• CN:11-2187/TH
  • ISSN:0577-6686

›› 2003, Vol. 39 ›› Issue (8): 135-137.

• 论文 • 上一篇    下一篇

计算冷轧带钢工作辊接触压扁的Hitchcock公式的有限元修正

朱光明;杜凤山;孙登月;周坚刚;朱泉封   

  1. 燕山大学轧机研究所;宝钢自动化所
  • 发布日期:2003-08-15

FEM REVISE OF HITCHCOCK EQUATION OF CALCULATING WORKING ROLL’S CONTACT FLATTENING IN COLD STRIP STEEL ROLLING

Zhu Guangming;Du Fengshan;Sun Dengyue;Zhou Jiangang;Zhu Quanfeng   

  1. Yanshan University Automatic Institute of Baosteel
  • Published:2003-08-15

摘要: 采用弹塑性大变形有限元法对板带冷轧过程中工作辊的接触压扁进行模拟,利用数值手段对轧辊弹性压扁后的形状曲线进行拟合,并对计算轧辊压扁半径的Hitchcock公式进行了修正,大幅提高了轧制力的控制模型精度。

关键词: 大变形, 弹塑性, 接触压扁, 有限元法, 轧制力

Abstract: By using elastic-plastic and large deformation FEM, the contact flattening of the working rolls in cold strip steel rolling is simulated. And the shape curves after elastic flattening of the working rolls using numeric method is fitted, then the Hitchcock equation of calculating the roll flattening radius which can enhance the accuracy of the control model of rolling force calculating in a wide range is revised.

Key words: Contact flattening, Elastic-plastic, FEM, Large deformation, Rolling force

中图分类号: