• CN：11-2187/TH
  • ISSN：0577-6686
机械工程学报

机械工程学报 ›› 2017, Vol. 53 ›› Issue (7): 62-68.doi: 10.3901/JME.2017.07.062

• 机构学及机器人 • 上一篇    下一篇

扫码分享

500 m口径射电望远镜索网与面板单元自适应
连接机构设计分析*

李庆伟1,2, 姜鹏1,2, 南仁东1,2   

  1. 1. 中国科学院国家天文台 北京 100012；
    2. 中国射电天文重点实验室 北京 100012；
  • 出版日期:2017-04-05 发布日期:2017-04-05
  • 作者简介:

    李庆伟，男，1980年出生。主要从事大型射电望远镜的研制。

    E-mail：qwli@nao.cas.cn

    姜鹏(通信作者)，男，1978年出生，研究员。主要从事工程力学、大型射电望远镜的研制等方向的研究。

    E-mail：pjiang@bao.ac.cn

  • 基金资助:
    * 国家自然科学青年基金(11303059)、 国家自然科学基金面上(11673039)、中国科学院关键技术人才基金和中国科学院青年创新促进会人才基金资助项目; 20160608收到初稿，20170103收到修改稿;

Design and Analysis of the Adaptive Connecting Mechanism between the Cable-net and Panel of Five-hundred-meter Aperture Spherical Radio Telescope

LI Qingwei1,2, JIANG Peng1,2, NAN Rendong1,2   

  1. 1. National Astronomical Observatories， Chinese Academy of Sciences， Beijing 100012;
    2. Key Laboratory of Radio Astronomy， Beijing 100012
  • Online:2017-04-05 Published:2017-04-05

PDF

296

摘要：

500 m口径射电望远镜(Five-hundred-meter aperture spherical radio telescope， FAST)采用柔性索网+刚性面板的设计方案，变位观测过程中索网呈柔性，而面板单元则呈刚性，这就需要在面板和索网节点之间设计自适应连接机构，以避免面板在单元变位过程中受附加应力的影响。因应FAST的技术需求，主要完成了以下工作：进行自适应连接机构的自由度设计及机械设计，建立包含连接机构的FAST反射面整体有限元模型，并通过与理论分析结果的对比，验证了有限元模型的准确性;应用建立的有限元模型，计算索网在变位过程中自适应连接机构的运动范围，为FAST工程提供了必要的设计参数。

关键词: 索网结构, 有限元, 主动反射面, 自适应机构, 500 m口径射电望远镜

Abstract:

The reflector system of the five-hundred-meter aperture spherical radio telescope (FAST) is designed as rigid panels supported by a flexible cable-net structure. Shape-changing operation in process of observation will lead to relative displacements between the adjacent nodes of the cable-net. Meanwhile, three nodes on a rigid panel are fixed relatively. Thus, adaptive connecting mechanisms between panels and the cable-net are certainly needed to avoid the influence of additional stress during shape-changing operation. The present work focuses on the following aspects according to the technical requirements of FAST. The degrees of freedom and the structure of the adaptive connecting mechanisms are designed, and the finite element model of the reflector system with the adaptive connecting mechanisms is established. Then the theoretical algorithm is applied to verify the results calculated by the finite element analysis. The finite element analysis is carried out to calculate the scope of motion of adaptive connecting mechanisms during the shape-changing of the cable-net, thus providing input parameters for the design of adaptive connecting mechanisms.

Key words: active reflector, adaptive connecting mechanism, cable-net structure, finite element, five-hundred-meter aperture spherical radio telescope

版权所有 © 2019 《机械工程学报》编辑部 | 京ICP备05055788号-30