• CN:11-2187/TH
  • ISSN:0577-6686

›› 2007, Vol. 43 ›› Issue (1): 144-146.

• 论文 • 上一篇    下一篇

滚动轴承振动的周期平稳性分析及故障诊断

贾民平;杨建文   

  1. 东南大学机械工程学院
  • 发布日期:2007-01-15

CYCLIC-STATIONARY ANALYSIS OF BEARING VIBRATION AND FAULT DIAGNOSIS

JIA Minping;YANG Jianwen   

  1. School of Mechanical Engineering, Southeast University
  • Published:2007-01-15

摘要: 分析滚动轴承出现故障后振动信号的特征,在给出滚动轴承冲击信号数学模型的基础上,指出滚动轴承故障为典型的非平稳信号,具有很宽的频带,用幅值谱难以获得故障特征。利用滚动轴承回转工作的特点,推导滚动轴承故障信号的循环平稳性,指出该故障信号为几乎周期平稳信号。简单介绍二阶循环统计量的解调特性,提出先对滚动轴承故障信号进行带通滤波,然后利用二阶循环统计量解调来进行故障特征识别。对工业现场故障数据的分析表明所提出方法的有效性。

关键词: 二阶循环统计量, 故障诊断, 滚动轴承, 滤波, 周期平稳

Abstract: The vibration feature of bearing with fault is analyzed, and on the condition of the mathematical model with impact signal of bearing, the signal is pointed out to be non-stationary and have the wide frequency band, so the fault feature can’t be gotten with the amplitude spectrum. Referencing the property of rotating movement of bearing, the cyclostationarity of vibration signal is deduced, and the signal is almost cyclostationary. The demodulation function o the second-order cyclic statistics is introduced, the method of using filtering and the second-order cyclic statistics to identify the fault feature is derived. The vibration of bearing with fault is analyzed and showed the method proposed in the paper is effective.

Key words: Cyclostationary, Fault diagnosis, Filtering, Rolling bearing, Second-order cyclic statistics

中图分类号: