• CN:11-2187/TH
  • ISSN:0577-6686

›› 2005, Vol. 41 ›› Issue (3): 102-106.

• 论文 • 上一篇    下一篇

高温带钢的局部宽度内压屈曲及后屈曲分析

张清东;刘赟赟;周晓敏;邹玉贤;黄夏兰;彭俊   

  1. 北京科技大学机械工程学院;宝钢股份公司冷轧厂
  • 发布日期:2005-03-15

PART WIDTH COMPRESSIVE BUCKLING AND POSTBUCKLING ANALYSIS OF STEEL STRIP UNDER HIGH TEMPERATURE

Zhang Qingdong;Liu Yunyun;Zhou Xiaomin;Zou Yuxian;Huang Xialan;PengJun   

  1. Mechanical Engineering School, University of Science and Technology Beijing Cold Rolling Department, Baoshan Iron & Steel Co.Ltd
  • Published:2005-03-15

摘要: 根据工业生产中最主要8种带钢浪形(即板形缺陷)的浪形函数和其对应的带钢纵向不均匀伸长率的横向分布,抽象出产生此浪形的局部内压屈曲过程的位移函数和端边界外力条件,然后分别运用弹性薄板小位移理论和大位移理论建立了屈曲和后屈曲变形模型,并使用能量法进行了求解。在过去对常温态带钢此类问题研究的基础上,对高温态带钢的此类屈曲变形进行理论分析和数值计算,获得了各种工况下的屈曲条件和瓢曲生成路径。

关键词: 板形缺陷, 带钢, 高温, 局部宽度, 屈曲/后屈曲

Abstract: According to the waviness function and the corresponding longitudinal fiber's non-homogeneous elongation of the eight main strip shape (I.e. flatness defects) in industry production, the displacement function and boundary condition of the inner stress for the buckling process which produces the waviness is abstracted. Furthermore, buckling and postbuckling models are established by use of elastic thin plate theory and the principle of energy, and numerical examples are analyzed and calculated. On the basis of the research of the strip buckling and postbuckling at normal temperature, the strip buckling at high temperature is studied , and the buckling criteria and the deforming route at variable conditions is obtained.

Key words: Buckling/postbuckling, Flatness defect, High temperature, Part width, Strip

中图分类号: