• CN:11-2187/TH
  • ISSN:0577-6686

机械工程学报 ›› 2026, Vol. 62 ›› Issue (18): 330-338.doi: 10.3901/JME.260638

• 材料科学与工程 • 上一篇    

扫码分享

交叉累积叠轧Cu/Ag复合材料真空载流摩擦磨损性能研究

骆孝武1,2,3, 李璞1,2,3,4, 周青华1,2,3, 张强5, 刘艳敏5, 邓超文6, 杨林6   

  1. 1. 四川大学空天科学与工程学院 成都 610065;
    2. 空间先进机构与智能飞行器教育部重点实验室 成都 610065;
    3. 机器人卫星四川省国防科技重点实验室 成都 610065;
    4. 重庆大学高端装备机械传动全国重点实验室 重庆 400044;
    5. 北京控制工程研究所 北京 100190;
    6. 成都大学机械工程学院 成都 610106
  • 收稿日期:2025-10-31 修回日期:2026-06-29 发布日期:2026-11-20
  • 作者简介:骆孝武,男,1997年出生,博士研究生。主要研究方向为空间导电滑环载流摩擦磨损性能研究。E-mail:15779774332@163.com;李璞(通信作者),男,1989年出生,博士,副教授,硕士研究生导师。主要研究方向为空间异种材料先进轧制成形技术及多物理场耦合理论。E-mail:pli3563@163.com;周青华,男,1986年出生,博士,教授,博士研究生导师。主要研究方向为空间异种材料界面摩擦学理论。E-mail:qh.zhou@foxmail.com
  • 基金资助:
    国家自然科学基金(52205192,52275205),四川省自然科学基金(2026NSFSC0292),五O二所空间驱动与操控机构专业实验室和空间智能控制技术全国重点实验室开放基金(BICE-SDMM-2025-02)和高端装备机械传动全国重点实验室开放基金(SKLMT-MSKFKT-202528)资助项目。

Study on Vacuum Current-Carrying Friction and Wear Properties of Cross-Accumulative Roll-Bonded Cu/Ag Composite Materials

LUO Xiaowu1,2,3, LI Pu1,2,3,4, ZHOU Qinghua1,2,3, ZHANG Qiang5, LIU Yanmin5, DENG Chaowen6, YANG Lin6   

  1. 1. School of Aeronautics and Astronautics, Sichuan University, Chengdu 610065;
    2. Key Laboratory of Advanced Spatial Mechanism and Intelligent Spacecraft(Ministry of Education), Chengdu 610065;
    3. Robotic Satellite Key Laboratory of Sichuan Province, Sichuan University, Chengdu 610065;
    4. State Key Laboratory of Mechanical Transmission for Advanced Equipment, Chongqing University, Chongqing 400044;
    5. Beijing Institute of Control Engineering, Beijing 100190;
    6. School of Mechanical Engineering, Chengdu University, Chengdu 610106
  • Received:2025-10-31 Revised:2026-06-29 Published:2026-11-20

摘要: 空间超精密导电滑环在服役过程中常常面临着多种复杂工况的共同作用:真空环境导致传统润滑机制失效;电-热-力多物理场耦合引发材料性能的协同退化;微振动与冲击易诱发电弧放电,从而加剧界面磨损;同时,磨屑的迁移与堆积又容易引发沿面放电和电击穿等失效现象。这些因素相互耦合、相互强化,严重制约了空间滑动汇流环的服役性能与运行稳定性。为满足空间导电滑环长寿命、高可靠性的电能传输需求,研究采用交叉累积叠轧技术(Cross-accumulative roll bonding,CARB)制备Cu/Ag多层复合材料,系统探讨了其界面结合特性及在真空载流工况下的摩擦磨损性能,实现了硬度、载流摩擦磨损性能与导电性之间的协同优化。微区力学性能与导电性测试结果表明,CARB工艺显著提升了材料的力学性能和导电性能,其中,交叉叠轧形成的Cu/Ag多层复合材料硬度达102.7 HV,电导率提升至107.4% IACS,强化效应主要归因于优异的界面结合质量以及位错强化和细晶强化。真空载流摩擦磨损试验进一步表明,Cu/Ag多层复合材料具有最小的电噪声和较低的磨损率,综合性能表现最为优异。研究证实了CARB工艺下层状结构设计在提升材料载流性能方面的显著优势,为高性能空间导电滑环用Cu/Ag复合材料的开发提供了新的思路和理论支撑。

关键词: 交叉累积叠轧, Cu/Ag复合材料, 微区力学性能, 空间导电滑环, 真空载流摩擦磨损

Abstract: Space ultra-precision conductive slip rings are often subjected to the combined action of various complex working conditions during service:the vacuum environment leads to the failure of traditional lubrication mechanisms; the electro-thermal-mechanical multi-physics field coupling induces the synergistic degradation of material properties; micro-vibrations and shocks are prone to triggering arc discharge, thereby exacerbating interfacial wear; meanwhile, the migration and accumulation of wear debris are likely to cause surface discharge, electrical breakdown and other failure phenomena. These factors are mutually coupled and reinforced, which seriously restricts the service performance and operational stability of space sliding collector rings. To meet the long-life and high-reliability power transmission requirements of space conductive slip rings, Cu/Ag multilayer composites were prepared by cross-accumulative roll bonding(CARB) technology in this study. The interfacial bonding characteristics and friction-wear properties under vacuum current-carrying conditions were systematically investigated, realizing the synergistic optimization of hardness, current-carrying friction-wear properties and electrical conductivity. The results of micro-region mechanical property and electrical conductivity tests show that the CARB process significantly improves the mechanical and electrical properties of the materials. Among them, the hardness of the Cu/Ag multilayer composites formed by cross-roll bonding reaches 102.7 HV, and the electrical conductivity is increased to 107.4% IACS. The strengthening effect is mainly attributed to the excellent interfacial bonding quality as well as dislocation strengthening and grain refinement strengthening. Further vacuum current-carrying friction-wear tests indicate that the Cu/Ag multilayer composites exhibit the minimum electrical noise and low wear rate, achieving the most outstanding comprehensive performance. This study confirms the significant advantages of layered structure design based on the CARB process in improving the current-carrying performance of materials, providing new ideas and theoretical support for the development of high-performance Cu/Ag composites for space conductive slip rings.

Key words: cross-accumulation and rolling, Cu/Ag composites, micro-region mechanical property, space conductive slip ring, vacuum current-carrying friction-wear

中图分类号: