超薄微热管的研究现状及发展趋势

doi:10.3901/JME.2017.20.131

机械工程学报 ›› 2017, Vol. 53 ›› Issue (20): 131-144.doi: 10.3901/JME.2017.20.131

• 可再生能源与工程热物理 • 上一篇下一篇

扫码分享

超薄微热管的研究现状及发展趋势

汤勇^1,2, 唐恒^1,2, 万珍平^1,2, 袁伟^1,2, 陆龙生^1,2, 李宗涛^1,2

1. 华南理工大学机械与汽车工程学院广州 510640;
2. 广东省功能结构与器件智能制造工程实验室广州 510640

收稿日期:2016-09-08 修回日期:2017-02-20 出版日期:2017-10-20 发布日期:2017-10-20
通讯作者: 唐恒(通信作者),男,1989年出生,博士研究生.主要研究方向为微制造、微热管制造.E-mail:tanghengxtu@163.com
作者简介:汤勇,男,1962年出生,博士,教授,博士研究生导师.主要研究方向为微制造、表面功能结构制造.E-mail:ytang@scut.edu.cn;万珍平,男,1971年出生,博士,教授,博士研究生导师.主要研究方向为现代加工理论与技术、面向节能与新能源的表面功能结构制造.E-mail:zhpwan@scut.edu.cn;袁伟,男,1983年出生,博士,教授,硕士研究生导师.主要研究方向为节能与新能源绿色制造、微纳功能结构制造.E-mail:mewyuan@scut.edu.cn;陆龙生,男,1981年出生,博士,副教授,硕士研究生导师.主要研究方向为微热管制造、微纳功能结构制造.E-mail:meluls@scut.edu.cn;李宗涛,男,1984年出生,博士,副教授.主要研究方向为先进光电子、表面功能结构制造.E-mail:meztli@scut.edu.cn
基金资助:
国家自然科学基金(51275180，51475172)和广东省自然科学基金创新团队(2014A030312017)资助项目。

Development Status and Perspective Trend of Ultra-thin Micro Heat Pipe

TANG Yong^1,2, TANG Heng^1,2, WAN Zhenping^1,2, YUAN Wei^1,2, LU Longsheng^1,2, LI Zongtao^1,2

1. School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510640;
2. Intelligent Manufacturing Engineering Laboratory of Functional Structure and Device in Guangdong, Guangzhou 510640

Received:2016-09-08 Revised:2017-02-20 Online:2017-10-20 Published:2017-10-20

摘要/Abstract

摘要： 快速增加的系统发热已经成为当代先进微电子芯片系统研发和应用中的一项重大技术挑战。热管以其高导热率、高冷却能力、高稳定性和长寿命等优点在高热流密度元件的散热技术领域得到广泛应用。但是，随着电子产品不断朝着高性能化与轻薄化的方向发展，传统圆柱型微热管或普通压扁型热管已难以应用于紧凑、轻薄型的电子设备散热，体积更小、质量更轻、厚度更薄的超薄微热管已成为目前热管技术的重要发展方向和研究热点。详细介绍了超薄微热管的类型及应用，重点综述了目前国内外关于超薄微热管在成形工艺及吸液芯结构等方面的研究进展情况，分析讨论了其在电子器件散热中的发展所存在的问题，并进行科学预测与展望。

关键词: 超薄微热管, 散热, 吸液芯结构

Abstract: The rapid increase of heat generation level has become a major technical challenge in the development and applications of contemporary advanced microelectronic chip system. As an efficient heat transfer device, micro heat pipes have been widely used for thermal management of electronic devices because of their excellent thermal performance and high reliability. However, with electronic devices becoming highly integrated, lighter, and thinner, traditional micro heat pipes cannot meet the usage requirement. An ultra-thin micro heat pipe has been proposed and has become the research focus of modern heat pipe technology. The types and applications of ultra-thin micro heat pipe are introduced, as well as the research progresses of wick structure and forming process of ultra-thin micro heat pipe are summarized. Furthermore, the problems existed on ultra-thin micro heat pipe technology are pointed out and it is also suggested that more efforts should be made to what in the future.

Key words: heat dissipation, ultra-thin micro heat pipe, wick structure

中图分类号:

TK124

汤勇, 唐恒, 万珍平, 袁伟, 陆龙生, 李宗涛. 超薄微热管的研究现状及发展趋势[J]. 机械工程学报, 2017, 53(20): 131-144.

TANG Yong, TANG Heng, WAN Zhenping, YUAN Wei, LU Longsheng, LI Zongtao. Development Status and Perspective Trend of Ultra-thin Micro Heat Pipe[J]. Journal of Mechanical Engineering, 2017, 53(20): 131-144.

参考文献

[1] CHEN P H,CHANG S W,CHIANG K F,et al. High power electronic component:Review[J]. Recent Patents on Engineering,2008,1(4):174-188.
[2] 王辉,汤勇,余建军. 相变传热微通道技术的研究进展[J]. 机械工程学报,2010,46(24):101-106. WANG Hui,TANG Yong,YU Jianjun. Recent advances of the phase change micro-channel cooling structure[J]. Journal of Mechanical Engineering,2010,46(24):101-106.
[3] LV L C,LI J. Micro flat heat pipes for microelectronics cooling: review[J]. Recent Patents on Mechanical Engineering,2013,6(3):169-184.
[4] GARIMELLA S V. Advances in mesoscale thermal management technologies for microelectronics[J]. Microelectronics Journal,2006,37(11):1165-1185.
[5] MARCINICHEN J B,THOME J R,MICHEL B. Cooling of microprocessors with micro-evaporation:A novel two-phase cooling cycle[J]. International Journal of Refrigeration,2010,33(7):1264-1276.
[6] MARCINICHEN J B,OLIVIER J A,LAMAISON N,et al. Advances in electronics cooling[J]. Heat Transfer Engineering,2013,34(5-6):434-446.
[7] WANG C,LIU Z,ZHANG G,et al. Experimental investigations of flat plate heat pipes with interlaced narrow grooves or channels as capillary structure[J]. Experimental Thermal and Fluid Science,2013,48(7):222-229.
[8] PUTRA N,YANUAR,ISKANDAR F N. Application of nanofluids to a heat pipe liquid-block and the thermoelectric cooling of electronic equipment[J]. Experimental Thermal and Fluid Science,2011,35:1274-1281.
[9] CHEN X,YE H,FAN X,et al. A review of small heat pipes for electronics[J]. Applied Thermal Engineering,2015,96:1-17.
[10] 乔铁梁,崔晓钰,韩华,等. 甲醇/丙酮振荡热管的传热性能研究[J]. 机械工程学报, 2014, 50(18):148-154. QIAO Tieliang,CUI Xiaoyu,HAN Hua,et al. Research of the heat-transfer performance on methanol/acetone oscillating heat pipe[J]. Journal of Mechanical Engineering,2014,50(18):148-154.
[11] SHABANY Y. Heat transfer:Thermal management of electronics[J]. Aip Conference,2009,1088(1):227-230.
[12] FUKUSHIMA K,NAGANO H. New evaporator structure for micro loop heat pipes[J]. International Journal of Heat and Mass Transfer,2017,106:1327-1334.
[13] SINGH M,KONDARAJU S,BAHGA S S. Enhancement of thermal performance of micro heat pipes using wettability gradients[J]. International Journal of Heat and Mass Transfer,2017,104:400-408.
[14] SINGH R, AKBARZADEH A, MOCHIZUKI M. Thermal potential of flat evaporator miniature loop heat pipes for notebook cooling[J]. IEEE Transactions on Components and Packaging Technologies, 2010, 33(1):32-45.
[15] ZHOU G,LI J,LÜ L. An ultra-thin miniature loop heat pipe cooler for mobile electronics[J]. Applied Thermal Engineering,2016,109:514-523.
[16] LI Y,HE J,HE H,et al. Investigation of ultra-thin flattened heat pipes with sintered wick structure[J]. Applied Thermal Engineering,2015,86:106-118.
[17] LI Y,ZHOU W,HE J,et al. Thermal performance of ultra-thin flattened heat pipes with composite wick structure[J]. Applied Thermal Engineering,2016,102:487-499.
[18] MAYDANIK Y F. Loop heat pipes[J]. Applied Thermal Engineering,2005,25(5-6):635-657.
[19] 徐计元, 邹勇, 程林. 环路热管复合毛细芯的孔结构优化与性能研究[J]. 中国机电工程学报,2012,32(23):70-74. XU Jiyuan,ZOU Yong,CHENG Lin. Pore structure optimization and properties of composite wicks for looped heat pipes[J]. Proceedings of the CSEE,2012,32(23):70-74.
[20] BUFFONE C, COULLOUX J, ALONSO B, et al. Capillary pressure in graphene oxide nanoporous membranes for enhanced heat transport in loop heat pipes for aeronautics[J]. Experimental Thermal and Fluid Science,2016,78:147-152.
[21] LI J,LIN F,WANG D M,et al. A loop-heat-pipe heat sink with parallel condensers for high-power integrated LED chips[J]. Applied Thermal Engineering,2013,56(1-2):18-26.
[22] MAYDANIK Y F,CHERNYSHEVA M A,PASTUKHOV V G. Review:Loop heat pipes with flat evaporators[J]. Applied Thermal Engineering,2014,67(1-2):294-307.
[23] MAHMOUD N A. Reproducing hoop stress-strain behavior for tubular material using lateral compression test[J]. International Journal of Mechanical Sciences,2003,45:605-621.
[24] GUPTA N K,SEKHON G S,GUPTA P K. Study of lateral compression of round metallic tubes[J]. Thin-walled Structures,2005,43:895-922.
[25] LAILA S B. Analysis of flow and stresses in flattening a circular tube by rolling[J]. Journal of Materials Processing Technology,2002,128:130-135.
[26] JIANG L,TANG Y,PAN M,et al. Phase change flattening process for axial grooved heat pipe[J]. Journal of Materials Processing Technology,2012,212:331-338.
[27] TANG Y,DENG D,HUANG G,et al. Effect of fabrication parameters on capillary performance of composite wicks for two-phase heat transfer devices[J]. Energy Conversion and Management,2013,66(1):66-76.
[28] DENG D,LIANG D,TANG Y,et al. Evaluation of capillary performance of sintered porous wicks for loop heat pipe[J]. Experimental Thermal and Fluid Science,2013,50(10):1-9.
[29] BYON C,KIM S J. Capillary performance of bi-porous sintered metal wicks[J]. International Journal of Heat and Mass Transfer,2012,55(15-16):4096-4103.
[30] 蒋乐伦. 扁平热管微孔槽烧结复合吸液芯成形及传热性能研究[D]. 广州:华南理工大学,2011. JIANG Lelun. Manufacture and thermal performance of sintered-grooved composite wick in the flattened heat pipe[D]. Guangzhou:South China University of Technology,2011.
[31] AOKI H,IKEDA M,KIMURA Y. Ultra thin heat pipe and its application[J]. Frontiers in Heat Pipes,2011,2:1-5.
[32] KOJI Y,KENJI N,HIDEAKI K,et al. Micro heat-pipe with 1-mm thickness[J]. Furukawa Review,2002,22:1-2.
[33] AOKI H,SHIOYA N,IKEDA M,et al. Development of ultra thin plate-type heat pipe with less than 1 mm thickness[C]//Semiconductor Thermal Measurement and Management Symposium,February 21-25,2010,Santa Clara,CA,United states:IEEE,2010:1065-2221.
[34] 白豪. 超薄热管的扁状薄化编织网毛细结构及其超薄热管结构:中国,201310734439.2[P]. 2013-12-23. BAI Hao. The structure of flat-thin mesh wick and ultra-thin heat pipe:China,201310734439.2[P]. 2013-12-23.
[35] OSHMAN C,QIAN L,LIEW L A,et al. Flat flexible polymer heat pipes[J]. Journal of Micromechanics and Microengineering,2013,23:1-6.
[36] TANG Y,TANG H,LI J,et al. Experimental investigation of capillary force in a novel sintered copper mesh wick for ultra-thin heat pipes[J]. Applied Thermal Engineering,2017,115:1020-1030.
[37] HU J,YUAN W,YAN Z,et al. Fabricating an enhanced stable superhydrophobic surface on copper plates by introducing a sintering process[J]. Applied Surface Science,2015,355:145-152.
[38] LEE K. Ultra thin heat pipe:US,US20100266864 A1[P]. 2010-10-21.
[39] 何恒飞. 压扁型超薄烧结式微热管制造方法及性能分析[D]. 广州:华南理工大学,2014. HE Hengfei. Manufacturing process and performance analysis of ultra-thin flattened micro heat pipe sintered with copper powder[D]. Guangzhou:South China University of Technology,2014.
[40] ZHANG L W. An experimental study on applying miniature loop heat pipes for laptop PC cooling[EB/OL].[2016-01]. https://community.asme.org/….pdf.
[41] DING C,GAURAV S,PAYAM B,et al. A flat heat pipe architecture based on nanostructured titania[J]. Journal of Microelectromechanical Systems,2010,19(4):878-884.
[42] KANG S W, HUANG D. Fabrication of star grooves and rhombus grooves micro heat pipe[J]. Journal of Micromechanics and Microengineering,2002,12:525-531.
[43] GILLOT C,AVENAS Y,CEZAC N,et al. Silicon heat pipes used as thermal spreaders[J]. IEEE Transactions on Components and Packaging Technologies,2003,26(2):332-339.
[44] IVANOVA M,LAI A,GILLOT C,et al. Design,fabrication and test of silicon heat pipes with radial microcapillary grooves[C]//Thermal and Thermomechanical Phenomena in Electronics Systems,May 30-June 2,2006, San Diego,CA. New York:IEEE,2006:1087-9870.
[45] WANG Z,ZHANG N,JIAO B,et al. Investigation of thermal characteristics and two-phase flows of a star-shape thin heat pipe[J]. Applied Thermal Engineering,2016,103:9-15.
[46] LEWIS R,LIEW L A,XU S,et al. Microfabricated ultra-thin all-polymer thermal ground planes[J]. Science Bulletin,2015,60(7):701-706.
[47] POPOVA N,SCHAEFFER C,AVENAS Y,et al. Fabrication and experimental investigation of innovative sintered very thin copper heat pipes for electronics applications[C]//Power Electronics Specialists Conference,June 18-22,2006,Jeju,Korea. New York:IEEE,2006,120(6):1-5.
[48] POPOVA N,SCHAEFFER C,AVENAS Y,et al. Fabrication and thermal performance of a thin flat heat pipe with innovative sintered copper wick structure[C]//Industry Applications Conference,October 8-12,2006,Tampa,FL. New York:IEEE,2006:0197-2618.
[49] KAMENOVA L,AVENAS Y,SCHAEFFER C,et al. DBC technology for extremely thin flat heat pipes[J]. Industry Applications,IEEE Transactions on,2009,45(5):1763-1769.
[50] 朱胜利. 一种超薄热管:中国,201310469903.X[P]. 2013-10-10. ZHU Shengli. An ultra-thin heat pipe:China, 201310469903.X[P]. 2013-10-10.
[51] LI J,LV L. Experimental studies on a novel thin flat heat pipe heat spreader[J]. Applied Thermal Engineering,2016,93:139-146.
[52] LV L, LI J. Effect of charging ratio on thermal performance of a miniaturized two-phase super-heat-spreader[J]. International Journal of Heat and Mass Transfer,2017,104:489-492.
[53] 何嘉斌. 复合吸液芯超薄微热管制造工艺及传热性能分析[D]. 广州:华南理工大学, 2015. HE Jiabin. Fabrication process and thermal performance analysis of ultra-thin flattened micro heat pipe sintered with composited wick structure[D]. Guangzhou:South China University of Technology,2015.
[54] 徐计元,邹勇. 环路热管毛细结构的研究进展[J]. 中国电机工程学报,2013,33(8):65-73. XU Jiyuan,ZOU Yong. Research and development of capillary structure in loop heat pipe[J]. proceedings of the CSEE,2013,33(8):65-73.
[55] 李强,周海迎,宣益民. 复合结构毛细蒸发器传热特性研究[J]. 工程热物理学报,2008,29(1):148-150. LI Qiang,ZHOU Haiying,XUAN Yimin. Investigation on heat transfer characteristics of composite capillary evaporator[J]. Journal of Engineering Thermophysics,2008,29(1):148-150.
[56] SEMENIC T,LIN Y Y,CATTON I,et al. Use of biporous wicks to remove high heat fluxes[J]. Applied Thermal Engineering,2008,28(4):278-283.
[57] SEMENIC T,CATTON I. Experimental study of biporous wicks for high heat flux applications[J]. International Journal of Heat and Mass Transfer,2009,52(21-22):5113-5121．
[58] YEH C C,CHEN C N,CHEN Y M. Heat transfer analysis of a loop heat pipe with biporous wicks[J]. International Journal of Heat and Mass Transfer,2009,52(19):4426-4434.
[59] KISEEV V W,VLASSOV V V,MURAOKA I. Experimental optimization of capillary structures for looped heat pipes and heat switches[J]. Applied Thermal Engineering,2010,30:1312-1319.
[60] LIN Z R,LIN W Z,ZHANG L W,et al. An experimental study on applying miniature loop heat pipes for laptop PC cooling[J]. Annual IEEE Semiconductor Thermal Measurement and Management Symposium,2013,154-158.
[61] MAYDANIK Y F,PASTUKHOV V G,CHERNYSHEVA M A. Development and investigation of a miniature copper-acetone loop heat pipe with a flat evaporator[J]. Journal of Electronics Cooling and Thermal Control,2015,5(4):77-88.
[62] FUKUSHIMA K,NAGANO H. New evaporator structure for micro loop heat pipes[J]. International Journal of Heat and Mass Transfer,2017,106:1327-1334.
[63] HONG S,ZHANG X,WANG S,et al. Experiment study on heat transfer capability of an innovative gravity assisted ultra-thin looped heat pipe[J]. International Journal of Thermal Sciences,2015,95:106-114.
[64] 汪双凤,洪思慧,唐永乐,等. 一种改进型的超薄环路热管:中国,201510255962.6[P]. 2015-05-18. WANG Shuangfeng, HONG Sihui, TANG Yongle, et al. An innovative ultra-thin looped heat pipe:China,201510255962.6[P]. 2015-05-18.
[65] HONG S,ZHANG X,TANG Y,et al. Experiment research on the effect of the evaporator’s configuration design of an innovative ultra-thin looped heat pipe[J]. International Journal of Heat and Mass Transfer,2016,92:497-506.
[66] HONG S,WANG S,ZHANG Z. Multiple orientations research on heat transfer performances of ultra-thin loop heat pipes with different evaporator structures[J]. International Journal of Heat and Mass Transfer,2016,98:415-425.
[67] ANTON S. Fujitsu develops ultra-thin heat-pipes to cool-down mobile devices[EB/OL].[2015-03-14]. http://www.kitguru.net/components/cooling/anton-shilov/fujitsu-develops-ultra-thin-loop-heat-pipes-to-cool-down-ultra-thin-devices/.
[68] SHIOGA T,MIZUNO Y. Micro loop heat pipe for mobile electronics applications[C]//Thermal Measurement, Modeling and Management Symposium. Proceedings of a meeting held 15-19 March 2015,San Jose,CA. New York:IEEE,2015:50-55.

超薄微热管的研究现状及发展趋势

Development Status and Perspective Trend of Ultra-thin Micro Heat Pipe

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	孙雨欣, 蔡守宇, 张旭, 王珂. 基于自适应特征驱动法的散热结构拓扑优化设计[J]. 机械工程学报, 2024, 60(15): 346-357.
[2]	肖蜜, 李奇石, 高亮, 沙伟, 黄明喆. 基于各向异性材料插值的点阵散热结构跨尺度拓扑优化[J]. 机械工程学报, 2024, 60(13): 71-80.
[3]	黄明喆, 肖蜜, 刘喜亮, 沙伟, 周冕, 高亮. 面向散热性能的多孔结构多尺度等几何拓扑优化[J]. 机械工程学报, 2024, 60(1): 54-64.
[4]	伍春霞, 唐恒, 张仕伟, 孙亚隆, 伍晓宇, 汤勇. 平板热管沟槽吸液芯结构刻蚀制造研究进展[J]. 机械工程学报, 2023, 59(24): 140-155.
[5]	张立军, 刘世博, 甘振威, 徐嘉怡, 杨宁, 杨博涵, 王杭. 合成射流传热特性及其在MEMS散热应用研究[J]. 机械工程学报, 2023, 59(24): 164-176.
[6]	孙宗翰, 田杰, 杜朝辉, 欧阳华. 电子器件散热串联轴流风扇短管降噪试验[J]. 机械工程学报, 2022, 58(22): 406-415.
[7]	陈恭, 汤勇, 张仕伟, 钟桂生, 孙亚隆, 李杰. 超薄均热板的研究现状及发展趋势[J]. 机械工程学报, 2022, 58(12): 197-212.
[8]	汤勇, 孙亚隆, 唐恒, 万珍平, 袁伟. 柔性热管的研究现状与发展趋势[J]. 机械工程学报, 2022, 58(10): 265-279.
[9]	端和平, 姜婷婷, 罗勇水, 申新贺, 李永亮. 基于CFD的风电机组塔筒通风散热数值模拟及优化分析^*[J]. 电气工程学报, 2022, 17(1): 122-128.
[10]	王雅博, 朱信霖, 李雪强, 刘圣春, 李海龙, 熊瑞. 电化学储能系统电池柜散热的影响因素分析^*[J]. 电气工程学报, 2022, 17(1): 225-233.
[11]	黄其,胡斌,康乐,孙金良. 一体化轴流风机系统设计 ^*[J]. 电气工程学报, 2020, 15(1): 62-70.
[12]	李道豫,王圣平,冯文昕,周培,吕刚. 高压直流输电均压电极结垢的解析与改进 ^*[J]. 电气工程学报, 2019, 14(1): 26-29.
[13]	王雷, 贾振元, 朱玉芹, 刘昊, 张黎. 矿用大功率辅助散热式磁力偶合器温度场[J]. 机械工程学报, 2018, 54(18): 187-193.
[14]	王雅博, 诸凯, 崔卓, 魏杰. 冷却水进出方式对芯片散热器换热性能影响[J]. 机械工程学报, 2018, 54(10): 188-194.
[15]	魏啸, 丁晓红. 传热结构自适应拓扑优化准则法研究[J]. 机械工程学报, 2017, 53(20): 153-160.