• CN:11-2187/TH
  • ISSN:0577-6686

›› 2014, Vol. 50 ›› Issue (4): 107-112.

• 论文 • 上一篇    下一篇

汽车稳定性多控制工况设计及其切换机制研究

高振海;王竣;郭健   

  1. 吉林大学汽车仿真与控制国家重点实验室
  • 发布日期:2014-02-20

Multi-control States and Switch Conditions Design for Vehicle Electronic Stability Program

GAO Zhenhai;WANG Jun;GUO Jian   

  1. State Key Laboratory of Automotive Simulation and Control, Jilin University
  • Published:2014-02-20

摘要: 从人、车与路闭环系统快速实现驾驶员操纵意图角度出发,在现有汽车稳定性控制系统多采用车辆2自由度参考模型的基础上引入驾驶员施加的转向盘转动角速度参数,更为全面地描述驾驶员转向的急迫程度和车辆转向运动趋势,进而考虑当前时刻及前一状态车辆不足或过度转向趋势,针对车辆不足转向、过度转向和反向转向等典型行驶工况设计出16种单轮优选控制工况和16种多轮优选控制工况及其切换机制,实施冬夏季的实车场地试验测试。场地试验表明,提出的多控制工况及切换机制在保障车辆稳定性的前提下,提高了汽车稳定性控制系统对驾驶员行驶意图改变时车辆的快速响应性能。

关键词: 稳定性控制;控制工况切换机制;驾驶员行驶意图;多轮制动控制

Abstract: From the point of view of rapid response to driver’s intention in driver-vehicle-road closed loop system, the rate of steering wheel angle is introduced into vehicle dynamics model of two degree of freedom which is most used to comprehensively represent the intensity of driver steer maneuver and is adopted as the reference model by almost all electronic stability program(ESP). Meanwhile, considering the vehicle current state and previous states of the tendency of understeering or oversteering, an improved ESP is established and consists of 32 control states totally including sixteen control states in which one single road wheel is braked and the other sixteen control states in which multi-wheel is braked actively. Finally the field experiments of ESP in summer and winter have been implemented and the results show that the new ESP algorithm can obviously improve response performance for the change of driver maneuver and enhance vehicle stability performance effectively.

Key words: electronic stability control;control states and switch conditions;driver’s intention;multi-wheel active brake

中图分类号: