Journal of Mechanical Engineering

2019, Volume 55 Issue 5 Publication:05 March 2019
Previous Issue Next Issue
Gravity Unloading Precision Analysis of Air Bearing Facility
YANG Guoyong, WANG Hongguang, JIANG Yong, LING Lie, CHANG Yong, GAO Feng, YANG Fan
机械工程学报. 2019, 55 (5): 1-10. doi: 10.3901/JME.2019.05.001
Abstract ( 1256 )    PDF(63798KB) ( 544 )
References | Related Articles | Metrics
Motion Error of Rolling Guide Based on Uncertainty of Geometric Error
MA Yali, LI Yangyang
机械工程学报. 2019, 55 (5): 11-18. doi: 10.3901/JME.2019.05.011
Abstract ( 1200 )    PDF(4832KB) ( 837 )
References | Related Articles | Metrics
Trajectory Tracking Control of Cable-driven Parallel Robots by Using High-speed Vision
YOU Hong, SHANG Weiwei, ZHANG Bin, ZHANG Fei, CONG Shuang
机械工程学报. 2019, 55 (5): 19-26. doi: 10.3901/JME.2019.05.019
Abstract ( 999 )    PDF(14457KB) ( 597 )
References | Related Articles | Metrics
Design and Motion Analysis of a Wheel-walking Bionic Soft Robot
YAO Jiantao, CHEN Xinbo, CHEN Juntao, ZHANG Hong, LI Haili, ZHAO Yongsheng
机械工程学报. 2019, 55 (5): 27-35. doi: 10.3901/JME.2019.05.027
Abstract ( 1551 )    PDF(71184KB) ( 1471 )
References | Related Articles | Metrics
Free Gait Planning for a Hexapod Robot Based on Reinforcement Learning
LI Manhong, ZHANG Minglu, ZHANG Jianhua, TIAN Ying, MA Yanyue
机械工程学报. 2019, 55 (5): 36-44. doi: 10.3901/JME.2019.05.036
Abstract ( 1064 )    PDF(15250KB) ( 494 )
References | Related Articles | Metrics
Design and Analysis of Novel High Performance Plane Trajectory Guidance Mechanisms
GUO Sheng, MIAO Yuting, QU Haibo, ZHAO Fuqun
机械工程学报. 2019, 55 (5): 45-52. doi: 10.3901/JME.2019.05.045
Abstract ( 755 )    PDF(58929KB) ( 639 )
References | Related Articles | Metrics
New 3T1R Parallel Manipulator 2-(RPa3R)3R with Zero Coupling Degree and Partial Decoupling: Design and Kinematics
SHEN Huiping, XU Ke, YANG Tingli, DENG Jiaming
机械工程学报. 2019, 55 (5): 53-64. doi: 10.3901/JME.2019.05.053
Abstract ( 739 )    PDF(70980KB) ( 786 )
References | Related Articles | Metrics
Kinematics and Performance Analysis of a Parallel Manipulator with Remote Center of Motion
YE Wei, YANG Zhen, LI Qinchuan
机械工程学报. 2019, 55 (5): 65-73. doi: 10.3901/JME.2019.05.065
Abstract ( 835 )    PDF(37336KB) ( 839 )
References | Related Articles | Metrics
Snap-through Bifurcation Analysis of Compliant Bistable Structures
ZHAO Jian, CHENG Kai, GAO Renjing, HUANG Yu, LIU Pengbo
机械工程学报. 2019, 55 (5): 74-81. doi: 10.3901/JME.2019.05.074
Abstract ( 682 )    PDF(17066KB) ( 400 )
References | Related Articles | Metrics
Dynamic Characteristics Analysis of Wind Turbine under Emergency Shutdown Events
CHEN Xu, ZHU Caichao, SONG Chaosheng, TAN Jianjun, ZHU Yongchao
机械工程学报. 2019, 55 (5): 82-88. doi: 10.3901/JME.2019.05.082
Abstract ( 769 )    PDF(14655KB) ( 293 )
References | Related Articles | Metrics
Mechanical Analysis and Controller Design of the Permanent Magnetic Variable Stiffness Flexible Joint
ZHANG Ming, FANG Lijin, SUN Feng, OKA Koichi
机械工程学报. 2019, 55 (5): 89-96. doi: 10.3901/JME.2019.05.089
Abstract ( 916 )    PDF(17851KB) ( 507 )
References | Related Articles | Metrics
Modeling and Stress Analysis of Brake Hub of EMU Train under Running State
QI Hongyuan, QIN Fangfang, ZHANG Lei, SHEN Lin, HAO Wenxiao, ZHOU Yongjie, YIN Fang
机械工程学报. 2019, 55 (5): 97-103. doi: 10.3901/JME.2019.05.097
Abstract ( 621 )    PDF(6549KB) ( 438 )
References | Related Articles | Metrics
Time-optimal Motion Profile Planning Considering Damping Attenuation for Point to Point Operation
BAI Youdun, CHEN Xin, YANG Zhijun
机械工程学报. 2019, 55 (5): 104-112. doi: 10.3901/JME.2019.05.104
Abstract ( 692 )    PDF(13126KB) ( 327 )
References | Related Articles | Metrics
Dynamic Modeling and Simulation of Shield Tunneling Cutter-head in Oscillatory Excavation
JIANG Jiandong, ZHANG Enguang, ZHAO Yingdi, LI Congcong, QIAO Xin
机械工程学报. 2019, 55 (5): 113-120. doi: 10.3901/JME.2019.05.113
Abstract ( 881 )    PDF(8470KB) ( 582 )
References | Related Articles | Metrics
Vibration Analysis of Ultrasonic Longitudinal-torsional Composite Hollow Horn
ZHAO Bo, YIN Sen, WANG Xiaobo, ZHAO Chongyang
机械工程学报. 2019, 55 (5): 121-129. doi: 10.3901/JME.2019.05.121
Abstract ( 795 )    PDF(65834KB) ( 663 )
References | Related Articles | Metrics
Quantitative Evaluation and Error Sensitivity Analysis of Accuracy Retentivity of CNC Machine Tools
WANG Yongqing, WU Jiakun, LIU Kuo, LIU Haibo, LIU Zhisong, LIAN Meng
机械工程学报. 2019, 55 (5): 130-136. doi: 10.3901/JME.2019.05.130
Abstract ( 1189 )    PDF(10236KB) ( 887 )
References | Related Articles | Metrics
Experimental Study on the Effectiveness of Two Different Geometric Error Modeling Methods for Machine Tools
DONG Zeyuan, LI Jie, LIU Xinjun, MEI Bin, CHEN Junyu
机械工程学报. 2019, 55 (5): 137-147. doi: 10.3901/JME.2019.05.137
Abstract ( 1044 )    PDF(17909KB) ( 1145 )
References | Related Articles | Metrics
Analyzing Method for Service & Remanufacturing performance of Engine Crankshaft Based on Collision Energy Consumption Model with Wearing Clearance
KE Qingdi, ZHAN Wei, SONG Shouxu, LIU Guangfu
机械工程学报. 2019, 55 (5): 148-155. doi: 10.3901/JME.2019.05.148
Abstract ( 720 )    PDF(41425KB) ( 445 )
References | Related Articles | Metrics
Braking Performance and Constant Torque Controlling of Frictional-magnetic Compound Brake
BAO Jiusheng, JI Yangyang, YIN Yan, HUANG Shan
机械工程学报. 2019, 55 (5): 156-165. doi: 10.3901/JME.2019.05.156
Abstract ( 729 )    PDF(49246KB) ( 406 )
References | Related Articles | Metrics
Time Optimal Trajectory Planning of Excavator
SUN Zhiyi, ZHANG Yunyue, LI Hong, SUN Qianlai, WANG Yin
机械工程学报. 2019, 55 (5): 166-174. doi: 10.3901/JME.2019.05.166
Abstract ( 1036 )    PDF(11747KB) ( 391 )
References | Related Articles | Metrics
Recent Progress on the Efficiency Increasing Methods of Minimum Quantity Lubrication Technology in Green Cutting

YUAN Songmei, HAN Wenliang, ZHU Guangyuan, HOU Xuebo, WANG Li
Journal of Mechanical Engineering. 2019, 55 (5): 175-185. doi: 10.3901/JME.2019.05.175
Abstract ( 913 )    PDF(24337KB) ( 405 )
References | Related Articles | Metrics
Surface Integrity of Quartz Glass Induced by Ultra-precision Grinding
GAO Shang, GENG Zongchao, WU Yueqin, WANG Ziguang, KANG Renke
机械工程学报. 2019, 55 (5): 186-195. doi: 10.3901/JME.2019.05.186
Abstract ( 1062 )    PDF(77202KB) ( 1065 )
References | Related Articles | Metrics
Research on Grinding of Micro Ball End Mill with Equal Normal Rake Angle and Equal Radial Relief Angle
LIANG Zhiqiang, LI Shidi, ZHOU Tianfeng, GAO Peng, ZHANG Dongdong, WANG Xibin
机械工程学报. 2019, 55 (5): 196-203. doi: 10.3901/JME.2019.05.196
Abstract ( 716 )    PDF(47740KB) ( 312 )
References | Related Articles | Metrics
Air Cooling System Thermodynamic Analysis and Thermal Balance Control of Dry Cutting Machine Tool
ZHU Libin, CAO Huajun, HUANG Haihong, LIU Zhifeng
机械工程学报. 2019, 55 (5): 204-211. doi: 10.3901/JME.2019.05.204
Abstract ( 716 )    PDF(24584KB) ( 460 )
References | Related Articles | Metrics
Study on Forming Extrusion Cutting (FEC) Producing Fins and Its Forming Performance
ZHANG Jiayang, DENG Wenjun, LIU Liangwei, YIN Xiaolong, XIA Wei
机械工程学报. 2019, 55 (5): 212-222. doi: 10.3901/JME.2019.05.212
Abstract ( 591 )    PDF(155289KB) ( 395 )
References | Related Articles | Metrics
Simulation Analysis and Experimental Study on Chip Removal Conditions of Internal Chip Removal Bits for CFRP Machining
WANG Yiwen, XU Chengyang, XU Jiazhong, LIU Xianli
机械工程学报. 2019, 55 (5): 223-231. doi: 10.3901/JME.2019.05.223
Abstract ( 838 )    PDF(99440KB) ( 516 )
References | Related Articles | Metrics
Investigation of Plasma Volt-ampere Characteristics and Gap Modeling of EDM
LI Shujuan, XIN Bin, YANG Yuxiang, LU Xiong, LI Yan, JIANG Bailing, JIA Zhen, LI Yuxi
机械工程学报. 2019, 55 (5): 232-240. doi: 10.3901/JME.2019.05.232
Abstract ( 623 )    PDF(11363KB) ( 354 )
References | Related Articles | Metrics
Study on Instantaneous Tool Deflections Considering Tool Run-out in Micro Milling Process
ZHANG Xuewei, YU Tianbiao, WANG Wanshan
机械工程学报. 2019, 55 (5): 241-248. doi: 10.3901/JME.2019.05.241
Abstract ( 717 )    PDF(55428KB) ( 546 )
References | Related Articles | Metrics