-line estimate method based on electrochemical impedance spectroscopy measurement[J]. Journal of Power Sources, 2015, 274:990-1004.
[12] RICHARDSON R R, HOWEY D A. Sensorless battery internal temperature estimation using a Kalman filter with impedance measurement[J]. IEEE Transactions on Sustainable Energy, 2017, 6(4):1190-1199.
[13] OJO O, LIN X, LANG H, et al. A recurrent neural networks approach for estimating the core temperature in lithium-ion batteries[C]//Canadian Society for Mechanical Engineering International Congress. Charlottetown, PE, Canada:CSME Congress, 2020:1-6.
[14] OJO O, LANG H, KIM Y, et al. A neural network based method for thermal fault detection in lithium-ion batteries[J]. IEEE Transactions on Industrial Electronics, 2020, 68(5):4068-4078.
[15] JIANG Y H, YU Y F, HUANG J Q, et al. Li-ion battery temperature estimation based on recurrent neural networks[J]. Science China Technological Sciences, 2021, 64(6):1335-1344.
[16] LI M, DONG C, MU Y, et al. Data-model alliance network for the online multi-step thermal warning of energy storage system based on surface temperature diffusion[J]. Patterns, 2022, 3(2):100432.
[17] BERNARDI D, PAWLIKOWSKI E, NEWMAN J. A general energy balance for battery systems[J]. Journal of the Electrochemical Society, 1985, 132(1):5.
[18] GU W B, WANG C Y. Thermal-electrochemical modeling of battery systems[J]. Journal of The Electrochemical Society, 2000, 147(8):2910-2922.
[19] HOCHREITER S, SCHMIDHUBER J. Long short-term memory[J]. Neural Computation, 1997, 9(8):1735-1780.
[20] SAK H, SENIOR A W, BEAUFAYS F. Long short-term memory recurrent neural network architectures for large scale acoustic modeling[C]//Interspeech. 2014:338-342.
[21] TOMASZEWSKA A, CHU Z, FENG X, et al. Lithium-ion battery fast charging:A review[J]. eTransportation, 2019, 1:100011.
[22] 钱健. 快速充电——马斯三定律[J]. 蓄电池, 1979, 2:20-26. QIAN Jian, Fast charging-Mas's three laws[J]. Chinese Labat Man, 1979, 2:20-26.

模型与数据融合的大尺寸快充锂电池分布式温度估计

Estimation of Distributed Temperature of Large-format Fast-charging Lithium-ion Batteries Based on a Model-data Fusion Method

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	吴吉展, 魏沛堂, 吴少杰, 刘怀举, 朱才朝. 航空齿轮钢滚动接触疲劳性能预测与表面完整性优化[J]. 机械工程学报, 2024, 60(8): 81-93.
[2]	朱海华, 王健杰, 李霏, 刘长春, 蔡祺祥. 基于特征选择和SSA-LSTM的车间订单剩余完工时间预测[J]. 机械工程学报, 2024, 60(20): 388-402.
[3]	吕志军, 褚铭, 周亚勤, 肖雷, 李宏亮. 物理模拟与数据驱动混合的Z型立柱片剪切刚度认知预测方法[J]. 机械工程学报, 2024, 60(2): 50-61.
[4]	谭志朴, 秦国华, 娄维达, 吴竹溪. 基于伯努利分布与混合驱动模型的铣削稳定性高精判断方法[J]. 机械工程学报, 2024, 60(11): 318-331.
[5]	邵海东, 肖一鸣, 颜深. 仿真数据驱动的改进无监督域适应轴承故障诊断[J]. 机械工程学报, 2023, 59(3): 76-85.
[6]	谷平维, 段彬, 康永哲, 张承慧, 杜春水. 基于随机充电数据的锂离子电池容量在线估计[J]. 机械工程学报, 2023, 59(22): 100-110.
[7]	李敏, 陈涛涛, 鲁森, 杨开明, 朱煜, 胡楚雄. 光刻机超精密运动台数据驱动MIMO定结构前馈控制[J]. 机械工程学报, 2023, 59(21): 99-109.
[8]	胡炳涛, 冯毅雄, 刘继红, 郭伟, 谭建荣. 面向“互联网+”定制产品的智能适应性设计研究[J]. 机械工程学报, 2023, 59(12): 109-125.
[9]	杨淞元, 田勇, 田劲东. 基于iCEEMDAN和迁移学习的锂离子电池SOH估计^*[J]. 电气工程学报, 2022, 17(4): 2-10.
[10]	徐彬翔, 郑林锋, 黄乙恒, 肖志能, 王新月. 基于改进最小二乘支持向量机的锂离子电池健康状态快速估计方法^*[J]. 电气工程学报, 2022, 17(4): 11-19.
[11]	管寅昕, 杨吉祥, 丁汉. 考虑控制电信号中间量的机床运动控制误差数据驱动建模方法[J]. 机械工程学报, 2022, 58(23): 178-187.
[12]	王闰南, 谢帆, 张波. 基于神经网络方法的峰值电流控制Boost变换器数据驱动建模^*[J]. 电气工程学报, 2022, 17(2): 142-150.
[13]	易茜, 刘益君, 卓俊康, 李聪波, 易树平. BRBP-MOSOA融合数据驱动的热处理工艺低碳优化方法[J]. 机械工程学报, 2022, 58(16): 370-383.
[14]	刘源, 魏世忠. 数据驱动的钢铁耐磨材料性能预测研究综述[J]. 机械工程学报, 2022, 58(10): 31-50.
[15]	刘茜, 程靖, 梁建勋. 混合碰撞建模方法及其试验验证[J]. 机械工程学报, 2022, 58(1): 116-123.