• CN:11-2187/TH
  • ISSN:0577-6686

机械工程学报 ›› 2021, Vol. 57 ›› Issue (13): 102-113.doi: 10.3901/JME.2021.13.102

• 机器人及机构学 • 上一篇    下一篇

扫码分享

基于共形几何代数求解(4SPS+SPR)+(2RPS+SPR)串并联机构位置正解

胡波1,2, 张达1,2, 高俊林1,2, 耿雪雯1,2, 叶妮佳1,2, 姚建涛1,2, 易旺民3   

  1. 1. 燕山大学河北省并联机器人与机电系统实验室 秦皇岛 066004;
    2. 燕山大学先进锻压成形技术与科学教育部重点实验室 秦皇岛 066004;
    3. 北京卫星环境工程研究所 北京 100094
  • 收稿日期:2021-02-01 修回日期:2021-04-26 出版日期:2021-08-31 发布日期:2021-08-31
  • 通讯作者: 叶妮佳(通信作者),女,1986年出生,博士,讲师。主要研究方向为并/混联机构学理论及应用。E-mail:nijiareborn@ysu.edu.cn
  • 作者简介:胡波,男,1982年出生,教授,博士研究生导师。主要研究方向为并联机器人理论。E-mail:hubo@ysu.edu.cn;张达,男,1994年出生,硕士研究生。主要研究方向为并联机器人理论。E-mail:742220998@qq.com;高俊林,男,1993年出生,硕士研究生。主要研究方向为并联机器人理论。E-mail:1394315379@qq.com;耿雪雯,女,1996年出生,硕士研究生。主要研究方向为并联机器人理论。E-mail:1146474693@qq.com;姚建涛,男,1980年出生,教授。主要研究方向为机器人机构理论及多维力感知机构。E-mail:jtyao@ysu.edu.cn;易旺民,男,1979年出生,研究员。主要研究方向为航天装配技术、机器人技术及系统。E-mail:yiwangmin79@hotmail.com
  • 基金资助:
    国家自然科学基金联合基金(U2037202)、河北省中央引导地方科技发展资金项目(206Z7602G)、河北省自然科学基金面上(E2020203027)和河北省教育厅高等学校科技计划青年基金(自然类)(QN2020230)资助项目

CGA-based Approach to Solve the Forward Position Solution of the (4SPS+SPR)+(2RPS+SPR) Serial-parallel Manipulator

HU Bo1,2, ZHANG Da1,2, GAO Junlin1,2, GENG Xuewen1,2, YE Nijia1,2, YAO Jiantao1,2, YI Wangmin3   

  1. 1. Parallel Robot and Mechatronic System Laboratory of Hebei Province, Yanshan University, Qinhuangdao 066004;
    2. Key Laboratory of Advanced Forging & Stamping Technology and Science of Ministry of National Education, Yanshan University, Qinhuangdao 066004;
    3. Beijing Institute of Spacecraft Environment Engineering, Beijing 100094
  • Received:2021-02-01 Revised:2021-04-26 Online:2021-08-31 Published:2021-08-31

摘要: 提出将共形几何代数引入至串并联机构位置正解求解过程,以(4SPS+SPR)+(2RPS+SPR)串并联机构为例,首先分别针对上下层并联机构选择合理的运动学参数,基于共形几何代数中基本几何元素的表示方法,对机构中相应球面、平面等共形几何表达式进行求交或对偶运算,得到上下层并联机构动平台顶点的共形几何表达。再结合机构中尺寸、几何约束和内积运算,建立上下层并联机构正向位置解的一元高次方程,进而获得上下层并联机构动平台相对于基平台的位姿。在此基础上,基于共形几何代数中刚体运动变换表达式,得到串并联机构动平台顶点的共形几何表达,进而获得串并联机构的位置正解。该方法避免了传统方法中复杂的消元运算,且分析过程几何直观性较强,在简化串并联机构位置正解几何建模方面表现出巨大优势。

关键词: 串并联机构, 共形几何代数, 运动学正解

Abstract: Conformal geometric algebra (CGA) is introduced into the forward position solution of the series-parallel mechanism. Taking the (4SPS+SPR)+(2RPS+SPR) serial-parallel mechanism as an example, for each parallel manipulator, through reasonably selecting the kinematic parameters, some basic geometric elements, such as sphere and plane, are constructed based on the specific operation rules of CGA, and the geometric expressions of the vertex position for the moving platform can be obtained by the intersection and duality operations of the basic geometric elements. Then, combined with the dimension, geometric constraints of the mechanism and the inner product operation in CGA, the univariate higher order equation of the forward kinematics for each mechanism can be derived, and then the pose of the moving platform relative to the base for each mechanism can be obtained. Based on this result, combined with the rigid body motion transformation in CGA, the position of the moving platform for the serial-parallel mechanism is obtained. The CGA-based method can avoid the complex elimination operations in the traditional method, and the analysis process is more geometric intuitive, which shows great advantages in simplifying the geometric modeling of the forward solution for serial-parallel mechanism.

Key words: serial-parallel mechanism, conformal geometric algebra, forward kinematics

中图分类号: