• CN:11-2187/TH
  • ISSN:0577-6686

›› 1958, Vol. 6 ›› Issue (2): 133-138.

• 论文 • 上一篇    

扫码分享

曲柄连杆机构运动误差的调整

曹惟庆   

  1. 西安交通大学
  • 发布日期:1958-03-01

THE ADJUSTMENT OF THE KINEMATIC ERRORS OF CRANK-SLIDE MECHANISM

TSAO WEICHING   

  1. Chiao-tong University,Sian
  • Published:1958-03-01

关键词: 颤振, 集成式电子液压制动系统, 液压力控制

Abstract: Using the result; obtained by the author in an earlier paper that the acceleration error of the output link of crank-slide mechanism may ho eliminated if the length-errors of bars satisfy the following equations: (1) due to upper dead center η=Δl2/(λ2Δl1)-2/-1;(2) due to lower dead centerη=Δl2/(λ2Δl1)-2/λ+1, hereη=Δj/(Δl2 a12) is called acceleration error factor, λ is the ratio of length of crank and connecting rod. The angular acceleration error of connecting rod due to both dead centers is eliminated if the following relationship is satisfied.

Key words: chatter, hydraulic pressure control, integrated-electro-hydraulic brake system