• CN：11-2187/TH
  • ISSN：0577-6686
机械工程学报

机械工程学报 ›› 2016, Vol. 52 ›› Issue (20): 30-37.doi: 10.3901/JME.2016.20.030

• 材料科学与工程 • 上一篇    下一篇

扫码分享

Q345D低合金钢在海洋潮差区的腐蚀规律#br# 及电化学行为研究*

吴俊升1,2, 林超1, 彭冬冬1, 李晓刚1,2,3   

  1. 1. 北京科技大学腐蚀与防护中心 北京 100083；
    2. 北京科技大学腐蚀与防护教育部重点实验室 北京 100083；
    3. 中国科学院宁波材料技术与工程研究所 宁波 315201
  • 出版日期:2016-10-20 发布日期:2016-10-20
  • 作者简介:吴俊升(通信作者)，男，1976年出生，博士，副教授。主要研究方向为材料腐蚀与防护。E-mail：wujs@ustb.edu.cn
  • 基金资助:
    * 国家自然科学基金(51271031)、国家重点基础研究发展计划(973计划，2014CB643300)和国家科技基础条件平台(2005DKA10400)资助项目; 20151022收到初稿，20160801收到修改稿;

Electrochemical Investigation and Corrosion Behavior of Low Alloy Steel Q345D in Marine Tidal Zone

WU Junsheng1,2, LIN Chao1, PENG Dongdong1, LI Xiaogang1,2,3   

  1. 1. Corrosion and Protection Center， University of Science and Technology Beijing， Beijing 100083
    , 2. Key Laboratory for Corrosion and Protection of Ministry of Education， University of Science and Technology Beijing， Beijing 100083
    , 3. Ningbo Institute of Material Technology & Engineering， Chinese Academy of Sciences， Ningbo 315201
  • Online:2016-10-20 Published:2016-10-20

PDF

399

摘要：

通过在青岛海域2年实海挂片暴露试验研究Q345D低合金钢和对比材料Q235B普碳钢在潮差区的腐蚀行为。试验结果表明，Q345D钢在实海潮差区1年和2年周期的平均腐蚀速率都小于Q235B钢，且两种钢锈层组成和结构基本类似，但Q345D钢表面锈层较厚，且更致密均匀。通过室内模拟海水周浸腐蚀试验研究两种钢的初期腐蚀行为，通过腐蚀数据的回归拟合分析得出，在腐蚀起始阶段，Q345D钢与Q235B钢的腐蚀倾向差别不大，但随着周浸时间的延长，腐蚀速率逐渐降低，且Q345D钢表现出比Q235B更好的耐全面腐蚀性能。宏观电化学阻抗谱和微区阻抗谱测试结果也证实，Q345D低合金钢形成的腐蚀产物膜层具有比Q235B钢更高的膜层电阻，且能够在更短时间内形成稳定的腐蚀产物膜层。

关键词: 潮差区, 电化学, 腐蚀, 周浸腐蚀试验, Q345D低合金钢

Abstract:

The corrosion behavior of low alloy steel Q345D and carbon steel Q235B in marine tidal zone is investigated by outdoor corrosion test for 2 years in Qingdao sea area located on the east coast of China. The depth losses of steels exposed for 1 year and 2 year show that the average corrosion rates of Q345D are lower than that of the carbon steel Q235B in marine tidal zone, and the structure observation and composition of rust layers for two kinds of steels are close. Compared with Q235B, the corrosion products formed on Q345D is more compact and uniform. Moreover, the early corrosion behavior of Q345D and Q235B is studied by laboratory cyclic-immersion corrosion test for a period of 30 days in artificial seawater, and the regression analysis is conducted to study the process of corrosion. The results show that the corrosion tendency of Q345D is similar to that of Q235B in the initial stage, because the electrolyte can contact the substrate directly, the corrosion rates of two kinds of steels are higher. As the time is going on, the Q345D steel exerts a better resistance to corrosion than the carbon steel Q235B, and the average corrosion rate is reduced obviously. In addition, the results of electrochemical impedance spectroscopic (EIS) and local electrochemical impedance spectroscopic (LEIS) indicate that the resistance of rust layer on Q345D is higher than that on Q235B, furthermore, a stable rust layer could form easily for the Q345D in artificial seawater.

Key words: corrosion, cyclic-immersion corrosion test, electrochemistry, tidal zone, Q345D low alloy steel

版权所有 © 2019 《机械工程学报》编辑部 | 京ICP备05055788号-30