基于改进力密度法和非线性有限元法的索-膜-桁架天线形态优化设计

doi:10.3901/JME.2023.09.252

机械工程学报 ›› 2023, Vol. 59 ›› Issue (9): 252-262.doi: 10.3901/JME.2023.09.252

扫码分享

基于改进力密度法和非线性有限元法的索-膜-桁架天线形态优化设计

谷永振¹, 段宝岩², 杜敬利², 史伟杰¹, 张永涛¹, 武路鹏¹, 冯树飞³

1. 青岛科技大学大学机械工程及自动化系青岛 266061;
2. 西安电子科技大学电子装备结构设计教育部重点实验室西安 710071;
3. 东莞理工学院机械工程学院东莞 523808

收稿日期:2022-06-04 修回日期:2022-11-22 出版日期:2023-05-05 发布日期:2023-07-19
通讯作者: 谷永振(通信作者),男,1991年出生,博士。主要研究方向为星载薄膜天线结构设计与多场耦合分析。E-mail:yzgu@qust.edu.cn E-mail:yzgu@qust.edu.cn
基金资助:
国家自然科学基金(52005277)、广东省基础与应用基础研究基金(2020A1515111043)和青岛科技大学科研启动基金(12030430010878)资助项目。

Shape-state Optimal Design of Cable-membrane-truss Antenna Based on Improved Force Density Method and Nonlinear Finite Element Method

GU Yongzhen¹, DUAN Baoyan², DU Jingli², SHI Weijie¹, ZHANG Yongtao¹, WU Lupeng¹, FENG Shufei³

1. Department of Mechanical Engineering and Automation, Qingdao University of Science and Technology, Qingdao 266061;
2. Key Laboratory of Electronic Equipment Structure Design of Ministry of Education, Xidian University, Xi'an 710071;
3. Dongguan University of Technology, Dongguan 523808

Received:2022-06-04 Revised:2022-11-22 Online:2023-05-05 Published:2023-07-19

摘要/Abstract

摘要： 索-膜组合结构预张力会通过边界索力作用到支撑桁架上导致桁架变形,桁架变形又会改变索-膜组合结构的边界形状和预张力分布,这是索-膜-桁架之间的力-形耦合问题。针对索-膜-桁架天线中普遍存在的这种力-形耦合问题,提出了基于改进力密度法和非线性有限元法的形态优化设计方法进行解决。首先推导了索-膜组合结构的改进力密度平衡方程,利用力密度迭代方法确定边界固定时的索-膜组合结构初始形态,作为形态优化的初始值。然后推导了索-膜-桁架组合结构的非线性有限元平衡方程,并以索和薄膜预张力为设计变量、薄膜反射面的最佳拟合形面精度为优化目标、索-膜组合结构不松弛或褶皱为约束条件建立形态优化模型。最后通过对某口径5米索-膜-桁架天线和某口径20米的偏置索-膜-桁架天线进行形态优化设计仿真,验证了提出方法的有效性。设计完成的某口径5米的索-膜-桁架天线,实物模型测量取得了预期结果。

关键词: 索-膜-桁架结构, 反射面天线, 桁架变形, 形态优化设计

Abstract: The pre-tension of the cable-membrane composite structure will act on the supporting truss through the boundary cable force to cause the truss deformation, and the deformation of the truss will change the boundary shape and pre-tension distribution of the cable-membrane composite structure. This is the force-shape coupling problem of the cable-membrane-truss structure. Aiming at the force-shape coupling problem that is common in cable-membrane-truss antennas, a shape-state optimal design method based on improved force density method and nonlinear finite element method is proposed. First, the improved force density balance equation of the cable-membrane composite structure is derived, and the initial shape of the cable-membrane composite structure when the boundary is fixed is determined by the force density iteration method as the initial value of the shape-state optimal design. Then the nonlinear finite element balance equation of the cable-membrane-truss composite structure is derived, and the pretension of the cable and the membrane is used as the design variable, the best fitting shape accuracy of the membrane reflective surface is the optimization goal, and the cable-membrane composite structure is not slacked or wrinkled are constraints to establish the shape-state optimal design model. Finally, the effectiveness of the proposed method is verified by shape-state optimal design simulation of a 5m cable-membrane-truss antenna and a 20m offset cable-membrane-truss antenna. The design of a cable-membrane-truss antenna with a diameter of 5 meters has been measured by a physical model and the expected results have been obtained.

Key words: cable-membrane-truss structure, reflector antenna, truss deformation, shape-state optimal design

中图分类号:

V443

谷永振, 段宝岩, 杜敬利, 史伟杰, 张永涛, 武路鹏, 冯树飞. 基于改进力密度法和非线性有限元法的索-膜-桁架天线形态优化设计[J]. 机械工程学报, 2023, 59(9): 252-262.

GU Yongzhen, DUAN Baoyan, DU Jingli, SHI Weijie, ZHANG Yongtao, WU Lupeng, FENG Shufei. Shape-state Optimal Design of Cable-membrane-truss Antenna Based on Improved Force Density Method and Nonlinear Finite Element Method[J]. Journal of Mechanical Engineering, 2023, 59(9): 252-262.

参考文献

[1] 刘荣强,史创,郭宏伟,等. 空间可展开天线机构研究与展望[J]. 机械工程学报,2020,56(5):1-12. LIU Rongqiang,SHI Chuang,GUO Hongwei,et al. Review of space deployable antenna mechanisms[J]. Journal of Mechanical Engineering,2020,56(5):1-12.
[2] 段宝岩. 大型空间可展开天线的研究现状与发展趋势[J]. 电子机械工程,2017,33(1):1-14. DUAN Baoyan. The state-of-the-art and development trend of large space-borne deployable antenna[J]. Electro-Mechanical Engineering,,2017,33(1):1-14.
[3] BARNES M R. Form finding and analysis of tension structures by dynamic relaxation[J]. Space Structures,1999,14(2):89-104.
[4] KHATIBINIA M,HOSSEINAEI S,SARAFRAZI S R. Efficiency of dynamic relaxation methods in form-finding of tensile membrane structures[J]. SN Applied Sciences,2019,1(11).
[5] 项平,丁潇,吴明儿,等. 大型平面薄膜天线找形及张拉成形数值分析[J]. 机械工程学报,2020,56(5):141-149. XIANG Ping,DING Xiao,WU Minger,et al. Numerical analysis of form-finding and tension forming of large planar membrane antenna[J]. Journal of Mechanical Engineering,2020,56(5):141-149.
[6] DINH T D,REZAEI A,PUNURAI W,et al. A shape optimization approach to integrated design and nonlinear analysis of tensioned fabric membrane structures with boundary cables[J]. International Journal of Solids and Structures,2016,83:114-125.
[7] 杨癸庚,杨东武,杜敬利,等. 一种基于力密度的网状可展开天线索网结构初始形态设计方法[J]. 机械工程学报,2016,52(11):34-41. YANG Guigeng,YANG Dongwu,DU Jingli,et al. Method for deployable mesh antenna cable network structures' form-finding design based on forced ensity. Journal of Mechanical Engineering,2016,52(11):34-41.
[8] TANG Yaqiong,LI Tuanjie. Equivalent-force density method as a form-finding tool for cable-membrane structures[J]. Engineering Structures,2017,151:11-19.
[9] 马亚静,杜敬利,段宝岩,等. 考虑支撑桁架变形的星载索网反射面天线形态设计方法[J]. 机械工程学报,2015,51(17):114-119. MA Yajing,DU Jingli,Duan Baoyan,et al. A method to design the initial equilibrium state of spaceborne cable-net antenna considering the flexibility of supporting trusses[J]. Journal of Mechanical Engineering,2015,40(1):114-119.
[10] TANAKA H,SHIMOZONO N,NATORI M C. A design method for cable network structures considering the flexibility of supporting structures[J]. Transactions of the Japan Society for Aeronautical and Space Sciences,2008,50(170):267-273.
[11] MA X,SONG Y,LI Z,et al. Mesh reflector antennas:form-finding analysis review[C]//54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference,2013.
[12] YANG Dongwu,ZHANG Yiqun,LI Peng,et al. Numerical form-finding method for large mesh reflectors with elastic rim trusses[J]. Acta Astronautica,2018,147:241-250.
[13] YUAN Pengfei,HE Baiyan,ZHANG Lianhong,et al. Pretension design of cable-network antennas considering the deformation of the supporting truss:A double-loop iterative approach[J]. Engineering Structures,2019,186:399-409.
[14] LIU Ruiwei,GUO Hongwei,LIU Rongqiang,et al. Design and form finding of cable net for a large cable-rib tension antenna with flexible deployable structures[J]. Engineering Structures,2019,199:109662.
[15] NIE R,HE B,HODGES D H,et al. Integrated form finding method for mesh reflector antennas considering the flexible truss and hinges[J]. Aerospace Science and Technology,2019,84:926-937.
[16] NIE Rui,HE Baiyan,YAN Shaoze,et al. Optimization design method for mesh reflector antennas considering the truss deformation and thermal effects[J]. Engineering Structures,2020,208:110253.

基于改进力密度法和非线性有限元法的索-膜-桁架天线形态优化设计

Shape-state Optimal Design of Cable-membrane-truss Antenna Based on Improved Force Density Method and Nonlinear Finite Element Method

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 4

编辑推荐

Metrics

本文评价

[1]	冯树飞, 班友, 连培园, 王伟. 大型全可动射电望远镜结构设计进展与挑战[J]. 机械工程学报, 2024, 60(13): 330-344.
[2]	连培园, 朱敏波, 王伟, 杨癸庚. 一种轴对称反射面天线温度场实时预估方法[J]. 机械工程学报, 2015, 51(6): 165-172.
[3]	杨东武;仇原鹰;保宏. 基于Moore-Penrose逆的索网天线预拉力设计方法[J]. , 2012, 48(21): 22-27.
[4]	杨东武;尤国强;保宏. 抛物面索网天线的最佳型面设计方法[J]. , 2011, 47(19): 123-128.