• CN:11-2187/TH
  • ISSN:0577-6686

机械工程学报 ›› 2026, Vol. 62 ›› Issue (17): 322-333.doi: 10.3901/JME.260737

• 机器人及机构学 • 上一篇    

扫码分享

仿壁虎趾垫多级可控粘附结构设计与优化

刘彦伟1, 洪慧程1, 胡重阳2, 王浩1, 李淑娟1   

  1. 1. 西安理工大学教育部数控机床及机械制造装备集成重点实验室 西安 710048;
    2. 陕西科技大学电气与控制工程学院 西安 710021
  • 收稿日期:2026-02-04 修回日期:2026-06-22 发布日期:2026-11-20
  • 作者简介:刘彦伟(通信作者),男,1987年出生,博士,副教授,硕士研究生导师。主要研究方向为仿生机器人、微型飞行器技术。E-mail:liuyw@xaut.edu.cn;洪慧程,男,2002年出生,硕士研究生。主要研究方向为仿生粘附与仿生手爪。E-mail:2240221280@stu.xaut.edu.cn
  • 基金资助:
    国家自然科学基金(62403295,51805431)和陕西省自然科学基础研究计划(2026JC-YBMS 0427)资助项目。

Design and Optimization of a Gecko Toe Pad-inspired Hierarchical Controllable Adhesive Structure

LIU Yanwei1, HONG Huicheng1, HU Chongyang2, WANG Hao1, LI Shujuan1   

  1. 1. Key Lab. of NC Machine Tools and Integrated Manufacturing Equipment of Ministry of Education, Xi'an University of Technology, Xi'an 710048;
    2. School of Electrical and Control Engineering, Shaanxi University of Science & Technology, Xi'an 710021
  • Received:2026-02-04 Revised:2026-06-22 Published:2026-11-20

摘要: 可控粘附技术是实现爬壁机器人、精密抓持等应用的关键,其核心挑战在于兼顾高粘附强度与快速脱附能力。受壁虎趾垫“皮瓣-刚毛”多级结构及其粘附调控机制启发,提出一种由毫米级靴形基体与微米级蘑菇状粘附阵列复合的仿生多级粘附结构。采用单因素实验与Box-Behnken响应曲面法,系统研究了靴形基体的根部宽度、顶面倾角及顶面长度对粘附性能的影响规律及交互作用,并据此优化了结构参数。实验表明,优化后的粘附结构在正向剪切2 mm后法向粘附力达4.5 N;反向剪切4 mm后,法向粘附力迅速降至约0.3 N(约为峰值的7%),实现了“强粘附-易脱附”的可逆调控。进一步,将优化结构集成为对抓式仿生粘附手爪,实现了对不同光滑表面的稳定抓持,并能与机械臂协同完成对硅片等易碎器件的无损搬运,验证了其在实际操作任务中的应用可行性。

关键词: 壁虎趾垫, 可控粘附, 靴形基体, 多级结构, 粘附手爪

Abstract: Controllable adhesion technology is essential for applications such as wall-climbing robots and precision grasping, with its core challenge lying in achieving a balance between high adhesion strength and rapid detachment capability. Inspired by the hierarchical lamella-seta structure of the gecko toe pad and its adhesion regulation mechanism, a bio-inspired hierarchical adhesive structure composed of a millimeter-scale boot-shaped substrate integrated with micrometer-scale mushroom-shaped adhesive array is proposed. Single-factor experiments and the Box-Behnken response surface methodology are employed to systematically investigate the effects and interactions of three key geometric parameters of the boot-shaped substrate—root width, top inclination angle, and top length—on adhesion performance, followed by structural parameter optimization. Experimental results show that the optimized adhesive structure achieves a normal adhesion force of 4.5 N after a forward shear displacement of 2 mm. Conversely, after a reverse shear displacement of 4 mm, the normal adhesion force rapidly decreases to approximately 0.3 N (about 7% of the peak value), demonstrating reversible switching between strong adhesion and easy detachment. Furthermore, the optimized structure is integrated into a bio-inspired adhesive gripper which achieved stable grasping on various smooth surfaces and successfully performed non-destructive pick-and-place operations on fragile components like silicon wafers in collaboration with a robotic arm, verifying its potential for practical manipulation tasks.

Key words: gecko toe pad, controllable adhesion, boot-shaped substrate, hierarchical structure, adhesive gripper

中图分类号: